3M Sleeve Kit: Round, 12 in Overall Lg, 1 in Overall Wd, 4 hr
The 3M DT100 Sleeve Kit is a round firestop passthrough for cables, rated for 4-hour fire protection. It measures 12 inches in overall length and 1 inch in overall width, and includes two mounting plates. This kit…
SKU 3G-OTH-553343
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The 3M DT100 Sleeve Kit is a round firestop passthrough for cables, rated for 4-hour fire protection. It measures 12 inches in overall length and 1 inch in overall width, and includes two mounting plates. This kit provides a fire-rated seal for cable penetrations through walls or floors.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the 3M DT100 Sleeve Kit used for?
The 3M DT100 Sleeve Kit is a round firestop passthrough for cables, providing a 4-hour fire-rated seal for cable penetrations through walls or floors. It includes two mounting plates and measures 12 inches long by 1 inch wide, helping maintain fire-resistance ratings in commercial and industrial buildings.
What are the specifications of the 3M DT100 Sleeve Kit?
The 3M DT100 Sleeve Kit is a round firestop passthrough rated for 4-hour fire protection for cables. It has an overall length of 12 in and overall width of 1 in, with two mounting plates included. The manufacturer part number is DT100, and it is designed for cable penetrations.
Where to buy the 3M DT100 Sleeve Kit worldwide?
3G Electric supplies the 3M DT100 Sleeve Kit worldwide, handling full logistics and customs clearance for international orders. As a global industrial solutions provider, we source and deliver genuine 3M firestop products to support your fire-rated cable penetration needs across any region.
How to install the 3M DT100 Sleeve Kit?
Install the 3M DT100 Sleeve Kit by positioning the round sleeve around cables passing through a wall or floor opening, then securing it with the two included mounting plates. Follow generic firestop installation best practices: ensure a tight seal, use compatible firestop sealant if required, and verify the assembly meets local fire codes.
Digunakan dalam
Aplikasi umum untuk 3M3M Produk
3G Electric memasok 3M firestop passthroughs for cables. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
