AIR SCIENCE Fume Hood Work Surface: 5 3/4 ft Overall Wd, 27 in Overall Lg, 1 in Thick
The AIR SCIENCE Fume Hood Work Surface (SKU 40TF42, MPN TRAY-P30) is a polypropylene work surface designed for use with the Purair 30 Ductless Fume Hood. It measures 5 3/4 ft overall width, 27 in overall length, and…
SKU 3G-OTH-364098
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The AIR SCIENCE Fume Hood Work Surface (SKU 40TF42, MPN TRAY-P30) is a polypropylene work surface designed for use with the Purair 30 Ductless Fume Hood. It measures 5 3/4 ft overall width, 27 in overall length, and 1 in thickness.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the AIR SCIENCE Fume Hood Work Surface used for?
The AIR SCIENCE Fume Hood Work Surface (MPN TRAY-P30) is a polypropylene tray designed for use with the Purair 30 Ductless Fume Hood. It provides a chemical-resistant, easy-to-clean work area for laboratory procedures requiring fume containment, such as sample preparation, solvent handling, and acid digestion.
What are the specifications of the AIR SCIENCE Fume Hood Work Surface?
The AIR SCIENCE Fume Hood Work Surface (SKU 40TF42) measures 5 3/4 ft overall width, 27 in overall length, and 1 in thickness. It is made of polypropylene and is designed specifically for the Purair 30 Ductless Fume Hood. The manufacturer part number is TRAY-P30.
Where to buy the AIR SCIENCE Fume Hood Work Surface worldwide?
3G Electric supplies the AIR SCIENCE Fume Hood Work Surface (MPN TRAY-P30) to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for a quote and lead time on this polypropylene work surface for the Purair 30 fume hood.
How to install the AIR SCIENCE Fume Hood Work Surface?
To install the AIR SCIENCE Fume Hood Work Surface (TRAY-P30), first ensure the Purair 30 Ductless Fume Hood is unplugged. Remove any existing work surface, then place the polypropylene tray into the hood's base, aligning it with the support edges. Secure it per the manufacturer's instructions. Always follow AIR SCIENCE's installation guide for proper fit and safety.
Digunakan dalam
Aplikasi umum untuk AIR SCIENCEAIR SCIENCE Produk
3G Electric memasok AIR SCIENCE fume hood work surfaces. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.













