Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar

Osg 3G-OTH-244662 — Suku Cadang & Alternatif yang Kompatibel

Anda mencari 3106660

13 produk yang kompatibel ditemukan untuk Osg 3G-OTH-244662. Semua barang dikirim ke seluruh dunia melalui DHL.

Juga dikenal sebagai:3106660OSG

Kecocokan referensi silang untuk “3106660”

“3106660” terlihat seperti nomor suku cadang pesaing / OEM. Setara dari katalog 3G Electricadalah di bawah. Bukan kecocokan yang tepat? Jaringan pemasok global kami mencakup ribuan merek — tambahkan ke RFQ dan kami akan memberikan penawaran.

OSG 3106660 Carbide Ball End Mill, WXL Coated, 2 Flute, 12 mm Dia, 18 mm LOC, 110 mm OAL
OSG

OSG 3106660 Carbide Ball End Mill, WXL Coated, 2 Flute, 12 mm Dia, 18 mm LOC, 110 mm OAL

SKU: 3G-OTH-244662
Available by RFQPenawaran + Layanan

Lebih banyak dari Osg

12 lainnya Osg produk dalam kisaran yang sama

Osg This OSG carbide ball end mill features a WXS coating and 2-flute geometry for machining hardened materials. With a 6 mm diameter, 9 mm length of cut, and 75 mm overall length, it is suited for precision contouring and 3D profiling in mold, die, and aerospace applications.
Osg

Osg This OSG carbide ball end mill features a WXS coating and 2-flute geometry for machining hardened materials. With a 6 mm diameter, 9 mm length of cut, and 75 mm overall length, it is suited for precision contouring and 3D profiling in mold, die, and aerospace applications.

SKU: 3G-OTH-244590
Available by RFQPenawaran + Layanan
Osg Solid carbide ball end mill with WXL coating for machining hardened materials up to 65 HRC. Two-flute design with 1/2" cutting diameter and 1/2" length of cut, 4" overall length. Suitable for precision contouring and 3D profiling in die and mold applications.
Osg

Osg Solid carbide ball end mill with WXL coating for machining hardened materials up to 65 HRC. Two-flute design with 1/2" cutting diameter and 1/2" length of cut, 4" overall length. Suitable for precision contouring and 3D profiling in die and mold applications.

SKU: 3G-OTH-244611
Available by RFQPenawaran + Layanan
Osg This carbide ball end mill features a WXL coating and two flutes, designed for machining hardened materials. With a 6 mm mill diameter, 10 mm length of cut, and 90 mm overall length, it is suitable for contouring and 3D machining operations in tool and die applications.
Osg

Osg This carbide ball end mill features a WXL coating and two flutes, designed for machining hardened materials. With a 6 mm mill diameter, 10 mm length of cut, and 90 mm overall length, it is suitable for contouring and 3D machining operations in tool and die applications.

SKU: 3G-OTH-244659
Available by RFQPenawaran + Layanan
Osg This OSG carbide ball end mill features a WXS coating and 5-flute geometry for machining hardened materials up to 65 HRC. With a 1/32" mill diameter, 3/64" length of cut, and 2" overall length, it is suited for precision contouring and 3D profiling in die/mold and tool steel applications.
Osg

Osg This OSG carbide ball end mill features a WXS coating and 5-flute geometry for machining hardened materials up to 65 HRC. With a 1/32" mill diameter, 3/64" length of cut, and 2" overall length, it is suited for precision contouring and 3D profiling in die/mold and tool steel applications.

SKU: 3G-OTH-244634
Available by RFQPenawaran + Layanan
Osg Solid carbide ball end mill with WXS coating for machining hardened materials. Two-flute design with 3/16" cutting diameter, 9/32" length of cut, and 3" overall length. Suitable for contouring, 3D profiling, and finishing operations in mold, die, and tooling applications.
Osg

Osg Solid carbide ball end mill with WXS coating for machining hardened materials. Two-flute design with 3/16" cutting diameter, 9/32" length of cut, and 3" overall length. Suitable for contouring, 3D profiling, and finishing operations in mold, die, and tooling applications.

