Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

Widia Hanita 3G-OTH-203099 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 2A09M05002RAT UNCOATED

13 produk yang kompatibel ditemukan untuk Widia Hanita 3G-OTH-203099. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:2A09M05002RAT UNCOATEDWIDIA HANITA

Kecocokan referensi silang untuk “2A09M05002RAT UNCOATED”

“2A09M05002RAT UNCOATED” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

WIDIA HANITA 2A09M05002RAT UNCOATED Fast-Cutting Carbide Corner-Radius End Mill for Aluminum, 5 mm Dia, 14 mm LOC, 0.2 mm Rad, 2 Flute

WIDIA HANITA 2A09M05002RAT UNCOATED Fast-Cutting Carbide Corner-Radius End Mill for Aluminum, 5 mm Dia, 14 mm LOC, 0.2 mm Rad, 2 Flute

SKU: 3G-OTH-203099

Lihat Detail Penawaran + Layanan

Lebih banyak dari Widia Hanita

12 lainnya Widia Hanita produk dalam kisaran yang sama

Widia Hanita This uncoated carbide end mill features two flutes and a 0.015" corner radius for fast cutting in aluminum and non-ferrous materials. With a 1/8" mill diameter, 1/4" length of cut, and 2" overall length, it is suited for high-speed machining operations where edge strength and surface finish are required.

Widia Hanita This uncoated carbide end mill features two flutes and a 0.015" corner radius for fast cutting in aluminum and non-ferrous materials. With a 1/8" mill diameter, 1/4" length of cut, and 2" overall length, it is suited for high-speed machining operations where edge strength and surface finish are required.

SKU: 3G-OTH-203088

Lihat Detail Penawaran + Layanan

WIDIA HANITA Corner Radius End Mill: Carbide, 2 Flute, 3 mm Mill Dia, 12 mm LOC, 0.2 mm Rad (MPN 2A09M03000RAT UNCOATED)

WIDIA HANITA Corner Radius End Mill: Carbide, 2 Flute, 3 mm Mill Dia, 12 mm LOC, 0.2 mm Rad (MPN 2A09M03000RAT UNCOATED)

SKU: 3G-OTH-203086

Lihat Detail Penawaran + Layanan

Widia Hanita Uncoated carbide end mill with 2 mm diameter, 8 mm length of cut, 0.2 mm corner radius, and 2 flutes. Designed for fast cutting of aluminum and non-ferrous materials. The corner radius strengthens the cutting edge to reduce chipping during high-speed machining of slots, profiles, and contours.

Widia Hanita Uncoated carbide end mill with 2 mm diameter, 8 mm length of cut, 0.2 mm corner radius, and 2 flutes. Designed for fast cutting of aluminum and non-ferrous materials. The corner radius strengthens the cutting edge to reduce chipping during high-speed machining of slots, profiles, and contours.

SKU: 3G-OTH-203087

Lihat Detail Penawaran + Layanan

Widia Hanita This uncoated carbide end mill features a 16 mm diameter, 32 mm length of cut, 2 flutes, and a 1 mm corner radius. The corner radius strengthens the cutting edge to reduce chipping during high-speed machining of aluminum and non-ferrous materials. Suitable for applications in general fabrication and metalworking.

Widia Hanita This uncoated carbide end mill features a 16 mm diameter, 32 mm length of cut, 2 flutes, and a 1 mm corner radius. The corner radius strengthens the cutting edge to reduce chipping during high-speed machining of aluminum and non-ferrous materials. Suitable for applications in general fabrication and metalworking.

SKU: 3G-OTH-203084

Lihat Detail Penawaran + Layanan

Widia Hanita Uncoated carbide end mill with 2 flutes, 5/16" diameter, 5/8" length of cut, and 0.015" corner radius. Designed for high-speed machining of aluminum and non-ferrous materials. The corner radius strengthens the cutting edge, while the 2-flute geometry enables efficient chip evacuation in slotting and profiling operations.

Widia Hanita Uncoated carbide end mill with 2 flutes, 5/16" diameter, 5/8" length of cut, and 0.015" corner radius. Designed for high-speed machining of aluminum and non-ferrous materials. The corner radius strengthens the cutting edge, while the 2-flute geometry enables efficient chip evacuation in slotting and profiling operations.

SKU: 3G-OTH-203093

Lihat Detail Penawaran + Layanan

Widia Hanita This uncoated carbide corner-radius end mill is designed for fast cutting of aluminum and non-ferrous materials. With a 3 mm mill diameter, 12 mm length of cut, 0.2 mm corner radius, and 3 flutes, it is suitable for high-speed machining applications in general fabrication.

