Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar

Vermont Gage 3G-OTH-278305 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 141205710

13 produk yang kompatibel ditemukan untuk Vermont Gage 3G-OTH-278305. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:141205710VERMONT GAGE

Kecocokan referensi silang untuk “141205710”

“141205710” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

VERMONT GAGE Class X No-Go (Minus) Pin Gauge: 0.0571 in Dia, 0.00004 in Tolerance, 2 in, Uncoated Steel
VERMONT GAGE

VERMONT GAGE Class X No-Go (Minus) Pin Gauge: 0.0571 in Dia, 0.00004 in Tolerance, 2 in, Uncoated Steel

SKU: 3G-OTH-278305
Available by RFQPenawaran + Layanan

Lebih banyak dari Vermont Gage

12 lainnya Vermont Gage produk dalam kisaran yang sama

Vermont Gage Class X No-Go (minus) pin gauge with 0.0099 in diameter and 0.00004 in tolerance, used to verify that a hole does not exceed its maximum allowable size. Made from uncoated steel, 2 in length. Includes Certificate of Accuracy with NIST Traceability.
Vermont Gage

Vermont Gage Class X No-Go (minus) pin gauge with 0.0099 in diameter and 0.00004 in tolerance, used to verify that a hole does not exceed its maximum allowable size. Made from uncoated steel, 2 in length. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-278519
Available by RFQPenawaran + Layanan
Vermont Gage This Class X No-Go pin gauge has a diameter of 0.0267 inches and a tolerance of ±0.00004 inches. It is made of uncoated steel and is 2 inches long. Used for go/no-go inspection of hole diameters to verify that holes do not exceed the maximum allowable size in machining and quality control applications.
Vermont Gage

Vermont Gage This Class X No-Go pin gauge has a diameter of 0.0267 inches and a tolerance of ±0.00004 inches. It is made of uncoated steel and is 2 inches long. Used for go/no-go inspection of hole diameters to verify that holes do not exceed the maximum allowable size in machining and quality control applications.

SKU: 3G-OTH-277670
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with 0.0332 in diameter and 0.00004 in tolerance. Made of uncoated steel, 2 in length. Used for go/no-go inspection of hole diameters to ensure they do not exceed the upper limit. Includes Certificate of Accuracy with NIST Traceability.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.0332 in diameter and 0.00004 in tolerance. Made of uncoated steel, 2 in length. Used for go/no-go inspection of hole diameters to ensure they do not exceed the upper limit. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-277737
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with 0.0331 in diameter and 0.00004 in tolerance. Made of uncoated steel, 2 in length. Used to verify that a hole diameter does not exceed the gauge size; the gauge should not enter the hole if within tolerance. Includes Certificate of Accuracy with NIST Traceability.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.0331 in diameter and 0.00004 in tolerance. Made of uncoated steel, 2 in length. Used to verify that a hole diameter does not exceed the gauge size; the gauge should not enter the hole if within tolerance. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-277736
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with 0.0199 in diameter, 2 in length, and 0.00004 in tolerance. Uncoated steel construction. Used for go/no-go dimensional verification of holes to ensure they do not exceed the specified upper limit.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.0199 in diameter, 2 in length, and 0.00004 in tolerance. Uncoated steel construction. Used for go/no-go dimensional verification of holes to ensure they do not exceed the specified upper limit.

SKU: 3G-OTH-277609
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with 0.0067 inch diameter and 2 inch length. Made of uncoated steel with a tolerance of 0.00004 inches. Used for go/no-go inspection to verify that hole minimum diameter does not exceed specified limit. Includes Certificate of Accuracy with NIST Traceability.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.0067 inch diameter and 2 inch length. Made of uncoated steel with a tolerance of 0.00004 inches. Used for go/no-go inspection to verify that hole minimum diameter does not exceed specified limit. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-278492
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (minus) pin gauge with a diameter of 0.0583 inches and a tolerance of 0.00004 inches. Made from uncoated steel, this 2-inch long gauge is used to verify that a hole does not exceed its upper tolerance limit. Includes a Certificate of Accuracy with NIST Traceability.
Vermont Gage

Vermont Gage Class X No-Go (minus) pin gauge with a diameter of 0.0583 inches and a tolerance of 0.00004 inches. Made from uncoated steel, this 2-inch long gauge is used to verify that a hole does not exceed its upper tolerance limit. Includes a Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-278316
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with 0.0162 in diameter, 2 in length, and 0.00004 in tolerance. Made from uncoated steel. Used for go/no-go dimensional verification of hole diameters to ensure they do not exceed the upper tolerance limit in machining and quality control applications.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.0162 in diameter, 2 in length, and 0.00004 in tolerance. Made from uncoated steel. Used for go/no-go dimensional verification of hole diameters to ensure they do not exceed the upper tolerance limit in machining and quality control applications.

SKU: 3G-OTH-277579
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.0616 inches, tolerance of 0.00004 inches, and 2-inch length. Made of uncoated steel. Used for go/no-go dimensional verification of hole diameters to ensure they do not exceed the upper tolerance limit. Includes Certificate of Accuracy with NIST Traceability.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.0616 inches, tolerance of 0.00004 inches, and 2-inch length. Made of uncoated steel. Used for go/no-go dimensional verification of hole diameters to ensure they do not exceed the upper tolerance limit. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-278348
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge for dimensional verification of hole diameters. Uncoated steel construction with 0.00004 in tolerance. Used in machining and quality control to check that holes do not exceed the 0.0661 in upper limit.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge for dimensional verification of hole diameters. Uncoated steel construction with 0.00004 in tolerance. Used in machining and quality control to check that holes do not exceed the 0.0661 in upper limit.

SKU: 3G-OTH-278384
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with 0.0444 in diameter, 2 in length, made of uncoated steel. Tolerance of 0.00004 in. Used for go/no-go inspection of hole diameters to verify that holes do not exceed maximum allowable size in machining and quality control applications.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.0444 in diameter, 2 in length, made of uncoated steel. Tolerance of 0.00004 in. Used for go/no-go inspection of hole diameters to verify that holes do not exceed maximum allowable size in machining and quality control applications.

SKU: 3G-OTH-277845
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go pin gauge for dimensional verification of hole diameters. Diameter 0.0665 in, tolerance ±0.00004 in, length 2 in. Uncoated steel construction. Includes Certificate of Accuracy with NIST Traceability. Used in go/no-go inspection to ensure holes do not exceed the specified upper limit.
Vermont Gage

Vermont Gage Class X No-Go pin gauge for dimensional verification of hole diameters. Diameter 0.0665 in, tolerance ±0.00004 in, length 2 in. Uncoated steel construction. Includes Certificate of Accuracy with NIST Traceability. Used in go/no-go inspection to ensure holes do not exceed the specified upper limit.

SKU: 3G-OTH-278388
Available by RFQPenawaran + Layanan