Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
AIGNEP USA Push-to-Connect x Universal Thread Elbow Fitting, 4 mm OD x 1/4 in - Nylon & Nickel-Plated Brass Tube Fittings
AIGNEP USANylon & Nickel-Plated Brass Tube Fittings

AIGNEP USA Push-to-Connect x Universal Thread Elbow Fitting, 4 mm OD x 1/4 in

AIGNEP USA Push-Fit Elbow Fitting adalah sambungan pipa dorong-ke-sambung (push-to-connect) yang dirancang untuk sistem pneumatik dan fluida bertekanan rendah. Dengan spesifikasi 4 mm OD x 1/4 in Pipe Size, fitting…

SKU 3G-OTH-492674

Juga terdaftar sebagai: 55110414 · 55110 4 1 4 · 55110-4-1-4

Merek
AIGNEP USA
Item
Push-to-Connect x Universal Thread Elbow Fitting, 4 mm OD x 1/4 in
Kategori
Nylon & Nickel-Plated Brass Tube Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

AIGNEP USA
Manufacturer Part Number
55110-4-1/4
Type
Push-to-Connect x Universal Thread

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

AIGNEP USA Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

AIGNEP USA Push-Fit Elbow Fitting adalah sambungan pipa dorong-ke-sambung (push-to-connect) yang dirancang untuk sistem pneumatik dan fluida bertekanan rendah. Dengan spesifikasi 4 mm OD x 1/4 in Pipe Size, fitting ini terbuat dari nilon dan kuningan berlapis nikel, memberikan ketahanan korosi yang baik. Cocok untuk aplikasi peralatan industri yang membutuhkan instalasi cepat dan andal tanpa alat khusus.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa AIGNEP USA Push-Fit Elbow Fitting digunakan?

Fitting ini digunakan untuk menyambungkan pipa berdiameter luar 4 mm ke ulir pipa 1/4 inci pada sistem pneumatik atau fluida bertekanan rendah. Desain push-to-connect memungkinkan pemasangan tanpa alat, ideal untuk aplikasi peralatan industri seperti panel kontrol dan jalur udara.

Apa spesifikasi AIGNEP USA Push-Fit Elbow Fitting 55110-4-1/4?

Spesifikasi fitting ini meliputi tipe Push-to-Connect x Universal Thread, merek AIGNEP USA, nomor bagian pabrikan 55110-4-1/4, ukuran pipa 4 mm OD x 1/4 in Pipe Size, dan bahan nilon serta kuningan berlapis nikel.

Di mana beli AIGNEP USA Push-Fit Elbow Fitting di Indonesia?

Anda dapat membeli AIGNEP USA Push-Fit Elbow Fitting melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat fokus pada operasional pabrik.

Bagaimana cara memasang AIGNEP USA Push-Fit Elbow Fitting?

Pemasangan fitting ini cukup dengan mendorong pipa berdiameter 4 mm ke dalam fitting hingga terkunci secara otomatis. Untuk melepas, tekan cincin pelepas dan tarik pipa keluar. Pastikan pipa dipotong rapi dan bebas dari kotoran sebelum pemasangan.

Digunakan dalam

Aplikasi umum untuk AIGNEP USA
Pneumatic actuator speed control — AIGNEP USA elbow-style speed control valves (e.g., 88973-04-04) regulate cylinder extension and retraction rates.
Compressed air system backflow prevention — AIGNEP USA check valves (e.g., 82663-06) prevent reverse flow in air distribution lines.
Quick exhaust for cylinder retraction — AIGNEP USA quick exhaust valves (e.g., 82650-06) accelerate exhaust air from pneumatic actuators.
Flow regulation in control panels — AIGNEP USA universal flow control valves (e.g., 88953-06-04) adjust air flow in manifold or panel-mounted circuits.
Pneumatic tool supply lines — AIGNEP USA check valves maintain pressure in tool feed lines and prevent backflow during tool changes.
Automated assembly line pneumatic circuits — AIGNEP USA speed control valves (e.g., 88977-04-04) fine-tune motion in pick-and-place or clamping operations.
Not sure this is the right part? Photo-identify it→

