Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

Sumitomo 3G-OTH-258400 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 2NCCCGA21.52WG-BNC2010

13 produk yang kompatibel ditemukan untuk Sumitomo 3G-OTH-258400. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:2NCCCGA21.52WG-BNC2010SUMITOMO

Kecocokan referensi silang untuk “2NCCCGA21.52WG-BNC2010”

“2NCCCGA21.52WG-BNC2010” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

SUMITOMO Diamond Indexable Turning Insert 2NCCCGA21.52WG-BNC2010

SUMITOMO Diamond Indexable Turning Insert 2NCCCGA21.52WG-BNC2010

SKU: 3G-OTH-258400

Lihat Detail Penawaran + Layanan

Lebih banyak dari Sumitomo

12 lainnya Sumitomo produk dalam kisaran yang sama

Sumitomo Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and plastics. Suitable for high-speed finishing operations requiring tight tolerances.

Sumitomo Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and plastics. Suitable for high-speed finishing operations requiring tight tolerances.

SKU: 3G-OTH-259533

Lihat Detail Penawaran + Layanan

Sumitomo Diamond indexable turning insert for precision machining of non-ferrous materials. Suitable for finishing operations on aluminum alloys and composites, offering high wear resistance and surface finish. Also designated as VNMG160408N-EG.

Sumitomo Diamond indexable turning insert for precision machining of non-ferrous materials. Suitable for finishing operations on aluminum alloys and composites, offering high wear resistance and surface finish. Also designated as VNMG160408N-EG.

SKU: 3G-OTH-259209

Lihat Detail Penawaran + Layanan

Sumitomo Diamond indexable turning insert for precision turning operations. Suitable for finishing and semi-finishing cuts on ferrous and non-ferrous materials in CNC lathes. Manufacturer part number DCGT21.50.5MESI-AC5025S.

Sumitomo Diamond indexable turning insert for precision turning operations. Suitable for finishing and semi-finishing cuts on ferrous and non-ferrous materials in CNC lathes. Manufacturer part number DCGT21.50.5MESI-AC5025S.

SKU: 3G-OTH-261004

Lihat Detail Penawaran + Layanan

Sumitomo Diamond indexable turning insert for precision machining of hard materials such as ceramics, composites, and non-ferrous metals. Suitable for high-speed turning operations requiring fine surface finish and wear resistance.

Sumitomo Diamond indexable turning insert for precision machining of hard materials such as ceramics, composites, and non-ferrous metals. Suitable for high-speed turning operations requiring fine surface finish and wear resistance.

SKU: 3G-OTH-261121

Lihat Detail Penawaran + Layanan

Sumitomo This diamond indexable turning insert features an 80° diamond shape, 0.4 mm nose radius, and 3.97 mm thickness. It is designed for light to medium cutting applications, suitable for finishing and semi-finishing operations on non-ferrous materials.

Sumitomo This diamond indexable turning insert features an 80° diamond shape, 0.4 mm nose radius, and 3.97 mm thickness. It is designed for light to medium cutting applications, suitable for finishing and semi-finishing operations on non-ferrous materials.

SKU: 3G-OTH-258656

Lihat Detail Penawaran + Layanan

Sumitomo Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Provides wear resistance and surface finish in industrial turning operations.

Sumitomo Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Provides wear resistance and surface finish in industrial turning operations.

SKU: 3G-OTH-260781

Lihat Detail Penawaran + Layanan

Sumitomo This diamond indexable turning insert is designed for precision turning operations. It is suitable for machining non-ferrous materials, composites, and abrasive workpieces where a sharp, wear-resistant cutting edge is required.

Sumitomo This diamond indexable turning insert is designed for precision turning operations. It is suitable for machining non-ferrous materials, composites, and abrasive workpieces where a sharp, wear-resistant cutting edge is required.

SKU: 3G-OTH-258953

Lihat Detail Penawaran + Layanan

Sumitomo Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for turning, facing, and profiling operations. Available in models 2NC-CCGA32.51 and 2NC-CCGW09T304.

Sumitomo Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for turning, facing, and profiling operations. Available in models 2NC-CCGA32.51 and 2NC-CCGW09T304.

SKU: 3G-OTH-255046

Lihat Detail Penawaran + Layanan

Sumitomo Diamond indexable turning insert for precision machining of hard materials. Suitable for turning operations requiring high wear resistance and fine surface finish. Available in CNGA432 and CNGA120408 geometries.

Sumitomo Diamond indexable turning insert for precision machining of hard materials. Suitable for turning operations requiring high wear resistance and fine surface finish. Available in CNGA432 and CNGA120408 geometries.

SKU: 3G-OTH-258200

Lihat Detail Penawaran + Layanan

Sumitomo Diamond indexable turning insert for precision machining of non-ferrous materials. Suitable for turning operations requiring high surface finish and dimensional accuracy.

Sumitomo Diamond indexable turning insert for precision machining of non-ferrous materials. Suitable for turning operations requiring high surface finish and dimensional accuracy.

SKU: 3G-OTH-261034

Lihat Detail Penawaran + Layanan

Sumitomo Diamond indexable turning insert with CNMG geometry, suitable for general-purpose turning, finishing, and light roughing on ferrous and non-ferrous materials. The AC5025S grade provides wear resistance for extended tool life.

Sumitomo Diamond indexable turning insert with CNMG geometry, suitable for general-purpose turning, finishing, and light roughing on ferrous and non-ferrous materials. The AC5025S grade provides wear resistance for extended tool life.

SKU: 3G-OTH-256250

Lihat Detail Penawaran + Layanan

Sumitomo Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Available in models 2NU-CCGA32.50.5WG and 2NU-CCGW09T302WG.

Sumitomo Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Available in models 2NU-CCGA32.50.5WG and 2NU-CCGW09T302WG.

SKU: 3G-OTH-258042

Lihat Detail Penawaran + Layanan