Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar

Ken Forging 3G-OTH-139819 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 14E-316SS

13 produk yang kompatibel ditemukan untuk Ken Forging 3G-OTH-139819. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:14E-316SSKEN FORGING

Kecocokan referensi silang untuk “14E-316SS”

“14E-316SS” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

Lebih banyak dari Ken Forging

12 lainnya Ken Forging produk dalam kisaran yang sama

Ken Forging This stainless steel fixed rod end blank is of the Plain type, with a 1/4 in shank diameter and a 1 1/2 in hole center-to-end length. It is supplied as a blank for custom machining and assembly in mechanical linkages, actuators, and power transmission systems where a fixed, non-adjustable connection is required.
Ken Forging

Ken Forging This stainless steel fixed rod end blank is of the Plain type, with a 1/4 in shank diameter and a 1 1/2 in hole center-to-end length. It is supplied as a blank for custom machining and assembly in mechanical linkages, actuators, and power transmission systems where a fixed, non-adjustable connection is required.

SKU: 3G-OTH-139781
Available by RFQPenawaran + Layanan
Ken Forging This stainless steel fixed rod end blank is of plain type with a 5/8 in shank diameter and a 12 in hole center-to-end length. It is designed for custom machining to create finished rod ends for industrial linkages, mechanical assemblies, and power transmission systems.
Ken Forging

Ken Forging This stainless steel fixed rod end blank is of plain type with a 5/8 in shank diameter and a 12 in hole center-to-end length. It is designed for custom machining to create finished rod ends for industrial linkages, mechanical assemblies, and power transmission systems.

SKU: 3G-OTH-139804
Available by RFQPenawaran + Layanan
Ken Forging Stainless steel fixed rod end blank with plain type, 1/2 in shank diameter, and 12 in hole center-to-end length. Used in mechanical linkages, actuators, and assemblies requiring a non-adjustable connection. Suitable for power transmission and automation systems.
Ken Forging

Ken Forging Stainless steel fixed rod end blank with plain type, 1/2 in shank diameter, and 12 in hole center-to-end length. Used in mechanical linkages, actuators, and assemblies requiring a non-adjustable connection. Suitable for power transmission and automation systems.

SKU: 3G-OTH-139803
Available by RFQPenawaran + Layanan
Ken Forging This stainless steel fixed rod end blank is of plain type, featuring a 1 1/4 in shank diameter and a 12 in hole center-to-end length. It is used in mechanical linkages, actuation systems, and industrial machinery where a non-adjustable connection is required, such as in material handling and power transmission applications.
Ken Forging

Ken Forging This stainless steel fixed rod end blank is of plain type, featuring a 1 1/4 in shank diameter and a 12 in hole center-to-end length. It is used in mechanical linkages, actuation systems, and industrial machinery where a non-adjustable connection is required, such as in material handling and power transmission applications.

SKU: 3G-OTH-139816
Available by RFQPenawaran + Layanan
Ken Forging Stainless steel fixed rod end blank with plain type, 1 in shank diameter, and 6 in hole center-to-end length. Designed for custom machining to accept bearings or bushings, used in industrial linkages and actuation systems for material handling, power transmission, and heavy machinery.
Ken Forging

Ken Forging Stainless steel fixed rod end blank with plain type, 1 in shank diameter, and 6 in hole center-to-end length. Designed for custom machining to accept bearings or bushings, used in industrial linkages and actuation systems for material handling, power transmission, and heavy machinery.

SKU: 3G-OTH-139801
Available by RFQPenawaran + Layanan
Ken Forging Stainless steel fixed rod end blank with plain type. Shank diameter 7/8 in, hole center-to-end length 6 in. Used in mechanical linkages, actuators, and assemblies requiring a plain rod end for custom machining or finishing.
Ken Forging

Ken Forging Stainless steel fixed rod end blank with plain type. Shank diameter 7/8 in, hole center-to-end length 6 in. Used in mechanical linkages, actuators, and assemblies requiring a plain rod end for custom machining or finishing.

SKU: 3G-OTH-139799
Available by RFQPenawaran + Layanan
Ken Forging This stainless steel fixed rod end blank is of plain type with a 1-inch shank diameter and a 12-inch hole center-to-end length. It is designed for custom machining to accept bearings or bushings, suitable for use in industrial linkages and actuation systems.
Ken Forging

Ken Forging This stainless steel fixed rod end blank is of plain type with a 1-inch shank diameter and a 12-inch hole center-to-end length. It is designed for custom machining to accept bearings or bushings, suitable for use in industrial linkages and actuation systems.

SKU: 3G-OTH-139809
Available by RFQPenawaran + Layanan
Ken Forging This stainless steel fixed rod end blank is of plain type with a 3/8 in shank diameter and a 12 in hole center-to-end length. It is intended for custom machining to create finished rod ends for use in mechanical linkages and assemblies within power transmission and automation systems.
Ken Forging

Ken Forging This stainless steel fixed rod end blank is of plain type with a 3/8 in shank diameter and a 12 in hole center-to-end length. It is intended for custom machining to create finished rod ends for use in mechanical linkages and assemblies within power transmission and automation systems.

SKU: 3G-OTH-139818
Available by RFQPenawaran + Layanan
Ken Forging This stainless steel fixed rod end blank is of the Plain type, with a 1-1/2 in shank diameter and a 6 in hole center-to-end length. It is supplied as a blank for custom machining and assembly in industrial linkages, actuation systems, and mechanical assemblies.
Ken Forging

Ken Forging This stainless steel fixed rod end blank is of the Plain type, with a 1-1/2 in shank diameter and a 6 in hole center-to-end length. It is supplied as a blank for custom machining and assembly in industrial linkages, actuation systems, and mechanical assemblies.

SKU: 3G-OTH-139821
Available by RFQPenawaran + Layanan
Ken Forging This stainless steel fixed rod end blank is of the Plain type, with a 3/8 in shank diameter and a 3 1/2 in hole center-to-end length. It is designed for custom machining to accept bearings or bushings, suitable for use in mechanical linkages and motion-control systems in industrial machinery, automation, and material handling.
Ken Forging

Ken Forging This stainless steel fixed rod end blank is of the Plain type, with a 3/8 in shank diameter and a 3 1/2 in hole center-to-end length. It is designed for custom machining to accept bearings or bushings, suitable for use in mechanical linkages and motion-control systems in industrial machinery, automation, and material handling.

SKU: 3G-OTH-139785
Available by RFQPenawaran + Layanan
Ken Forging Stainless steel fixed rod end blank with plain type. Shank diameter 3/4 in, hole center-to-end length 12 in. Used in industrial linkage assemblies, machinery, and structural connections requiring a non-adjustable rod end.
Ken Forging

Ken Forging Stainless steel fixed rod end blank with plain type. Shank diameter 3/4 in, hole center-to-end length 12 in. Used in industrial linkage assemblies, machinery, and structural connections requiring a non-adjustable rod end.

SKU: 3G-OTH-139806
Available by RFQPenawaran + Layanan
Ken Forging This plain stainless steel rod end blank features a 3/8 in shank diameter and a 6 in hole center-to-end length. It is designed for custom machining in industrial linkage assemblies, such as those found in agricultural equipment, construction machinery, and material handling systems, where corrosion resistance is required.
Ken Forging

Ken Forging This plain stainless steel rod end blank features a 3/8 in shank diameter and a 6 in hole center-to-end length. It is designed for custom machining in industrial linkage assemblies, such as those found in agricultural equipment, construction machinery, and material handling systems, where corrosion resistance is required.

SKU: 3G-OTH-139792
Available by RFQPenawaran + Layanan