YOSHINO

YOSHINO power stations utilize solid-state battery technology, which differs from conventional lithium-ion batteries by using a solid electrolyte instead of a liquid one. This design improves thermal stability, reduces the risk of thermal runaway, and offers a longer cycle life—typically rated for thousands of charge-discharge cycles. The solid-state construction also allows for higher energy density, meaning more capacity in a smaller footprint. For industrial users, this translates to safer operation in demanding environments and reduced replacement frequency over the equipment's lifespan.

No, current YOSHINO portable power station models—including the B330 SST, B660 SST, B2000 SST, and B4000 SST—are not parallel-configuration capable. Each unit operates as a standalone power source. To increase total capacity or power output, you would need to use multiple units independently for separate loads or select a higher-capacity model such as the B4000 SST, which offers 2,611 Wh and 4,000 W continuous output. Always verify load requirements against a single unit's specifications before deployment.

YOSHINO power stations support solar charging via an integrated MC4-to-XT60 input port. The B2000 SST and B4000 SST models include a 9.8 ft (3 m) solar charging cable, while the B330 SST and B660 SST come with shorter cables or adapters. The maximum solar input varies by model; refer to the specific unit's datasheet for voltage and current limits. Solar charging allows for off-grid replenishment in remote locations, making these units suitable for field operations where AC power is unavailable. Note that solar panels are not included and must be sourced separately.

YOSHINO power stations provide a mix of AC outlets (pure sine wave), DC ports (including cigarette lighter and DC5521), USB-A, USB-C, and wireless charging pads on select models. For example, the B2000 SST and B4000 SST include wireless charging, while the B330 SST and B660 SST do not. AC output is rated for continuous and surge loads as specified per model. Always check the port configuration for your intended devices to ensure compatibility, especially for sensitive electronics that require pure sine wave power.

Select a YOSHINO power station based on your total load wattage and required runtime. Calculate the continuous wattage of all devices you plan to run simultaneously, then choose a model with a rated wattage exceeding that sum. For surge loads (e.g., motors or compressors), ensure the unit's surge capacity covers startup peaks. Capacity (Wh) determines runtime: divide capacity by total load watts to estimate hours. For example, a 1,326 Wh unit powering a 200 W load would run approximately 6.6 hours. The B4000 SST (2,611 Wh, 4,000 W) suits heavy equipment, while the B330 SST (241 Wh, 330 W) handles small electronics.

Yes — 3G Electric (S) Pte. Ltd. supplies YOSHINO products. We stock the YOSHINO catalog and supply genuine factory-original products with full manufacturer warranty and technical support.