AIMSAFETY Calibration Gas: Air, H2, 58 L Cylinder Capacity, Calibration Gas, CGA C10
The AIMSAFETY Calibration Gas: Air is a 58 L cylinder of calibration gas with a CGA C10 connection, containing a Hydrogen 500 ppm mixture in an air background. Designed for use with the PM100-H2 portable gas…
SKU 3G-OTH-551180
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The AIMSAFETY Calibration Gas: Air is a 58 L cylinder of calibration gas with a CGA C10 connection, containing a Hydrogen 500 ppm mixture in an air background. Designed for use with the PM100-H2 portable gas detector, this cylinder provides the specified gas mixture for routine sensor calibration.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the AIMSAFETY PM100-H2 Cal Gas used for?
This calibration gas is used to verify and adjust the accuracy of the AIMSAFETY PM100-H2 portable hydrogen gas detector. It contains 500 ppm hydrogen in an air background, delivered in a 58 L cylinder with a CGA C10 connection for routine sensor calibration in industrial safety applications.
What are the specifications of the AIMSAFETY calibration gas cylinder?
The AIMSAFETY calibration gas cylinder has a 58 L capacity, contains 500 ppm hydrogen in an air background, and uses a CGA C10 connection. It is designed for use with the PM100-H2 portable gas detector. The manufacturer part number is PM100-H2 Cal Gas.
Where to buy AIMSAFETY calibration gas for worldwide delivery?
3G Electric supplies the AIMSAFETY PM100-H2 Cal Gas cylinder for worldwide delivery. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to order this calibration gas for your hydrogen detector.
How to use the AIMSAFETY PM100-H2 calibration gas for sensor calibration?
Connect the CGA C10 cylinder to the PM100-H2 detector's calibration port. Follow the detector's manual to initiate calibration mode, then open the cylinder valve to expose the sensor to the 500 ppm hydrogen mixture. Allow the reading to stabilize before completing the calibration procedure.
AIMSAFETY Produk
3G Electric memasok AIMSAFETY calibration gases for portable gas detectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
