Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar

Vermont Gage 3G-OTH-268515 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 141298520

13 produk yang kompatibel ditemukan untuk Vermont Gage 3G-OTH-268515. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:141298520VERMONT GAGE

Kecocokan referensi silang untuk “141298520”

“141298520” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

VERMONT GAGE Class X No-Go (Minus) Pin Gauge - 0.9852 in Dia, 2 in Length, Uncoated Steel
VERMONT GAGE

VERMONT GAGE Class X No-Go (Minus) Pin Gauge - 0.9852 in Dia, 2 in Length, Uncoated Steel

SKU: 3G-OTH-268515
Available by RFQPenawaran + Layanan

Lebih banyak dari Vermont Gage

12 lainnya Vermont Gage produk dalam kisaran yang sama

Vermont Gage This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed its maximum allowable diameter. Made of uncoated steel, it has a diameter of 0.9448 inches, a tolerance of 0.00006 inches, and a length of 2 inches. It includes a Certificate of Accuracy with NIST Traceability.
Vermont Gage

Vermont Gage This Class X No-Go (Minus) pin gauge is used to verify that a hole does not exceed its maximum allowable diameter. Made of uncoated steel, it has a diameter of 0.9448 inches, a tolerance of 0.00006 inches, and a length of 2 inches. It includes a Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-268168
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.8382 in and a length of 2 in. Made from uncoated steel with a tolerance of 0.00006 in. Used for dimensional inspection to verify that a hole does not exceed the specified diameter, ensuring parts conform to tight tolerance requirements. Includes a Certificate of Accuracy with NIST Traceability.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.8382 in and a length of 2 in. Made from uncoated steel with a tolerance of 0.00006 in. Used for dimensional inspection to verify that a hole does not exceed the specified diameter, ensuring parts conform to tight tolerance requirements. Includes a Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-266396
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.8810 inches and a tolerance of ±0.00006 inches. Made from uncoated steel, this 2-inch long gauge is used for verifying that hole diameters do not exceed the specified size in precision manufacturing and quality control applications. Includes a Certificate of Accuracy with NIST Traceability.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.8810 inches and a tolerance of ±0.00006 inches. Made from uncoated steel, this 2-inch long gauge is used for verifying that hole diameters do not exceed the specified size in precision manufacturing and quality control applications. Includes a Certificate of Accuracy with NIST Traceability.

SKU: 3G-OTH-267609
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with diameter 0.9293 in, tolerance ±0.00006 in, and 2 in length. Made of uncoated steel. Used for verifying that hole diameters do not exceed the maximum allowable size in precision manufacturing and quality control applications.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with diameter 0.9293 in, tolerance ±0.00006 in, and 2 in length. Made of uncoated steel. Used for verifying that hole diameters do not exceed the maximum allowable size in precision manufacturing and quality control applications.

SKU: 3G-OTH-266356
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with 0.8712 in diameter, 2 in length, and ±0.00006 in tolerance. Made of uncoated steel. Used for no-go gaging to verify that hole diameters do not exceed the specified size in quality control and inspection of machined parts.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.8712 in diameter, 2 in length, and ±0.00006 in tolerance. Made of uncoated steel. Used for no-go gaging to verify that hole diameters do not exceed the specified size in quality control and inspection of machined parts.

SKU: 3G-OTH-268707
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (minus) pin gauge with 0.8946 in diameter, 2 in length, and 0.00006 in tolerance. Made from uncoated steel. Used to verify that a hole diameter does not exceed the specified size; the gauge should not enter the hole if the hole is within tolerance. Common in quality control and inspection of machined parts.
Vermont Gage

Vermont Gage Class X No-Go (minus) pin gauge with 0.8946 in diameter, 2 in length, and 0.00006 in tolerance. Made from uncoated steel. Used to verify that a hole diameter does not exceed the specified size; the gauge should not enter the hole if the hole is within tolerance. Common in quality control and inspection of machined parts.

SKU: 3G-OTH-267734
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.9991 in, 2 in length, and tolerance of 0.00006 in. Made from uncoated steel. Used for go/no-go dimensional verification of hole diameters, ensuring holes do not exceed maximum allowable size in machining and manufacturing applications.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.9991 in, 2 in length, and tolerance of 0.00006 in. Made from uncoated steel. Used for go/no-go dimensional verification of hole diameters, ensuring holes do not exceed maximum allowable size in machining and manufacturing applications.

SKU: 3G-OTH-268643
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.9721 inches, tolerance of 0.00006 inches, and 2-inch length. Made of uncoated steel. Used for precision inspection of hole diameters to verify that holes do not exceed the maximum allowable size in manufacturing and quality control applications.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with a diameter of 0.9721 inches, tolerance of 0.00006 inches, and 2-inch length. Made of uncoated steel. Used for precision inspection of hole diameters to verify that holes do not exceed the maximum allowable size in manufacturing and quality control applications.

SKU: 3G-OTH-268403
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (Minus) pin gauge with 0.7821 in diameter and 0.00004 in tolerance. Made of uncoated steel, 2 in length. Used to verify that a hole does not exceed its maximum allowable size in quality control and manufacturing inspection.
Vermont Gage

Vermont Gage Class X No-Go (Minus) pin gauge with 0.7821 in diameter and 0.00004 in tolerance. Made of uncoated steel, 2 in length. Used to verify that a hole does not exceed its maximum allowable size in quality control and manufacturing inspection.

SKU: 3G-OTH-266635
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (minus) pin gauge with diameter 0.7751 inches, tolerance ±0.00004 inches, and 2-inch length. Made of uncoated steel. Used to verify that a machined hole does not exceed its specified upper size limit; the gauge should not enter the hole if the hole is within tolerance.
Vermont Gage

Vermont Gage Class X No-Go (minus) pin gauge with diameter 0.7751 inches, tolerance ±0.00004 inches, and 2-inch length. Made of uncoated steel. Used to verify that a machined hole does not exceed its specified upper size limit; the gauge should not enter the hole if the hole is within tolerance.

SKU: 3G-OTH-266582
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go (minus) pin gauge with 0.7812 in diameter, 2 in length, made of uncoated steel. Tolerance of 0.00004 in. Used to verify that a hole does not exceed the specified diameter in precision machining and quality control applications.
Vermont Gage

Vermont Gage Class X No-Go (minus) pin gauge with 0.7812 in diameter, 2 in length, made of uncoated steel. Tolerance of 0.00004 in. Used to verify that a hole does not exceed the specified diameter in precision machining and quality control applications.

SKU: 3G-OTH-268656
Available by RFQPenawaran + Layanan
Vermont Gage Class X No-Go pin gauge for dimensional verification of holes and bores. Diameter 0.8317 in, tolerance ±0.00006 in, 2 in length, uncoated steel. Used in manufacturing and quality control to check that hole diameters do not exceed upper tolerance limits.
Vermont Gage

Vermont Gage Class X No-Go pin gauge for dimensional verification of holes and bores. Diameter 0.8317 in, tolerance ±0.00006 in, 2 in length, uncoated steel. Used in manufacturing and quality control to check that hole diameters do not exceed upper tolerance limits.

SKU: 3G-OTH-267096
Available by RFQPenawaran + Layanan