Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
AIGNEP USA Push-Fit Tee Fitting: 12 mm OD x 3/8 in Pipe x 12 mm OD - Nylon & Nickel-Plated Brass Tube Fittings
AIGNEP USANylon & Nickel-Plated Brass Tube Fittings

AIGNEP USA Push-Fit Tee Fitting: 12 mm OD x 3/8 in Pipe x 12 mm OD

Fitting Tee Push-Fit AIGNEP USA dengan material Nylon dan kuningan berlapis nikel, dirancang untuk sistem perpipaan pneumatik dan fluida bertekanan rendah. Produk ini memiliki ukuran 12 mm OD x 3/8 in Pipe x 12 mm OD…

SKU 3G-OTH-492423

Juga terdaftar sebagai: 552101238 · 55210 12 3 8 · 55210-12-3-8

Merek
AIGNEP USA
Item
Push-Fit Tee Fitting: 12 mm OD x 3/8 in Pipe x 12 mm OD
Kategori
Nylon & Nickel-Plated Brass Tube Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

AIGNEP USA
Manufacturer Part Number
55210-12-3/8
Type
Nylon
Overall Lg
2 5/8 in

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

AIGNEP USA Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Fitting Tee Push-Fit AIGNEP USA dengan material Nylon dan kuningan berlapis nikel, dirancang untuk sistem perpipaan pneumatik dan fluida bertekanan rendah. Produk ini memiliki ukuran 12 mm OD x 3/8 in Pipe x 12 mm OD dengan panjang keseluruhan 2 5/8 in, cocok untuk sambungan cepat tanpa alat pada instalasi peralatan industri. Sebagai komponen sambungan pipa yang andal, fitting ini memudahkan perawatan dan modifikasi jalur udara atau air di pabrik Anda.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa fitting tee push-fit AIGNEP USA digunakan?

Fitting tee push-fit AIGNEP USA digunakan untuk membuat sambungan cabang tiga arah pada sistem pipa pneumatik atau fluida bertekanan rendah. Dengan desain push-fit, Anda dapat memasangnya tanpa alat khusus, cukup dorong pipa hingga terkunci. Produk ini cocok untuk aplikasi peralatan industri yang membutuhkan sambungan cepat dan andal.

Apa spesifikasi fitting tee push-fit AIGNEP USA 55210-12-3/8?

Fitting ini memiliki nomor bagian pabrikan 55210-12-3/8, terbuat dari material Nylon dan kuningan berlapis nikel. Ukurannya adalah 12 mm OD x 3/8 in Pipe x 12 mm OD dengan panjang keseluruhan 2 5/8 in. Produk ini dirancang untuk sistem pipa berdiameter 12 mm dan sambungan ulir 3/8 inci.

Di mana beli fitting tee push-fit AIGNEP USA di Indonesia?

Anda dapat membeli fitting tee push-fit AIGNEP USA melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima peralatan industri ini dengan mudah. Hubungi kami untuk minta penawaran.

Bagaimana cara memasang fitting push-fit AIGNEP USA?

Pemasangan fitting push-fit AIGNEP USA sangat mudah: potong pipa dengan rapi, masukkan ujung pipa ke dalam fitting hingga terdengar bunyi klik yang menandakan pipa terkunci. Untuk melepas, tekan cincin pengunci pada fitting lalu tarik pipa keluar. Pastikan pipa bersih dan tidak cacat sebelum pemasangan.

Digunakan dalam

Aplikasi umum untuk AIGNEP USA
Pneumatic actuator speed control — AIGNEP USA elbow-style speed control valves (e.g., 88973-04-04) regulate cylinder extension and retraction rates.
Compressed air system backflow prevention — AIGNEP USA check valves (e.g., 82663-06) prevent reverse flow in air distribution lines.
Quick exhaust for cylinder retraction — AIGNEP USA quick exhaust valves (e.g., 82650-06) accelerate exhaust air from pneumatic actuators.
Flow regulation in control panels — AIGNEP USA universal flow control valves (e.g., 88953-06-04) adjust air flow in manifold or panel-mounted circuits.
Pneumatic tool supply lines — AIGNEP USA check valves maintain pressure in tool feed lines and prevent backflow during tool changes.
Automated assembly line pneumatic circuits — AIGNEP USA speed control valves (e.g., 88977-04-04) fine-tune motion in pick-and-place or clamping operations.
Not sure this is the right part? Photo-identify it→

