Osg 3G-OTH-279152 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 20431700

13 produk yang kompatibel ditemukan untuk Osg 3G-OTH-279152. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:20431700OSG

Kecocokan referensi silang untuk “20431700”

“20431700” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

OSG

OSG 20431700 Reduced-Neck Carbide Square End Mill for Aluminum, 1" Mill Dia, 1" LOC, 5" OAL, 3 Flute

SKU: 3G-OTH-279152

Lihat Detail Penawaran + Layanan

Lebih banyak dari Osg

12 lainnya Osg produk dalam kisaran yang sama

Osg

Osg This OSG square end mill is made of carbide with a reduced-neck design, featuring 2 flutes and a 1/2" cutting diameter. It has a 1/2" length of cut and 3" overall length, suitable for high-speed milling of aluminum and non-ferrous materials. The geometry promotes efficient chip evacuation and fine surface finishes in general machining applications.

SKU: 3G-OTH-279192

Lihat Detail Penawaran + Layanan

Osg

Osg This OSG square end mill is made from carbide for wear resistance in aluminum and non-ferrous machining. It features a 1/4" cutting diameter, 1/4" length of cut, 2-1/2" overall length, and 3-flute geometry. The reduced-neck design enables deep cavity milling with efficient chip evacuation and fine surface finishes.

SKU: 3G-OTH-279222

Lihat Detail Penawaran + Layanan

Osg

Osg This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 3-flute geometry and 5/8" diameter enable efficient chip evacuation and fine surface finishes in milling applications. The reduced-neck design facilitates deep cavity work, making it suitable for general manufacturing and automotive or aerospace component production.

SKU: 3G-OTH-279114

Lihat Detail Penawaran + Layanan

Osg

Osg This OSG square end mill is made from carbide with a reduced-neck design for deep reach. It has a 3/4" cutting diameter, 3/4" length of cut, and 6" overall length with 3 flutes. Suitable for high-speed machining of aluminum and non-ferrous materials in production milling applications.

SKU: 3G-OTH-279120

Lihat Detail Penawaran + Layanan

Osg

Osg This OSG carbide square end mill features a reduced-neck design for deep cavity machining. With a 1/4" cutting diameter, 1/4" length of cut, and 4" overall length, it is suited for high-speed milling of aluminum and non-ferrous materials. The 3-flute geometry promotes efficient chip evacuation and fine surface finishes in CNC applications.

SKU: 3G-OTH-279169

Lihat Detail Penawaran + Layanan

Osg

Osg This carbide square end mill features a DLC coating to reduce friction and built-up edge during high-speed machining of aluminum and non-ferrous materials. The reduced-neck design enables deep cavity milling. With 3 flutes and a 5/8" mill diameter, 1" length of cut, and 4" overall length, it is suited for finishing and roughing operations in general manufacturing.

SKU: 3G-OTH-279115

Lihat Detail Penawaran + Layanan

Osg

Osg Carbide square end mill with reduced-neck design for deep slotting and high-speed machining of aluminum and non-ferrous materials. Three-flute geometry promotes efficient chip evacuation. Suitable for general milling applications in fabrication and production environments.

SKU: 3G-OTH-279190

Lihat Detail Penawaran + Layanan

Osg

Osg This OSG square end mill is made of carbide with a reduced-neck design for deep pocketing. It has 2 flutes, a 1/4" cutting diameter, 1/4" length of cut, and 2-1/2" overall length. Optimized for high-speed machining of aluminum and non-ferrous materials, it is used for slotting, profiling, and contouring applications.

SKU: 3G-OTH-279171

Lihat Detail Penawaran + Layanan

Osg

Osg This reduced-neck carbide square end mill is designed for machining aluminum and non-ferrous materials. It features a DLC coating, 3 flutes, 3/4" mill diameter, 1-1/8" length of cut, and 4" overall length. The reduced-neck design allows for deep pocketing and improved chip evacuation in milling applications.

SKU: 3G-OTH-279223

Lihat Detail Penawaran + Layanan

Osg

Osg This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 2-flute geometry and 3/4" diameter enable efficient chip evacuation and smooth finishes in slotting, profiling, and contouring applications. The reduced-neck design allows for deep cavity machining.

SKU: 3G-OTH-279153

Lihat Detail Penawaran + Layanan

Osg

Osg This OSG square end mill is made of carbide with a DLC coating and features a reduced-neck design. It has a 3/4" mill diameter, 1.142" length of cut, 4" overall length, and 3 flutes. Suitable for high-speed machining of aluminum and non-ferrous materials in slotting, profiling, and finishing operations.

SKU: 3G-OTH-279167

Lihat Detail Penawaran + Layanan

Osg

Osg This reduced-neck carbide square end mill is designed for machining aluminum and non-ferrous materials. The DLC coating reduces friction and built-up edge. With 3 flutes, a 3/8" mill diameter, 7/8" length of cut, and 3" overall length, it is suitable for finishing and roughing operations.

SKU: 3G-OTH-279133

Lihat Detail Penawaran + Layanan