Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar

Widia Hanita 3G-OTH-203085 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 2A09M20009RJT UNCOATED

13 produk yang kompatibel ditemukan untuk Widia Hanita 3G-OTH-203085. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:2A09M20009RJT UNCOATEDWIDIA HANITA

Kecocokan referensi silang untuk “2A09M20009RJT UNCOATED”

“2A09M20009RJT UNCOATED” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

WIDIA HANITA 2A09M20009RJT UNCOATED Fast-Cutting Carbide Corner-Radius End Mill for Aluminum, 20 mm Dia, 40 mm LOC, 1 mm Rad, 2 Flute
WIDIA HANITA

WIDIA HANITA 2A09M20009RJT UNCOATED Fast-Cutting Carbide Corner-Radius End Mill for Aluminum, 20 mm Dia, 40 mm LOC, 1 mm Rad, 2 Flute

SKU: 3G-OTH-203085
Available by RFQPenawaran + Layanan

Lebih banyak dari Widia Hanita

12 lainnya Widia Hanita produk dalam kisaran yang sama

Widia Hanita This uncoated carbide end mill features two flutes and a 0.015" corner radius for fast cutting in aluminum and non-ferrous materials. With a 1/8" mill diameter, 1/4" length of cut, and 2" overall length, it is suited for high-speed machining operations where edge strength and surface finish are required.
Widia Hanita

Widia Hanita This uncoated carbide end mill features two flutes and a 0.015" corner radius for fast cutting in aluminum and non-ferrous materials. With a 1/8" mill diameter, 1/4" length of cut, and 2" overall length, it is suited for high-speed machining operations where edge strength and surface finish are required.

SKU: 3G-OTH-203088
Available by RFQPenawaran + Layanan
WIDIA HANITA Corner Radius End Mill: Carbide, 2 Flute, 3 mm Mill Dia, 12 mm LOC, 0.2 mm Rad (MPN 2A09M03000RAT UNCOATED)
Widia Hanita

WIDIA HANITA Corner Radius End Mill: Carbide, 2 Flute, 3 mm Mill Dia, 12 mm LOC, 0.2 mm Rad (MPN 2A09M03000RAT UNCOATED)

SKU: 3G-OTH-203086
Available by RFQPenawaran + Layanan
Widia Hanita Uncoated carbide end mill with 2 mm diameter, 8 mm length of cut, 0.2 mm corner radius, and 2 flutes. Designed for fast cutting of aluminum and non-ferrous materials. The corner radius strengthens the cutting edge to reduce chipping during high-speed machining of slots, profiles, and contours.
Widia Hanita

Widia Hanita Uncoated carbide end mill with 2 mm diameter, 8 mm length of cut, 0.2 mm corner radius, and 2 flutes. Designed for fast cutting of aluminum and non-ferrous materials. The corner radius strengthens the cutting edge to reduce chipping during high-speed machining of slots, profiles, and contours.

SKU: 3G-OTH-203087
Available by RFQPenawaran + Layanan
Widia Hanita This uncoated carbide end mill features a 16 mm diameter, 32 mm length of cut, 2 flutes, and a 1 mm corner radius. The corner radius strengthens the cutting edge to reduce chipping during high-speed machining of aluminum and non-ferrous materials. Suitable for applications in general fabrication and metalworking.
Widia Hanita

Widia Hanita This uncoated carbide end mill features a 16 mm diameter, 32 mm length of cut, 2 flutes, and a 1 mm corner radius. The corner radius strengthens the cutting edge to reduce chipping during high-speed machining of aluminum and non-ferrous materials. Suitable for applications in general fabrication and metalworking.

SKU: 3G-OTH-203084
Available by RFQPenawaran + Layanan
Widia Hanita Uncoated carbide end mill with 2 flutes, 5/16" diameter, 5/8" length of cut, and 0.015" corner radius. Designed for high-speed machining of aluminum and non-ferrous materials. The corner radius strengthens the cutting edge, while the 2-flute geometry enables efficient chip evacuation in slotting and profiling operations.
Widia Hanita

Widia Hanita Uncoated carbide end mill with 2 flutes, 5/16" diameter, 5/8" length of cut, and 0.015" corner radius. Designed for high-speed machining of aluminum and non-ferrous materials. The corner radius strengthens the cutting edge, while the 2-flute geometry enables efficient chip evacuation in slotting and profiling operations.

SKU: 3G-OTH-203093
Available by RFQPenawaran + Layanan
Widia Hanita This uncoated carbide corner-radius end mill is designed for fast cutting of aluminum and non-ferrous materials. With a 3 mm mill diameter, 12 mm length of cut, 0.2 mm corner radius, and 3 flutes, it is suitable for high-speed machining applications in general fabrication.
Widia Hanita

Widia Hanita This uncoated carbide corner-radius end mill is designed for fast cutting of aluminum and non-ferrous materials. With a 3 mm mill diameter, 12 mm length of cut, 0.2 mm corner radius, and 3 flutes, it is suitable for high-speed machining applications in general fabrication.