Widia Hanita This uncoated carbide corner-radius end mill is designed for fast cutting of aluminum and non-ferrous materials. With a 3 mm mill diameter, 12 mm length of cut, 0.2 mm corner radius, and 3 flutes, it is suitable for high-speed machining applications in general fabrication.

SKU: 3G-OTH-203089

Lihat Detail Penawaran + Layanan

Widia Hanita This uncoated carbide end mill features a 10 mm diameter, 22 mm length of cut, 1 mm corner radius, and 2 flutes. The corner radius strengthens the cutting edge to reduce chipping, while the 2-flute geometry provides efficient chip evacuation. Designed for high-speed machining of aluminum and non-ferrous materials in slotting and profiling applications.

Widia Hanita This uncoated carbide end mill features a 10 mm diameter, 22 mm length of cut, 1 mm corner radius, and 2 flutes. The corner radius strengthens the cutting edge to reduce chipping, while the 2-flute geometry provides efficient chip evacuation. Designed for high-speed machining of aluminum and non-ferrous materials in slotting and profiling applications.

SKU: 3G-OTH-203090

Lihat Detail Penawaran + Layanan

Widia Hanita This uncoated carbide end mill features a 20 mm diameter, 40 mm length of cut, and 1 mm corner radius with 2 flutes. The corner radius strengthens the cutting edge to reduce chipping and improve surface finish. It is designed for high-speed machining of aluminum and non-ferrous materials in profiling, slotting, and contouring applications.

Widia Hanita This uncoated carbide end mill features a 20 mm diameter, 40 mm length of cut, and 1 mm corner radius with 2 flutes. The corner radius strengthens the cutting edge to reduce chipping and improve surface finish. It is designed for high-speed machining of aluminum and non-ferrous materials in profiling, slotting, and contouring applications.

SKU: 3G-OTH-203085

Lihat Detail Penawaran + Layanan

Widia Hanita This uncoated carbide end mill features two flutes and a 0.2 mm corner radius, designed for fast cutting of aluminum and non-ferrous materials. With a 4 mm mill diameter and 12 mm length of cut, it is suited for high-speed machining operations where edge strength and reduced chipping are required.

Widia Hanita This uncoated carbide end mill features two flutes and a 0.2 mm corner radius, designed for fast cutting of aluminum and non-ferrous materials. With a 4 mm mill diameter and 12 mm length of cut, it is suited for high-speed machining operations where edge strength and reduced chipping are required.

SKU: 3G-OTH-203083

Lihat Detail Penawaran + Layanan

Widia Hanita This uncoated carbide corner-radius end mill is designed for fast cutting of aluminum and non-ferrous materials. With a 4 mm diameter, 12 mm length of cut, 0.5 mm corner radius, and 3 flutes, it provides efficient chip evacuation and edge strength for finishing and semi-finishing operations in milling applications.

Widia Hanita This uncoated carbide corner-radius end mill is designed for fast cutting of aluminum and non-ferrous materials. With a 4 mm diameter, 12 mm length of cut, 0.5 mm corner radius, and 3 flutes, it provides efficient chip evacuation and edge strength for finishing and semi-finishing operations in milling applications.

SKU: 3G-OTH-203098

Lihat Detail Penawaran + Layanan

Widia Hanita This uncoated carbide end mill features a 2.5 mm diameter, 9 mm length of cut, 0.2 mm corner radius, and 2 flutes. Designed for fast cutting of aluminum and non-ferrous materials, the corner radius reduces edge chipping and improves surface finish. Suitable for CNC milling applications requiring high material removal rates.

Widia Hanita This uncoated carbide end mill features a 2.5 mm diameter, 9 mm length of cut, 0.2 mm corner radius, and 2 flutes. Designed for fast cutting of aluminum and non-ferrous materials, the corner radius reduces edge chipping and improves surface finish. Suitable for CNC milling applications requiring high material removal rates.

SKU: 3G-OTH-203082

Lihat Detail Penawaran + Layanan

Widia Hanita This uncoated carbide end mill features a 12 mm diameter, 25 mm length of cut, and 1 mm corner radius with 2 flutes. Designed for high-speed machining of aluminum and non-ferrous materials, its geometry reduces chipping and improves surface finish in slotting, profiling, and contouring operations.

Widia Hanita This uncoated carbide end mill features a 12 mm diameter, 25 mm length of cut, and 1 mm corner radius with 2 flutes. Designed for high-speed machining of aluminum and non-ferrous materials, its geometry reduces chipping and improves surface finish in slotting, profiling, and contouring operations.

SKU: 3G-OTH-203097

Lihat Detail Penawaran + Layanan