Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar

Vermont Gage 3G-OTH-275437 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 141234880

13 produk yang kompatibel ditemukan untuk Vermont Gage 3G-OTH-275437. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:141234880VERMONT GAGE

Kecocokan referensi silang untuk “141234880”

“141234880” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

VERMONT GAGE Class X No-Go Pin Gauge: 0.3488 in Dia
VERMONT GAGE

VERMONT GAGE Class X No-Go Pin Gauge: 0.3488 in Dia

SKU: 3G-OTH-275437
Available by RFQPenawaran + Layanan

Lebih banyak dari Vermont Gage

12 lainnya Vermont Gage produk dalam kisaran yang sama

Vermont Gage Class X No-Go (Minus) pin gauge with diameter 0.4019 in, tolerance �±0.00004 in, and 2 in length. Made from uncoated steel. Used to verify that a hole does not exceed its specified upper diameter limit in precision machining and manufacturing quality control.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with diameter 0.4019 in, tolerance ±0.00004 in, and 2 in length. Made from uncoated steel. Used to verify that a hole does not exceed its specified upper diameter limit in precision machining and manufacturing quality control.

SKU: 3G-OTH-275406
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.2964 in and tolerance of 0.00004 in. Made of uncoated steel, 2 in length. Used to verify that a hole does not exceed its maximum allowable size in quality control and inspection applications.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.2964 in and tolerance of 0.00004 in. Made of uncoated steel, 2 in length. Used to verify that a hole does not exceed its maximum allowable size in quality control and inspection applications.

SKU: 3G-OTH-276114
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.3612 in, tolerance of 0.00004 in, and 2 in length. Made of uncoated steel. Used to verify that a hole does not exceed the specified upper size limit; the gauge should not enter the hole if within tolerance.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.3612 in, tolerance of 0.00004 in, and 2 in length. Made of uncoated steel. Used to verify that a hole does not exceed the specified upper size limit; the gauge should not enter the hole if within tolerance.

SKU: 3G-OTH-275566
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.3660 inches and a tolerance of ±0.00004 inches. Made from uncoated steel, this 2-inch long gauge is used to verify the minimum allowable hole diameter in precision machining and quality control applications. Includes a Certificate of Accuracy with NIST Traceability.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.3660 inches and a tolerance of ±0.00004 inches. Made from uncoated steel, this 2-inch long gauge is used to verify the minimum allowable hole diameter in precision machining and quality control applications. Includes a Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-275611
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with diameter 0.3403 in, tolerance 0.00004 in, and length 2 in. Made of uncoated steel. Used for go/no-go dimensional verification of holes or slots in manufacturing and quality control, ensuring features do not exceed maximum allowable size.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with diameter 0.3403 in, tolerance 0.00004 in, and length 2 in. Made of uncoated steel. Used for go/no-go dimensional verification of holes or slots in manufacturing and quality control, ensuring features do not exceed maximum allowable size.

SKU: 3G-OTH-276530
Available by RFQPenawaran + Layanan
Vermont Gage This Class X No-Go (minus) pin gauge has a diameter of 0.4001 inches and a tolerance of ±0.00004 inches. It is made of uncoated steel and is 2 inches long. Used to verify that a hole does not exceed its maximum allowable diameter; the gauge should not enter the hole if the hole is within tolerance.
Vermont Gage

Vermont Gage This Class X No-Go (minus) pin gauge has a diameter of 0.4001 inches and a tolerance of ±0.00004 inches. It is made of uncoated steel and is 2 inches long. Used to verify that a hole does not exceed its maximum allowable diameter; the gauge should not enter the hole if the hole is within tolerance.

SKU: 3G-OTH-275818
Available by RFQPenawaran + Layanan
Vermont Gage This Class X No-Go pin gauge is used to verify that a hole does not exceed its specified maximum diameter. With a diameter of 0.3567 inches and a tolerance of 0.00004 inches, it is made from uncoated steel and includes a Certificate of Accuracy with NIST Traceability. In quality control, the No-Go member must not enter the hole; if it does, the hole is oversized and out of tolerance.
Vermont Gage

Vermont Gage This Class X No-Go pin gauge is used to verify that a hole does not exceed its specified maximum diameter. With a diameter of 0.3567 inches and a tolerance of 0.00004 inches, it is made from uncoated steel and includes a Certificate of Accuracy with NIST Traceability. In quality control, the No-Go member must not enter the hole; if it does, the hole is oversized and out of tolerance.

SKU: 3G-OTH-275941
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with 0.3984 in diameter, 2 in length, and ±0.00004 in tolerance. Made of uncoated steel. Used to verify that a hole does not exceed its specified upper size limit in quality control and inspection applications.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.3984 in diameter, 2 in length, and ±0.00004 in tolerance. Made of uncoated steel. Used to verify that a hole does not exceed its specified upper size limit in quality control and inspection applications.

SKU: 3G-OTH-275805
Available by RFQPenawaran + Layanan
Vermont Gage This Class X No-Go (minus) pin gauge is used for go/no-go inspection of hole diameters in machining and quality control. With a diameter of 0.3989 in and tolerance of 0.00004 in, it verifies that a hole does not exceed the specified size. Made of uncoated steel, it includes a Certificate of Accuracy with NIST Traceability.
Vermont Gage

Vermont Gage This Class X No-Go (minus) pin gauge is used for go/no-go inspection of hole diameters in machining and quality control. With a diameter of 0.3989 in and tolerance of 0.00004 in, it verifies that a hole does not exceed the specified size. Made of uncoated steel, it includes a Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-275807
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (minus) pin gauge with 0.3940 in diameter, 2 in length, and 0.00004 in tolerance. Made of uncoated steel. Used as a no-go inspection tool to verify that hole diameters do not exceed the specified size in quality control applications.
Vermont Gage

Vermont Gage Class X No-Go (minus) pin gauge with 0.3940 in diameter, 2 in length, and 0.00004 in tolerance. Made of uncoated steel. Used as a no-go inspection tool to verify that hole diameters do not exceed the specified size in quality control applications.

SKU: 3G-OTH-275769
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.2816 inches, tolerance of 0.00004 inches, and 2-inch length. Made of uncoated steel. Used for go/no-go inspection to verify that hole diameters do not exceed the upper limit, ensuring dimensional accuracy in machining and quality control applications.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.2816 inches, tolerance of 0.00004 inches, and 2-inch length. Made of uncoated steel. Used for go/no-go inspection to verify that hole diameters do not exceed the upper limit, ensuring dimensional accuracy in machining and quality control applications.

SKU: 3G-OTH-275977
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with 0.3493 in diameter, 2 in length, and ±0.00004 in tolerance. Made from uncoated steel. Used for go/no-go inspection of hole diameters to verify that holes do not exceed upper dimensional limits in machining and quality control applications. Includes Certificate of Accuracy with NIST Traceability.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.3493 in diameter, 2 in length, and ±0.00004 in tolerance. Made from uncoated steel. Used for go/no-go inspection of hole diameters to verify that holes do not exceed upper dimensional limits in machining and quality control applications. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-275442
Available by RFQPenawaran + Layanan