SKU: 3G-OTH-203089
Available by RFQPenawaran + Layanan
Widia Hanita This uncoated carbide end mill features a 10 mm diameter, 22 mm length of cut, 1 mm corner radius, and 2 flutes. The corner radius strengthens the cutting edge to reduce chipping, while the 2-flute geometry provides efficient chip evacuation. Designed for high-speed machining of aluminum and non-ferrous materials in slotting and profiling applications.
Widia Hanita

Widia Hanita This uncoated carbide end mill features a 10 mm diameter, 22 mm length of cut, 1 mm corner radius, and 2 flutes. The corner radius strengthens the cutting edge to reduce chipping, while the 2-flute geometry provides efficient chip evacuation. Designed for high-speed machining of aluminum and non-ferrous materials in slotting and profiling applications.

SKU: 3G-OTH-203090
Available by RFQPenawaran + Layanan
Widia Hanita This uncoated carbide end mill features two flutes and a 0.2 mm corner radius, designed for fast cutting of aluminum and non-ferrous materials. With a 4 mm mill diameter and 12 mm length of cut, it is suited for high-speed machining operations where edge strength and reduced chipping are required.
Widia Hanita

Widia Hanita This uncoated carbide end mill features two flutes and a 0.2 mm corner radius, designed for fast cutting of aluminum and non-ferrous materials. With a 4 mm mill diameter and 12 mm length of cut, it is suited for high-speed machining operations where edge strength and reduced chipping are required.

SKU: 3G-OTH-203083
Available by RFQPenawaran + Layanan
Widia Hanita Uncoated carbide end mill with 2 flutes, 5 mm cutting diameter, 14 mm length of cut, and 0.2 mm corner radius. Designed for high-speed machining of aluminum and non-ferrous materials. The corner radius reduces edge chipping and improves tool strength during profiling, slotting, and finishing operations.
Widia Hanita

Widia Hanita Uncoated carbide end mill with 2 flutes, 5 mm cutting diameter, 14 mm length of cut, and 0.2 mm corner radius. Designed for high-speed machining of aluminum and non-ferrous materials. The corner radius reduces edge chipping and improves tool strength during profiling, slotting, and finishing operations.

SKU: 3G-OTH-203099
Available by RFQPenawaran + Layanan
Widia Hanita This uncoated carbide corner-radius end mill is designed for fast cutting of aluminum and non-ferrous materials. With a 4 mm diameter, 12 mm length of cut, 0.5 mm corner radius, and 3 flutes, it provides efficient chip evacuation and edge strength for finishing and semi-finishing operations in milling applications.
Widia Hanita

Widia Hanita This uncoated carbide corner-radius end mill is designed for fast cutting of aluminum and non-ferrous materials. With a 4 mm diameter, 12 mm length of cut, 0.5 mm corner radius, and 3 flutes, it provides efficient chip evacuation and edge strength for finishing and semi-finishing operations in milling applications.

SKU: 3G-OTH-203098
Available by RFQPenawaran + Layanan
Widia Hanita This uncoated carbide end mill features a 2.5 mm diameter, 9 mm length of cut, 0.2 mm corner radius, and 2 flutes. Designed for fast cutting of aluminum and non-ferrous materials, the corner radius reduces edge chipping and improves surface finish. Suitable for CNC milling applications requiring high material removal rates.
Widia Hanita

Widia Hanita This uncoated carbide end mill features a 2.5 mm diameter, 9 mm length of cut, 0.2 mm corner radius, and 2 flutes. Designed for fast cutting of aluminum and non-ferrous materials, the corner radius reduces edge chipping and improves surface finish. Suitable for CNC milling applications requiring high material removal rates.

SKU: 3G-OTH-203082
Available by RFQPenawaran + Layanan
Widia Hanita This uncoated carbide end mill features a 12 mm diameter, 25 mm length of cut, and 1 mm corner radius with 2 flutes. Designed for high-speed machining of aluminum and non-ferrous materials, its geometry reduces chipping and improves surface finish in slotting, profiling, and contouring operations.
Widia Hanita

Widia Hanita This uncoated carbide end mill features a 12 mm diameter, 25 mm length of cut, and 1 mm corner radius with 2 flutes. Designed for high-speed machining of aluminum and non-ferrous materials, its geometry reduces chipping and improves surface finish in slotting, profiling, and contouring operations.

SKU: 3G-OTH-203097
Available by RFQPenawaran + Layanan