Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar

Yg-1 3G-OTH-232480 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 18227HN

13 produk yang kompatibel ditemukan untuk Yg-1 3G-OTH-232480. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:18227HNYG-1

Kecocokan referensi silang untuk “18227HN”

“18227HN” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

YG-1 2" High-Speed Steel Square End Mill for Aluminum, TiN Coated, 2 Flute, 4" LOC, 6-1/2" OAL
YG-1

YG-1 2" High-Speed Steel Square End Mill for Aluminum, TiN Coated, 2 Flute, 4" LOC, 6-1/2" OAL

SKU: 3G-OTH-232480
Available by RFQPenawaran + Layanan

Lebih banyak dari Yg-1

12 lainnya Yg-1 produk dalam kisaran yang sama

Yg-1 This high-speed steel square end mill features a titanium nitride (TiN) coating for enhanced wear resistance. With a 3/4" cutting diameter and 2 flutes, it is designed for efficient chip evacuation in slotting, profiling, and contouring operations on aluminum and non-ferrous materials.
Yg-1

Yg-1 This high-speed steel square end mill features a titanium nitride (TiN) coating for enhanced wear resistance. With a 3/4" cutting diameter and 2 flutes, it is designed for efficient chip evacuation in slotting, profiling, and contouring operations on aluminum and non-ferrous materials.

SKU: 3G-OTH-232501
Available by RFQPenawaran + Layanan
Yg-1 High-speed steel square end mill with TiN coating and 2-flute design. Mill diameter 3/8", length of cut 3/4", overall length 2-1/2". Suitable for slotting, profiling, and contouring aluminum and non-ferrous materials in general machining operations.
Yg-1

Yg-1 High-speed steel square end mill with TiN coating and 2-flute design. Mill diameter 3/8", length of cut 3/4", overall length 2-1/2". Suitable for slotting, profiling, and contouring aluminum and non-ferrous materials in general machining operations.

SKU: 3G-OTH-232477
Available by RFQPenawaran + Layanan
Yg-1 High-speed steel square end mill with TiCN coating, designed for machining aluminum and non-ferrous materials. The 2-flute geometry provides efficient chip evacuation for slotting, profiling, and contouring operations. Mill diameter: 7/16", length of cut: 1-3/4", overall length: 3-3/4".
Yg-1

Yg-1 High-speed steel square end mill with TiCN coating, designed for machining aluminum and non-ferrous materials. The 2-flute geometry provides efficient chip evacuation for slotting, profiling, and contouring operations. Mill diameter: 7/16", length of cut: 1-3/4", overall length: 3-3/4".

SKU: 3G-OTH-232473
Available by RFQPenawaran + Layanan
Yg-1 This high-speed steel square end mill features a TiCN coating and a 2-flute design for efficient chip evacuation in aluminum and non-ferrous materials. With a 3/8" mill diameter, 1-1/2" length of cut, and 3-1/4" overall length, it is suited for slotting, profiling, and contouring operations in general metalworking and mold-making applications.
Yg-1

Yg-1 This high-speed steel square end mill features a TiCN coating and a 2-flute design for efficient chip evacuation in aluminum and non-ferrous materials. With a 3/8" mill diameter, 1-1/2" length of cut, and 3-1/4" overall length, it is suited for slotting, profiling, and contouring operations in general metalworking and mold-making applications.

SKU: 3G-OTH-232498
Available by RFQPenawaran + Layanan
Yg-1 This high-speed steel square end mill is designed for machining aluminum and non-ferrous materials. The TiCN coating reduces wear and extends tool life. With a 1/2" diameter, 2" length of cut, and 2-flute geometry, it provides efficient chip evacuation in slotting, profiling, and contouring applications.
Yg-1

Yg-1 This high-speed steel square end mill is designed for machining aluminum and non-ferrous materials. The TiCN coating reduces wear and extends tool life. With a 1/2" diameter, 2" length of cut, and 2-flute geometry, it provides efficient chip evacuation in slotting, profiling, and contouring applications.

