Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

Widia Hanita 3G-OTH-279209 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 2AN9E07003SZT UNCOATED

13 produk yang kompatibel ditemukan untuk Widia Hanita 3G-OTH-279209. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:2AN9E07003SZT UNCOATEDWIDIA HANITA

Kecocokan referensi silang untuk “2AN9E07003SZT UNCOATED”

“2AN9E07003SZT UNCOATED” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

WIDIA HANITA Reduced-Neck Carbide Square End Mill for Aluminum, 1/4" Mill Dia, 5/16" LOC, 2-1/2" OAL, 2 Flute, Uncoated

WIDIA HANITA Reduced-Neck Carbide Square End Mill for Aluminum, 1/4" Mill Dia, 5/16" LOC, 2-1/2" OAL, 2 Flute, Uncoated

SKU: 3G-OTH-279209

Lihat Detail Penawaran + Layanan

Lebih banyak dari Widia Hanita

12 lainnya Widia Hanita produk dalam kisaran yang sama

Widia Hanita This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 3-flute geometry and reduced-neck design promote efficient chip evacuation and reduced vibration, suitable for slotting, profiling, and finishing operations.

Widia Hanita This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 3-flute geometry and reduced-neck design promote efficient chip evacuation and reduced vibration, suitable for slotting, profiling, and finishing operations.

SKU: 3G-OTH-279189

Lihat Detail Penawaran + Layanan

Widia Hanita This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. The 2-flute geometry and reduced neck provide efficient chip evacuation and reduced deflection, suitable for slotting, profiling, and pocketing applications. Uncoated, with 3/8" mill diameter, 1/2" length of cut, and 3" overall length.

Widia Hanita This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. The 2-flute geometry and reduced neck provide efficient chip evacuation and reduced deflection, suitable for slotting, profiling, and pocketing applications. Uncoated, with 3/8" mill diameter, 1/2" length of cut, and 3" overall length.

SKU: 3G-OTH-279146

Lihat Detail Penawaran + Layanan

Widia Hanita This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 2-flute geometry and uncoated finish provide efficient chip evacuation and a smooth surface finish in slotting, profiling, and pocketing applications.

Widia Hanita This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 2-flute geometry and uncoated finish provide efficient chip evacuation and a smooth surface finish in slotting, profiling, and pocketing applications.

SKU: 3G-OTH-279130

Lihat Detail Penawaran + Layanan

Widia Hanita This reduced-neck carbide square end mill is designed for machining aluminum and non-ferrous materials. With a 1/4" mill diameter, 5/16" length of cut, and 2 flutes, it provides efficient chip evacuation in slotting, profiling, and contouring applications. Uncoated, with 3-1/2" overall length.

Widia Hanita This reduced-neck carbide square end mill is designed for machining aluminum and non-ferrous materials. With a 1/4" mill diameter, 5/16" length of cut, and 2 flutes, it provides efficient chip evacuation in slotting, profiling, and contouring applications. Uncoated, with 3-1/2" overall length.

SKU: 3G-OTH-279168

Lihat Detail Penawaran + Layanan

Widia Hanita This reduced-neck carbide square end mill is designed for machining aluminum and non-ferrous materials. With a 1/2" mill diameter, 2 flutes, 5/8" length of cut, and 3-1/2" overall length, it is suitable for slotting, profiling, and contouring operations. The uncoated finish provides effective chip evacuation in general milling applications.

Widia Hanita This reduced-neck carbide square end mill is designed for machining aluminum and non-ferrous materials. With a 1/2" mill diameter, 2 flutes, 5/8" length of cut, and 3-1/2" overall length, it is suitable for slotting, profiling, and contouring operations. The uncoated finish provides effective chip evacuation in general milling applications.

SKU: 3G-OTH-279218

Lihat Detail Penawaran + Layanan

Widia Hanita Reduced-neck carbide square end mill for aluminum and non-ferrous materials. Two-flute design with 1" mill diameter, 1-1/4" length of cut, and 5-1/2" overall length. Uncoated. Suitable for slotting, profiling, and contouring applications.

Widia Hanita Reduced-neck carbide square end mill for aluminum and non-ferrous materials. Two-flute design with 1" mill diameter, 1-1/4" length of cut, and 5-1/2" overall length. Uncoated. Suitable for slotting, profiling, and contouring applications.

SKU: 3G-OTH-279172

Lihat Detail Penawaran + Layanan

Widia Hanita This reduced-neck carbide square end mill is designed for high-speed milling of aluminum and other non-ferrous materials. Its 2-flute geometry and uncoated finish promote efficient chip evacuation and good surface finish. Typical applications include general machining, aerospace, and automotive component manufacturing.

Widia Hanita This reduced-neck carbide square end mill is designed for high-speed milling of aluminum and other non-ferrous materials. Its 2-flute geometry and uncoated finish promote efficient chip evacuation and good surface finish. Typical applications include general machining, aerospace, and automotive component manufacturing.

SKU: 3G-OTH-279214

Lihat Detail Penawaran + Layanan

WIDIA HANITA Square End Mill: Carbide, 2 Flute, 1" Mill Dia, 1-1/4" LOC, 2-1/4" OAL (MPN 2AF9E05021SZT UNCOATED)

WIDIA HANITA Square End Mill: Carbide, 2 Flute, 1" Mill Dia, 1-1/4" LOC, 2-1/4" OAL (MPN 2AF9E05021SZT UNCOATED)

SKU: 3G-OTH-279132

Lihat Detail Penawaran + Layanan

Widia Hanita This reduced-neck carbide square end mill is designed for aluminum and non-ferrous materials. With 2 flutes, a 5/16" mill diameter, 3/8" length of cut, and 2-1/2" overall length, it is suited for slotting, profiling, and pocketing operations. The uncoated carbide construction provides efficient chip evacuation and reduced deflection in high-speed machining.

Widia Hanita This reduced-neck carbide square end mill is designed for aluminum and non-ferrous materials. With 2 flutes, a 5/16" mill diameter, 3/8" length of cut, and 2-1/2" overall length, it is suited for slotting, profiling, and pocketing operations. The uncoated carbide construction provides efficient chip evacuation and reduced deflection in high-speed machining.

SKU: 3G-OTH-279210

Lihat Detail Penawaran + Layanan

Widia Hanita This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 2-flute geometry and reduced-neck design provide efficient chip evacuation and reduced vibration, suitable for slotting, profiling, and finishing operations.

Widia Hanita This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 2-flute geometry and reduced-neck design provide efficient chip evacuation and reduced vibration, suitable for slotting, profiling, and finishing operations.

SKU: 3G-OTH-279197

Lihat Detail Penawaran + Layanan

WIDIA HANITA Square End Mill: Carbide, 2 Flute, 1/8" Mill Dia, 3/16" LOC, 1-1/2" OAL (MPN 2AN9E03000SZT UNCOATED)

WIDIA HANITA Square End Mill: Carbide, 2 Flute, 1/8" Mill Dia, 3/16" LOC, 1-1/2" OAL (MPN 2AN9E03000SZT UNCOATED)

SKU: 3G-OTH-279128

Lihat Detail Penawaran + Layanan

Widia Hanita This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 3-flute geometry and 3/8" diameter enable efficient chip evacuation and fine surface finishes in profiling, slotting, and contouring applications.

Widia Hanita This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 3-flute geometry and 3/8" diameter enable efficient chip evacuation and fine surface finishes in profiling, slotting, and contouring applications.

SKU: 3G-OTH-279241

Lihat Detail Penawaran + Layanan