Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
Steker AIGNEP USA: Steker Padat, 3/8 in, Berulir BSPT, 1.000 psi, Panjang 1/2 in - Chrome-Plated Threaded High-Pressure Pipe Fittings
AIGNEP USAChrome-Plated Threaded High-Pressure Pipe Fittings

Steker AIGNEP USA: Steker Padat, 3/8 in, Berulir BSPT, 1.000 psi, Panjang 1/2 in

AIGNEP USA Plug: Solid Plug adalah fitting pipa bertekanan tinggi berlapis krom yang dirancang untuk aplikasi industri. Dengan spesifikasi teknis seperti panjang 1/2 in, tipe ulir BSPT 3/8 in, dan tekanan operasi…

SKU 3G-OTH-460721

Juga terdaftar sebagai: 8030CSP06 · 8030 CSP 06 · 8030-CSP-06

Merek
AIGNEP USA
Item
Steker AIGNEP USA: Steker Padat, 3/8 in, Berulir BSPT, 1.000 psi, Panjang 1/2 in
Kategori
Chrome-Plated Threaded High-Pressure Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

AIGNEP USA
Manufacturer Part Number
8030 CSP-06
Type
3/8 in, BSPT Threaded, 1,000 psi, Chrome-Plated CA360 Brass
Lg
1/2 in
Maximum Operating Pressure
1,000 psi

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

AIGNEP USA Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

AIGNEP USA Plug: Solid Plug adalah fitting pipa bertekanan tinggi berlapis krom yang dirancang untuk aplikasi industri. Dengan spesifikasi teknis seperti panjang 1/2 in, tipe ulir BSPT 3/8 in, dan tekanan operasi maksimum 1.000 psi, produk ini terbuat dari kuningan CA360 berlapis krom. Cocok digunakan sebagai komponen dalam sistem perpipaan bertekanan tinggi di berbagai sektor industri.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa AIGNEP USA Plug: Solid Plug digunakan?

Plug ini digunakan sebagai penutup atau penyumbat pada sambungan pipa berulir BSPT 3/8 in dengan tekanan operasi maksimum 1.000 psi. Material kuningan CA360 berlapis krom memberikan ketahanan korosi yang baik, cocok untuk sistem perpipaan bertekanan tinggi di industri.

Apa spesifikasi AIGNEP USA Plug: Solid Plug?

Spesifikasi produk ini meliputi panjang 1/2 in, tipe ulir BSPT 3/8 in, tekanan operasi maksimum 1.000 psi, dan material Chrome-Plated CA360 Brass. Nomor komponen pabrikan adalah 8030 CSP-06.

Di mana beli AIGNEP USA Plug: Solid Plug di Indonesia?

Anda dapat membeli AIGNEP USA Plug: Solid Plug melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih AIGNEP USA Plug yang tepat?

Pilih plug berdasarkan ukuran ulir BSPT yang sesuai dengan sistem perpipaan Anda. Produk ini memiliki ulir BSPT 3/8 in dan tekanan operasi maksimum 1.000 psi. Pastikan material kuningan CA360 berlapis krom cocok dengan lingkungan aplikasi Anda.

Digunakan dalam

Aplikasi umum untuk AIGNEP USA
Pneumatic actuator speed control — AIGNEP USA elbow-style speed control valves (e.g., 88973-04-04) regulate cylinder extension and retraction rates.
Compressed air system backflow prevention — AIGNEP USA check valves (e.g., 82663-06) prevent reverse flow in air distribution lines.
Quick exhaust for cylinder retraction — AIGNEP USA quick exhaust valves (e.g., 82650-06) accelerate exhaust air from pneumatic actuators.
Flow regulation in control panels — AIGNEP USA universal flow control valves (e.g., 88953-06-04) adjust air flow in manifold or panel-mounted circuits.
Pneumatic tool supply lines — AIGNEP USA check valves maintain pressure in tool feed lines and prevent backflow during tool changes.
Automated assembly line pneumatic circuits — AIGNEP USA speed control valves (e.g., 88977-04-04) fine-tune motion in pick-and-place or clamping operations.

