We ship to Indonesia — door-to-door, customs and logistics handled by 3G Electric

3G Electric
⌕
RFQ CartGet a QuoteSign inSign up
Eurostop logo

Eurostop

ItalyGas Valves & Regulation

Eurostop manufactures water treatment additives and devices engineered for closed heating systems, condensate lines, and industrial fluid applications. The product line focuses on preventing common operational failures: leakage sealing, scale buildup in condensate systems, and corrosion in oxygen-barrier environments. Eurostop anti-drip devices are specified by density (1.37 g/cm³ typical), vapour pressure (2.20 hPa at 20°C), and maximum leak capacity—for instance, the SP 10 handles up to 10 litres per day. These formulations integrate into existing closed-loop systems without requiring system drain-down, reducing downtime during application. The condensate product range (EURODIS0 for descaling, EURODISF concentrate for unclogging) addresses fouling in low-temperature return lines, a chronic issue in systems running extended hours or processing hard water. Eurostop's chemistry is designed around compatibility with standard circulation pumps, heat exchangers, and oxygen-barrier tube materials found in European and North American installations. Technical datasheets include toxicology data (e.g., LD50 oral values) for safety compliance and handling procedures.

6
In Collection
6
Products
1 Day
Quote Response
Italy
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Show
Page 1 of 1
6 products

About Eurostop

Eurostop manufactures water treatment additives and devices engineered for closed heating systems, condensate lines, and industrial fluid applications. The product line focuses on preventing common operational failures: leakage sealing, scale buildup in condensate systems, and corrosion in oxygen-barrier environments. Eurostop anti-drip devices are specified by density (1.37 g/cm³ typical), vapour pressure (2.20 hPa at 20°C), and maximum leak capacity—for instance, the SP 10 handles up to 10 litres per day. These formulations integrate into existing closed-loop systems without requiring system drain-down, reducing downtime during application. The condensate product range (EURODIS0 for descaling, EURODISF concentrate for unclogging) addresses fouling in low-temperature return lines, a chronic issue in systems running extended hours or processing hard water. Eurostop's chemistry is designed around compatibility with standard circulation pumps, heat exchangers, and oxygen-barrier tube materials found in European and North American installations. Technical datasheets include toxicology data (e.g., LD50 oral values) for safety compliance and handling procedures.

Common Applications

  • District heating networks — Eurostop SP anti-drip devices prevent microleak losses in primary circulation loops rated to 10–400 L/day capacity
  • Commercial HVAC condensate lines — EURODIS0 descaler inhibits scale formation in boiler return piping and low-temperature heat exchangers
  • Industrial closed-loop cooling systems — Eurostop SP 35 and SP 400 seal minor leakage points without system shutdown or fluid replacement
  • Oxygen-barrier radiant heating systems — Eurostop SP 10 maintains fluid integrity in PEX and multilayer tubing with oxygen-diffusion barriers
  • Condensate unclogging maintenance — EURODISF concentrate dissolves sludge and scale blockages in condensate return collection tanks and lift-pump suction lines
Origin: Manufactured in Italy

Related brands we carry

Comparable manufacturers in the same product category.

Parker
SIT
Elektrogas
Dungs
Itron

Frequently asked questions

Common questions about Eurostop from 3G Electric.

What is the maximum leak rate the Eurostop SP 10 anti-drip device is rated to handle?

The Eurostop SP 10 (EST0110) is rated for a maximum leak capacity of 10 litres per day. It is formulated for closed heating systems with oxygen barriers and maintains consistent performance within that sealing envelope. Larger leak volumes may require the SP 35 or SP 400 variants.

Can Eurostop anti-drip products be used in systems already in operation, or do they require system shutdown?

Eurostop anti-drip formulations are designed for in-service application without full system drain-down. They inject into circulating fluid and integrate with existing water; this minimizes downtime during application. Consult product documentation for specific injection protocols and circulation pump compatibility.

What is the difference between Eurostop EURODIS0 and EURODISF condensate treatments?

EURODIS0 is a descaling product targeting mineral and corrosion-scale deposits in condensate return lines. EURODISF is a concentrated unclogging formulation for dissolving existing blockages. Selection depends on whether the system requires preventive scale inhibition or active sludge removal.

What are the key physical properties of Eurostop SP series anti-drip devices?

Eurostop SP formulations (SP 10, SP 35, SP 400) share a density of 1.37 g/cm³ and vapour pressure of 2.20 hPa at 20°C. These properties ensure stable suspension in water and predictable behaviour in closed-loop heating environments. Variants differ in leak-capacity rating and application scope.

Are Eurostop products compatible with oxygen-barrier tube systems?

Yes. Eurostop anti-drip devices, particularly the SP 10, are explicitly engineered for heating systems incorporating oxygen barriers. The formulation chemistry is compatible with barrier-tube materials and oxygen-scavenging environments typical in modern district heating and low-temperature radiant systems.

What safety data should be reviewed before handling Eurostop anti-drip concentrates?

Product safety is documented via LD50 oral toxicity values (e.g., 3400 mg/kg for SP 400). Full safety data sheets, vapour pressure, and handling precautions are available on request. Review these before storage, transportation, and system injection to ensure compliance with local chemical-handling regulations.