AIGNEP USA Produk

3G Electric memasok AIGNEP USA nylon & nickel-plated brass tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari AIGNEP USA

Lihat semua AIGNEP USA suku cadang →
This nylon push-fit tee fitting connects three tubes of 14 mm OD and 3/8 in pipe size, creating a branch in pneumatic or fluid systems. It features a nickel-plated brass insert and an overall length of 2-1/4 in. The push-fit design allows tool-free installation for low-pressure applications
AIGNEP USA
This nylon push-fit tee fitting connects three tubes of 14 mm OD and 3/8 in pipe size, creating a branch in pneumatic or fluid systems. It features a nickel-plated brass insert and an overall length of 2-1/4 in. The push-fit design allows tool-free installation for low-pressure applications
This nylon and nickel-plated brass wye fitting has a 1/4" thread size and is black in color. It is used to split or combine flow in pneumatic or fluid systems, providing corrosion resistance in industrial environments
AIGNEP USA
This nylon and nickel-plated brass wye fitting has a 1/4" thread size and is black in color. It is used to split or combine flow in pneumatic or fluid systems, providing corrosion resistance in industrial environments
Nylon and nickel-plated brass wye fitting with push-to-connect ends for 1/4 in OD tubing. Features a 1/8-27 thread size A. Used to split or combine airflow in pneumatic systems
AIGNEP USA
Nylon and nickel-plated brass wye fitting with push-to-connect ends for 1/4 in OD tubing. Features a 1/8-27 thread size A. Used to split or combine airflow in pneumatic systems
This elbow fitting connects 12 mm OD tubing to 1/2 in pipe threads via a push-to-connect mechanism. Constructed with a nylon body and nickel-plated brass components, it is suited for pneumatic systems in industrial automation and material handling where space is limited
AIGNEP USA
This elbow fitting connects 12 mm OD tubing to 1/2 in pipe threads via a push-to-connect mechanism. Constructed with a nylon body and nickel-plated brass components, it is suited for pneumatic systems in industrial automation and material handling where space is limited
Nylon push-fit wye fitting with nickel-plated brass components. Connects two 12 mm OD tubes to a 3/8 in pipe thread. Overall length 2 5/8 in. Used to split or combine pneumatic or fluid lines in industrial systems
AIGNEP USA
Nylon push-fit wye fitting with nickel-plated brass components. Connects two 12 mm OD tubes to a 3/8 in pipe thread. Overall length 2 5/8 in. Used to split or combine pneumatic or fluid lines in industrial systems
This elbow fitting connects 14 mm OD tubing to a 3/8 in universal thread port. It features a push-to-connect design for quick, leak-free assembly in pneumatic systems. The body is constructed of nylon and nickel-plated brass
AIGNEP USA
This elbow fitting connects 14 mm OD tubing to a 3/8 in universal thread port. It features a push-to-connect design for quick, leak-free assembly in pneumatic systems. The body is constructed of nylon and nickel-plated brass
Nylon and nickel-plated brass tube fitting with Push-to-Connect x Universal Thread configuration. Connects 8 mm OD tubing to 3/8 in pipe thread. Used in pneumatic systems for industrial automation, packaging, and material handling applications
AIGNEP USA
Nylon and nickel-plated brass tube fitting with Push-to-Connect x Universal Thread configuration. Connects 8 mm OD tubing to 3/8 in pipe thread. Used in pneumatic systems for industrial automation, packaging, and material handling applications
This nylon and nickel-plated brass wye fitting connects 4 mm OD tubing to a 1/4 in pipe port with M10 thread. It is used for branching in pneumatic or fluid systems, providing a compact and leak-free connection in industrial controls and automation applications
AIGNEP USA
This nylon and nickel-plated brass wye fitting connects 4 mm OD tubing to a 1/4 in pipe port with M10 thread. It is used for branching in pneumatic or fluid systems, providing a compact and leak-free connection in industrial controls and automation applications