AIGNEP USA Produk

3G Electric memasok AIGNEP USA chrome-plated threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Nickel brass check valve with 3/8 in male NPT connections on both ends. Rated for maximum pressure of 116 psi. Used in pneumatic systems to allow flow in one direction and prevent backflow, suitable for industrial air lines and control circuits
AIGNEP USA
Nickel brass check valve with 3/8 in male NPT connections on both ends. Rated for maximum pressure of 116 psi. Used in pneumatic systems to allow flow in one direction and prevent backflow, suitable for industrial air lines and control circuits
Nickel-plated brass push-to-connect fitting for 6 mm OD tubing with 1/4"-19 BSPP male thread. Used in pneumatic and low-pressure fluid systems to connect tubing to threaded ports. Supplied as a 5-pack
AIGNEP USA
Nickel-plated brass push-to-connect fitting for 6 mm OD tubing with 1/4"-19 BSPP male thread. Used in pneumatic and low-pressure fluid systems to connect tubing to threaded ports. Supplied as a 5-pack
This nickel-plated brass push-fit tee fitting has three 1/4 in OD ports for branching pneumatic or fluid lines. It enables tool-free connections in tubing systems for industrial applications. Supplied as a 10-pack in silver finish
AIGNEP USA
This nickel-plated brass push-fit tee fitting has three 1/4 in OD ports for branching pneumatic or fluid lines. It enables tool-free connections in tubing systems for industrial applications. Supplied as a 10-pack in silver finish
Nickel-plated brass push-to-connect fitting with universal thread for connecting 1/4 in OD tubing to a 3/8-18 threaded port. Suitable for pneumatic and fluid control systems in industrial automation, packaging, and material handling. Pack of 5
AIGNEP USA
Nickel-plated brass push-to-connect fitting with universal thread for connecting 1/4 in OD tubing to a 3/8-18 threaded port. Suitable for pneumatic and fluid control systems in industrial automation, packaging, and material handling. Pack of 5
Nickel-plated brass tube fitting with push-to-connect on one end and universal thread on the other. Connects 1/2 in OD tubing to 1/2 in pipe size with 1/2"-14 thread. Supplied in a 3-pack. Suitable for pneumatic and fluid-handling systems
AIGNEP USA
Nickel-plated brass tube fitting with push-to-connect on one end and universal thread on the other. Connects 1/2 in OD tubing to 1/2 in pipe size with 1/2"-14 thread. Supplied in a 3-pack. Suitable for pneumatic and fluid-handling systems
Nickel-plated brass push-fit adapter fitting for connecting 12 mm OD tubing to 1/4 in pipe threads. Overall length 1 1/4 in. Suitable for pneumatic and fluid systems in industrial automation, packaging, and material handling. Pack of 3
AIGNEP USA
Nickel-plated brass push-fit adapter fitting for connecting 12 mm OD tubing to 1/4 in pipe threads. Overall length 1 1/4 in. Suitable for pneumatic and fluid systems in industrial automation, packaging, and material handling. Pack of 3

Lainnya dari AIGNEP USA

Lihat semua AIGNEP USA suku cadang →
Solid plug with 1/2-inch BSPT thread, 5/8-inch length, rated for 1000 psi maximum operating pressure. Made from chrome-plated CA360 brass. Used to seal threaded ports in high-pressure pneumatic or hydraulic systems, manifolds, and valve assemblies
AIGNEP USA
Solid plug with 1/2-inch BSPT thread, 5/8-inch length, rated for 1000 psi maximum operating pressure. Made from chrome-plated CA360 brass. Used to seal threaded ports in high-pressure pneumatic or hydraulic systems, manifolds, and valve assemblies
Solid plug for sealing threaded ports in high-pressure hydraulic and pneumatic systems. Made from chrome-plated CA360 brass with 3/4 in BSPT thread, 5/8 in length, and rated for 1,000 psi maximum operating pressure
AIGNEP USA
Solid plug for sealing threaded ports in high-pressure hydraulic and pneumatic systems. Made from chrome-plated CA360 brass with 3/4 in BSPT thread, 5/8 in length, and rated for 1,000 psi maximum operating pressure
Solid plug for sealing ports in hydraulic and pneumatic systems. Made of chrome-plated CA360 brass with 1/4 in BSPT thread, 1/2 in length, and rated for 1,000 psi maximum operating pressure
AIGNEP USA
Solid plug for sealing ports in hydraulic and pneumatic systems. Made of chrome-plated CA360 brass with 1/4 in BSPT thread, 1/2 in length, and rated for 1,000 psi maximum operating pressure
Solid plug for sealing threaded ports in high-pressure pneumatic or hydraulic systems. Made of chrome-plated CA360 brass with 1/8 in BSPT thread, rated to 1000 psi maximum operating pressure. Length is 5/16 in
AIGNEP USA
Solid plug for sealing threaded ports in high-pressure pneumatic or hydraulic systems. Made of chrome-plated CA360 brass with 1/8 in BSPT thread, rated to 1000 psi maximum operating pressure. Length is 5/16 in