CHRONOMITE LABS
Pertanyaan yang Sering Diajukan
Pertanyaan umum tentang CHRONOMITE LABS dari 3G Electric.
What are the typical applications for Chronomite Labs mini-tank water heaters?
Chronomite Labs mini-tank water heaters are designed for light-duty residential use, but they are also suitable for industrial settings where point-of-use hot water is needed. Common applications include providing hot water to break rooms, wash stations, or small laboratories in manufacturing facilities. Their compact size allows installation under sinks or in tight spaces, and they operate on standard 110/120V AC power, making them easy to integrate into existing electrical systems.
What is the power requirement for Chronomite Labs CMT series water heaters?
The Chronomite Labs CMT series mini-tank water heaters, including models CMT-1.3, CMT-2.5, and CMT-4.0, require a 110/120V AC single-phase power supply with a 1,440 W rating. This corresponds to a current draw of approximately 12 amps at 120V. They are designed for standard residential electrical circuits and do not require special wiring, though a dedicated circuit is recommended to avoid overloading.
How do Chronomite Labs mini-tank heaters compare to larger tank-style water heaters in terms of efficiency?
Chronomite Labs mini-tank heaters reduce standby heat loss because they are installed at the point of use, meaning hot water does not travel through long pipes. This can improve energy efficiency for applications with intermittent hot water demand. However, their small capacity (1.3 to 4 gallons) limits their ability to supply high volumes of hot water continuously. They are best suited for low-flow fixtures like hand sinks or small dishwashers.
What safety certifications do Chronomite Labs water heaters have?
Chronomite Labs mini-tank water heaters are designed to meet UL standards for safety and performance, specifically UL 174 for electric water heaters. They include built-in temperature and pressure relief valves and thermal cutoffs to prevent overheating. These certifications ensure compliance with North American electrical and plumbing codes, making them suitable for installation in residential and light commercial environments.
Can Chronomite Labs water heaters be used in outdoor or wet locations?
Chronomite Labs mini-tank water heaters are intended for indoor installation only, as they are not rated for outdoor or wet locations. They should be installed in a dry, temperature-controlled environment to prevent freezing or moisture damage. For outdoor applications, a weatherproof enclosure or a heater specifically rated for outdoor use would be required.
Does 3G Electric supply CHRONOMITE LABS products?
Yes — 3G Electric (S) Pte. Ltd. supplies CHRONOMITE LABS products. We stock the CHRONOMITE LABS catalog and supply genuine factory-original products with full manufacturer warranty and technical support.



