Vermont Gage 3G-OTH-288889 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 141251570

13 produk yang kompatibel ditemukan untuk Vermont Gage 3G-OTH-288889. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:141251570VERMONT GAGE

Kecocokan referensi silang untuk “141251570”

“141251570” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

VERMONT GAGE

VERMONT GAGE Class X No-Go (Minus) Pin Gauge - Dia. 0.5157 in

SKU: 3G-OTH-288889

Lihat Detail Penawaran + Layanan

Lebih banyak dari Vermont Gage

12 lainnya Vermont Gage produk dalam kisaran yang sama

Vermont Gage

Vermont Gage This Class X No-Go (minus) pin gauge is used to verify that a hole does not exceed its maximum allowable size. Made of uncoated steel with a tolerance of 0.00004 in, it is 2 in long and includes a Certificate of Accuracy with NIST Traceability. Typical applications include quality control inspection in machining and manufacturing.

SKU: 3G-OTH-289926

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.5734 in diameter, 2 in length, uncoated steel, and 0.00004 in tolerance. Used for go/no-go inspection of hole diameters to verify that holes do not exceed the upper limit. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-289441

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge for dimensional verification of hole diameters. Uncoated steel, 2 in length, with tolerance of 0.00004 in. Used in machining and quality control to check that holes do not exceed the upper limit.

SKU: 3G-OTH-289461

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.5773 in diameter, 2 in length, and 0.00004 in tolerance. Made of uncoated steel. Used for go/no-go inspection of holes within the 0.5101 in to 0.6350 in diameter range to verify that a hole does not exceed the upper limit.

SKU: 3G-OTH-289477

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage This Class X No-Go (Minus) pin gauge is used for go/no-go dimensional verification of hole diameters, ensuring holes do not exceed the upper tolerance limit. It is made from uncoated steel with a tolerance of 0.00004 in and includes a Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-288812

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.6310 in and a tolerance of 0.00004 in. Made from uncoated steel, 2 in length. Used as a no-go limit gauge to verify that a hole diameter does not exceed the specified size; if the gauge enters the hole, the part is out of tolerance. Suitable for dimensional inspection in quality control for machining and manufacturing applications.

SKU: 3G-OTH-289974

Lihat Detail Penawaran + Layanan

Vermont Gage

VERMONT GAGE Class X No-Go (Minus) pin gauge with a diameter of 0.5373 in and a tolerance of 0.00004 in. Made from uncoated steel with a 2 in length. Used to verify that a hole does not exceed its maximum allowable diameter in precision inspection. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-289084

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.6150 inches, 2-inch length, and tolerance of 0.00004 inches. Made from uncoated steel. Used for go/no-go dimensional verification of hole diameters in machining and quality control applications.

SKU: 3G-OTH-289830

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.5838 in, used to verify that a hole or bore does not exceed the specified size. Made from uncoated steel with a tolerance of 0.00004 in. Includes a Certificate of Accuracy with NIST Traceability. Suitable for dimensional inspection in machining and quality control applications.

SKU: 3G-OTH-289533

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (minus) pin gauge with 0.6121 in diameter, 0.00004 in tolerance, and 2 in length. Made from uncoated steel. Used to verify that a hole does not exceed its maximum allowable size in machining and quality control applications.

SKU: 3G-OTH-288746

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage This Class X No-Go (Minus) pin gauge is used for dimensional inspection of holes and bores, verifying that a hole does not exceed the specified diameter. It has a diameter of 0.5176 in, a tolerance of 0.00004 in, and is 2 in long. Made from uncoated steel, it includes a Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-288908

Lihat Detail Penawaran + Layanan

Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.5549 in diameter, 2 in length, uncoated steel, and 0.00004 in tolerance. Used to verify that a machined hole does not exceed its maximum allowable size; if the gauge enters, the hole is oversize. Includes Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-289269

Lihat Detail Penawaran + Layanan