Osg 3G-OTH-231892 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 3095345

13 produk yang kompatibel ditemukan untuk Osg 3G-OTH-231892. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:3095345OSG

Kecocokan referensi silang untuk “3095345”

“3095345” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

OSG

OSG 3095345 Pencil-Neck Carbide Ball End Mill for Hardened Materials, WXS Coated, 3 Flute, 3 mm Dia, 4.5 mm LOC, 100 mm OAL

SKU: 3G-OTH-231892

Lihat Detail Penawaran + Layanan

Lebih banyak dari Osg

12 lainnya Osg produk dalam kisaran yang sama

Osg

Osg Carbide ball end mill with WXS coating and pencil-neck geometry for reduced deflection. 3 flutes, 10 mm mill diameter, 15 mm length of cut, 120 mm overall length. Designed for precision contouring, 3D profiling, and finishing complex shapes in hardened materials, commonly used in die and mold machining.

SKU: 3G-OTH-231867

Lihat Detail Penawaran + Layanan

Osg

Osg This OSG ball end mill is made of carbide with a WXL coating and features a pencil-neck design for deep cavity machining. It has a 1/64" mill diameter, 1/64" length of cut, and 2-1/2" overall length with 2 flutes. Suitable for precision contouring and finishing in hardened materials.

SKU: 3G-OTH-231721

Lihat Detail Penawaran + Layanan

Osg

Osg This carbide ball end mill features a pencil-neck geometry and WXS coating for machining hardened materials. With a 2 mm mill diameter, 3 mm length of cut, and 100 mm overall length, it is suited for precision contouring and 3D profiling in mold, die, and aerospace applications.

SKU: 3G-OTH-231784

Lihat Detail Penawaran + Layanan

Osg

Osg TiAlN-coated, 2-flute carbide ball end mill with pencil-neck design for machining hardened materials. Mill diameter and length of cut are 1/16", overall length 2-1/2". Suitable for precision contouring, 3D profiling, and die/mold work.

SKU: 3G-OTH-231844

Lihat Detail Penawaran + Layanan

Osg

Osg This OSG carbide ball end mill features a pencil-neck design for deep cavity machining and a WXL coating for enhanced wear resistance. With 2 flutes and a 1/4" diameter, it is suited for precision contouring and 3D profiling in hardened materials up to 65 HRC. Typical applications include mold and die work where reduced chatter and improved surface finish are required.

SKU: 3G-OTH-231850

Lihat Detail Penawaran + Layanan

Osg

Osg This OSG carbide ball end mill features a pencil-neck geometry and WXS coating for machining hardened materials. With a 6 mm mill diameter, 9 mm length of cut, 130 mm overall length, and 3 flutes, it is suited for precision contouring and 3D profiling in mold and die applications.

SKU: 3G-OTH-231893

Lihat Detail Penawaran + Layanan

Osg

Osg Carbide ball end mill with WXS coating for hardened materials. Pencil-neck design enables deep cavity machining. 1 mm mill diameter, 1.5 mm length of cut, 60 mm overall length, 3 flutes. Suitable for precision contouring and finishing in mold, die, and tooling applications.

SKU: 3G-OTH-231757

Lihat Detail Penawaran + Layanan

Osg

Osg This carbide ball end mill features a pencil-neck design for machining hardened materials. With a 3/32" mill diameter and 3/32" length of cut, it is suited for precision contouring, 3D profiling, and finishing complex shapes. The TiAlN coating provides heat resistance, and the 2-flute geometry aids chip evacuation.

SKU: 3G-OTH-231869

Lihat Detail Penawaran + Layanan

Osg

Osg This OSG pencil-neck carbide ball end mill features a WXS coating and 3-flute design for machining hardened materials. With a 2 mm mill diameter, 3 mm length of cut, and 60 mm overall length, it is suited for precision contouring and 3D profiling in mold and die work, aerospace components, and tool steel applications.

SKU: 3G-OTH-231880

Lihat Detail Penawaran + Layanan

Osg

Osg This OSG carbide ball end mill features a pencil-neck design for machining hardened materials. With WXL coating and 2 flutes, it is suited for contouring, slotting, and profiling operations requiring smooth surface finishes. Mill diameter and length of cut are 3/32"; overall length is 3-1/8".

SKU: 3G-OTH-231730

Lihat Detail Penawaran + Layanan

Osg

Osg TiAlN-coated, 2-flute carbide ball end mill with pencil-neck geometry for deep cavity work. Mill diameter 5 mm, length of cut 5 mm, overall length 80 mm. Designed for precision contouring, 3D profiling, and finishing complex shapes in hardened materials.

SKU: 3G-OTH-231807

Lihat Detail Penawaran + Layanan

Osg

Osg Carbide ball end mill with pencil-neck geometry and WXS coating for machining hardened materials. Features 3 flutes, 3 mm cutting diameter, 2.25 mm length of cut, and 60 mm overall length. Suitable for contouring, finishing, and detail work in mold, die, and tooling applications.

SKU: 3G-OTH-231788

Lihat Detail Penawaran + Layanan