SKU: 3G-OTH-244639
Available by RFQPenawaran + Layanan
Osg This OSG carbide ball end mill features a WXS coating for reduced heat and wear. With a 1/4" diameter, 2 flutes, 3/8" length of cut, and 2" overall length, it is suited for precision contouring and 3D profiling in hardened materials up to 65 HRC. Typical applications include mold and die work in machining operations.
Osg

Osg This OSG carbide ball end mill features a WXS coating for reduced heat and wear. With a 1/4" diameter, 2 flutes, 3/8" length of cut, and 2" overall length, it is suited for precision contouring and 3D profiling in hardened materials up to 65 HRC. Typical applications include mold and die work in machining operations.

SKU: 3G-OTH-244653
Available by RFQPenawaran + Layanan
Osg Solid carbide ball end mill with WXL coating for hardened materials up to 65 HRC. Two-flute geometry aids chip evacuation. Suitable for contouring, slotting, and profiling in mold, die, and aerospace work.
Osg

Osg Solid carbide ball end mill with WXL coating for hardened materials up to 65 HRC. Two-flute geometry aids chip evacuation. Suitable for contouring, slotting, and profiling in mold, die, and aerospace work.

SKU: 3G-OTH-244636
Available by RFQPenawaran + Layanan
Osg This OSG carbide ball end mill features a WXL coating for enhanced wear resistance and thermal stability. With 2 flutes, a 1.5 mm mill diameter, 2 mm length of cut, and 50 mm overall length, it is suited for precision contouring and 3D profiling in hardened materials up to 70 HRC. Typical applications include mold and die making, aerospace, and automotive tooling where fine surface finish and tight tolerances are required.
Osg

Osg This OSG carbide ball end mill features a WXL coating for enhanced wear resistance and thermal stability. With 2 flutes, a 1.5 mm mill diameter, 2 mm length of cut, and 50 mm overall length, it is suited for precision contouring and 3D profiling in hardened materials up to 70 HRC. Typical applications include mold and die making, aerospace, and automotive tooling where fine surface finish and tight tolerances are required.

SKU: 3G-OTH-244646
Available by RFQPenawaran + Layanan
Osg This carbide ball end mill features a WXL coating for enhanced wear resistance and is designed for precision contouring and 3D profiling in hardened materials. With 2 flutes and a 3.5 mm diameter, it is suited for mold and die making, aerospace, and automotive tooling applications requiring fine surface finish and dimensional accuracy.
Osg

Osg This carbide ball end mill features a WXL coating for enhanced wear resistance and is designed for precision contouring and 3D profiling in hardened materials. With 2 flutes and a 3.5 mm diameter, it is suited for mold and die making, aerospace, and automotive tooling applications requiring fine surface finish and dimensional accuracy.

SKU: 3G-OTH-244648
Available by RFQPenawaran + Layanan
Osg This carbide ball end mill features a WXS coating and 2-flute geometry for machining hardened materials. With a 1/8" cutting diameter, 3/16" length of cut, and 3" overall length, it is suited for contouring and 3D profiling in mold and die applications.
Osg

Osg This carbide ball end mill features a WXS coating and 2-flute geometry for machining hardened materials. With a 1/8" cutting diameter, 3/16" length of cut, and 3" overall length, it is suited for contouring and 3D profiling in mold and die applications.

SKU: 3G-OTH-244595
Available by RFQPenawaran + Layanan
Osg This carbide ball end mill features a WXL coating and 2-flute geometry for machining hardened materials. With a 3/16" mill diameter, 3/16" length of cut, and 3" overall length, it is suited for precision contouring and 3D profiling in mold and die applications.
Osg

Osg This carbide ball end mill features a WXL coating and 2-flute geometry for machining hardened materials. With a 3/16" mill diameter, 3/16" length of cut, and 3" overall length, it is suited for precision contouring and 3D profiling in mold and die applications.

SKU: 3G-OTH-244601
Available by RFQPenawaran + Layanan
Osg This OSG carbide ball end mill features a WXL coating and 2-flute geometry for machining hardened materials. With a 4 mm mill diameter, 8 mm length of cut, and 60 mm overall length, it is suited for precision contouring and 3D machining in mold, die, and similar applications.
Osg

Osg This OSG carbide ball end mill features a WXL coating and 2-flute geometry for machining hardened materials. With a 4 mm mill diameter, 8 mm length of cut, and 60 mm overall length, it is suited for precision contouring and 3D machining in mold, die, and similar applications.

SKU: 3G-OTH-244628
Available by RFQPenawaran + Layanan