SKU: 3G-OTH-232500
Available by RFQPenawaran + Layanan
Yg-1 High-speed steel square end mill with TiCN coating for aluminum and non-ferrous materials. Two-flute geometry enables efficient chip evacuation. Suitable for slotting, profiling, and contouring in industrial machining. Mill diameter: 7/16"; length of cut: 1"; overall length: 2-11/16".
Yg-1

Yg-1 High-speed steel square end mill with TiCN coating for aluminum and non-ferrous materials. Two-flute geometry enables efficient chip evacuation. Suitable for slotting, profiling, and contouring in industrial machining. Mill diameter: 7/16"; length of cut: 1"; overall length: 2-11/16".

SKU: 3G-OTH-232528
Available by RFQPenawaran + Layanan
Yg-1 This high-speed steel square end mill is designed for machining aluminum and non-ferrous materials. The TiCN coating enhances wear resistance, while the 2-flute geometry provides efficient chip evacuation for slotting, profiling, and contouring operations.
Yg-1

Yg-1 This high-speed steel square end mill is designed for machining aluminum and non-ferrous materials. The TiCN coating enhances wear resistance, while the 2-flute geometry provides efficient chip evacuation for slotting, profiling, and contouring operations.

SKU: 3G-OTH-232516
Available by RFQPenawaran + Layanan
Yg-1 This high-speed steel square end mill features a TiN coating and a 2-flute design for efficient chip evacuation in aluminum and non-ferrous materials. With a 7/8" mill diameter, 1-7/8" length of cut, and 4-1/8" overall length, it is suited for slotting, profiling, and contouring operations in general metalworking and mold-making applications.
Yg-1

Yg-1 This high-speed steel square end mill features a TiN coating and a 2-flute design for efficient chip evacuation in aluminum and non-ferrous materials. With a 7/8" mill diameter, 1-7/8" length of cut, and 4-1/8" overall length, it is suited for slotting, profiling, and contouring operations in general metalworking and mold-making applications.

SKU: 3G-OTH-232491
Available by RFQPenawaran + Layanan
Yg-1 High-speed steel square end mill with TiN coating for reduced friction and improved tool life. Two-flute design provides effective chip evacuation in slotting, profiling, and general milling of aluminum and non-ferrous materials. Mill diameter 1", length of cut 3", overall length 5-1/2".
Yg-1

Yg-1 High-speed steel square end mill with TiN coating for reduced friction and improved tool life. Two-flute design provides effective chip evacuation in slotting, profiling, and general milling of aluminum and non-ferrous materials. Mill diameter 1", length of cut 3", overall length 5-1/2".

SKU: 3G-OTH-232530
Available by RFQPenawaran + Layanan
Yg-1 High-speed steel square end mill with TiN coating for aluminum and non-ferrous materials. Two-flute design with 1" diameter, 4" length of cut, and 6-1/2" overall length. Suitable for slotting, profiling, and contouring in general machining applications.
Yg-1

Yg-1 High-speed steel square end mill with TiN coating for aluminum and non-ferrous materials. Two-flute design with 1" diameter, 4" length of cut, and 6-1/2" overall length. Suitable for slotting, profiling, and contouring in general machining applications.

SKU: 3G-OTH-232489
Available by RFQPenawaran + Layanan
Yg-1 This high-speed steel square end mill is designed for machining aluminum and non-ferrous materials. The TiCN coating reduces wear and extends tool life. Two-flute geometry provides efficient chip evacuation for slotting, profiling, and contouring operations. Mill diameter: 3/8"; length of cut: 3/4"; overall length: 2-1/2".
Yg-1

Yg-1 This high-speed steel square end mill is designed for machining aluminum and non-ferrous materials. The TiCN coating reduces wear and extends tool life. Two-flute geometry provides efficient chip evacuation for slotting, profiling, and contouring operations. Mill diameter: 3/8"; length of cut: 3/4"; overall length: 2-1/2".

SKU: 3G-OTH-232472
Available by RFQPenawaran + Layanan
Yg-1 High-speed steel square end mill with two flutes, designed for machining aluminum and non-ferrous materials. The 2-flute geometry aids chip evacuation in slotting, profiling, and roughing operations. Mill diameter 3/4", length of cut 1-5/8", overall length 3-7/8".
Yg-1

Yg-1 High-speed steel square end mill with two flutes, designed for machining aluminum and non-ferrous materials. The 2-flute geometry aids chip evacuation in slotting, profiling, and roughing operations. Mill diameter 3/4", length of cut 1-5/8", overall length 3-7/8".

SKU: 3G-OTH-232526
Available by RFQPenawaran + Layanan