AIGNEP USA Produk

3G Electric memasok AIGNEP USA nylon & nickel-plated brass tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari AIGNEP USA

Lihat semua AIGNEP USA suku cadang →
This nylon push-fit tee fitting connects three tubes of 14 mm OD and 3/8 in pipe size, creating a branch in pneumatic or fluid systems. It features a nickel-plated brass insert and an overall length of 2-1/4 in. The push-fit design allows tool-free installation for low-pressure applications
AIGNEP USA
This nylon push-fit tee fitting connects three tubes of 14 mm OD and 3/8 in pipe size, creating a branch in pneumatic or fluid systems. It features a nickel-plated brass insert and an overall length of 2-1/4 in. The push-fit design allows tool-free installation for low-pressure applications
This nylon and nickel-plated brass wye fitting has a 1/4" thread size and is black in color. It is used to split or combine flow in pneumatic or fluid systems, providing corrosion resistance in industrial environments
AIGNEP USA
This nylon and nickel-plated brass wye fitting has a 1/4" thread size and is black in color. It is used to split or combine flow in pneumatic or fluid systems, providing corrosion resistance in industrial environments
Nylon and nickel-plated brass wye fitting with push-to-connect ends for 1/4 in OD tubing. Features a 1/8-27 thread size A. Used to split or combine airflow in pneumatic systems
AIGNEP USA
Nylon and nickel-plated brass wye fitting with push-to-connect ends for 1/4 in OD tubing. Features a 1/8-27 thread size A. Used to split or combine airflow in pneumatic systems
This elbow fitting connects 12 mm OD tubing to 1/2 in pipe threads via a push-to-connect mechanism. Constructed with a nylon body and nickel-plated brass components, it is suited for pneumatic systems in industrial automation and material handling where space is limited
AIGNEP USA
This elbow fitting connects 12 mm OD tubing to 1/2 in pipe threads via a push-to-connect mechanism. Constructed with a nylon body and nickel-plated brass components, it is suited for pneumatic systems in industrial automation and material handling where space is limited
Nylon push-fit wye fitting with nickel-plated brass components. Connects two 12 mm OD tubes to a 3/8 in pipe thread. Overall length 2 5/8 in. Used to split or combine pneumatic or fluid lines in industrial systems
AIGNEP USA
Nylon push-fit wye fitting with nickel-plated brass components. Connects two 12 mm OD tubes to a 3/8 in pipe thread. Overall length 2 5/8 in. Used to split or combine pneumatic or fluid lines in industrial systems
This elbow fitting connects 14 mm OD tubing to a 3/8 in universal thread port. It features a push-to-connect design for quick, leak-free assembly in pneumatic systems. The body is constructed of nylon and nickel-plated brass
AIGNEP USA
This elbow fitting connects 14 mm OD tubing to a 3/8 in universal thread port. It features a push-to-connect design for quick, leak-free assembly in pneumatic systems. The body is constructed of nylon and nickel-plated brass
Nylon and nickel-plated brass tube fitting with Push-to-Connect x Universal Thread configuration. Connects 8 mm OD tubing to 3/8 in pipe thread. Used in pneumatic systems for industrial automation, packaging, and material handling applications
AIGNEP USA
Nylon and nickel-plated brass tube fitting with Push-to-Connect x Universal Thread configuration. Connects 8 mm OD tubing to 3/8 in pipe thread. Used in pneumatic systems for industrial automation, packaging, and material handling applications
This nylon and nickel-plated brass wye fitting connects 4 mm OD tubing to a 1/4 in pipe port with M10 thread. It is used for branching in pneumatic or fluid systems, providing a compact and leak-free connection in industrial controls and automation applications
AIGNEP USA
This nylon and nickel-plated brass wye fitting connects 4 mm OD tubing to a 1/4 in pipe port with M10 thread. It is used for branching in pneumatic or fluid systems, providing a compact and leak-free connection in industrial controls and automation applications