Vermont Gage 3G-OTH-275525 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 141235600

13 produk yang kompatibel ditemukan untuk Vermont Gage 3G-OTH-275525. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:141235600VERMONT GAGE

Kecocokan referensi silang untuk “141235600”

“141235600” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

VERMONT GAGE

VERMONT GAGE Class X No-Go (Minus) Pin Gauge - Dia. 0.3560 in

SKU: 3G-OTH-275525

Lihat Detail Penawaran + Layanan

Lebih banyak dari Vermont Gage

12 lainnya Vermont Gage produk dalam kisaran yang sama

Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge used for precision dimensional inspection of hole diameters. With a diameter of 0.3921 inches and tolerance of 0.00004 inches, it verifies that a hole does not exceed the specified size. Made of uncoated steel, 2 inches long. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-275469

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.3482 in diameter, 2 in length, and ±0.00004 in tolerance. Made from uncoated steel. Used to verify that a hole does not exceed the specified size in precision inspection applications.

SKU: 3G-OTH-275431

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go pin gauge for verifying that a hole does not exceed 0.3584 inches. Made of uncoated steel with a tolerance of ±0.00004 inches. Used in machining and quality control to check hole size limits. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-275539

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage This Class X No-Go pin gauge is used to verify that a hole does not exceed its specified maximum diameter. With a diameter of 0.3567 inches and a tolerance of 0.00004 inches, it is made from uncoated steel and includes a Certificate of Accuracy with NIST Traceability. In quality control, the No-Go member must not enter the hole; if it does, the hole is oversized and out of tolerance.

SKU: 3G-OTH-275941

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.3536 in diameter, 2 in length, uncoated steel construction, and 0.00004 in tolerance. Used to verify that a hole does not exceed its specified upper size limit in precision machining and inspection applications.

SKU: 3G-OTH-275505

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage This Class X No-Go (Minus) pin gauge has a diameter of 0.3014 in and a tolerance of 0.00004 in. It is 2 in long and made of uncoated steel. Used in quality control to verify that a hole does not exceed its maximum allowable diameter; the gauge should not enter the hole if the hole is within tolerance.

SKU: 3G-OTH-275451

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (minus) pin gauge with a diameter of 0.3368 in and tolerance of ±0.00004 in. Made from uncoated steel, this 2 in long gauge is used for go/no-go dimensional verification of hole diameters in machining and quality control applications. Includes a Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-276498

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (minus) pin gauge for verifying that a hole does not exceed the specified upper size limit. Diameter 0.3782 in, tolerance ±0.00004 in, length 2 in. Uncoated steel construction. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-275638

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (minus) pin gauge with 0.4014 in diameter and 0.00004 in tolerance. Made from uncoated steel, 2 in length. Used for dimensional inspection to verify that hole diameters do not exceed the upper tolerance limit. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-275403

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed the specified diameter. It is made of uncoated steel with a tolerance of 0.00004 in and a length of 2 in. Suitable for precision inspection in manufacturing quality control.

SKU: 3G-OTH-275968

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (minus) pin gauge with a diameter of 0.2829 in and tolerance of 0.00004 in. Made of uncoated steel, 2 in length. Used to verify that a machined hole does not exceed the specified upper size limit; the gauge should not enter the hole if within tolerance.

SKU: 3G-OTH-275990

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (minus) pin gauge with 0.3009 in diameter, 2 in length, uncoated steel construction, and ±0.00004 in tolerance. Used to verify that a hole diameter does not exceed the specified size in machining and quality control applications.

SKU: 3G-OTH-275881

Lihat Detail Penawaran + Layanan