Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ALLIED TUBE & CONDUIT 45° Elbow, 2 in, GRC, Galvanized Steel - 45° Elbows

ALLIED TUBE & CONDUIT 45° Elbow, 2 in, GRC, Galvanized Steel

ALLIED TUBE & CONDUIT 45° Elbow adalah siku pipa conduit galvanis berukuran 2 inci yang dirancang untuk sistem pengkabelan listrik industri. Terbuat dari baja galvanis dengan panjang keseluruhan 16 inci, fitting ini…

SKU 3G-OTH-806263

Merek
ALLIED TUBE & CONDUIT
Item
45° Elbow, 2 in, GRC, Galvanized Steel
Kategori
45° Elbows
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ALLIED TUBE & CONDUIT
Manufacturer Part Number
876786
Type
2 in., Steel, Galvanized
Material
Galvanized Steel
Overall Lg
16 in
GRC
45°
Item
45 Degree Elbow
Degree
45
Standards
Sec 250.118 NEC
Trade Size
2 in
For Conduit Type
GRC
Conduit Fitting Type
Elbow
Compatible Conduit Type
GRC Conduit
Compatible Conduit Trade Size
2 in

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ALLIED TUBE & CONDUIT Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ALLIED TUBE & CONDUIT 45° Elbow adalah siku pipa conduit galvanis berukuran 2 inci yang dirancang untuk sistem pengkabelan listrik industri. Terbuat dari baja galvanis dengan panjang keseluruhan 16 inci, fitting ini memenuhi standar NEC Section 250.118 dan kompatibel dengan GRC Conduit. Produk ini ideal untuk instalasi pembakar industri dan peralatan pembakaran yang memerlukan perlindungan kabel yang kokoh.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa ALLIED TUBE & CONDUIT 45° Elbow digunakan?

Elbow 45° ini digunakan untuk membelokkan jalur pipa conduit GRC (Galvanized Rigid Conduit) pada sudut 45 derajat dalam instalasi listrik industri. Cocok untuk melindungi kabel pada sistem pembakar industri dan peralatan pembakaran.

Apa spesifikasi ALLIED TUBE & CONDUIT 45° Elbow?

Spesifikasi: Trade Size 2 inci, material baja galvanis, sudut 45 derajat, panjang keseluruhan 16 inci, tipe GRC (Galvanized Rigid Conduit), memenuhi standar NEC Section 250.118, nomor part 876786.

Di mana beli ALLIED TUBE & CONDUIT 45° Elbow di Indonesia?

Anda dapat membeli produk ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih ALLIED TUBE & CONDUIT 45° Elbow yang tepat?

Pastikan Anda memilih trade size yang sesuai dengan conduit GRC yang digunakan, yaitu 2 inci. Periksa juga kompatibilitas dengan tipe conduit GRC dan standar NEC yang berlaku. Produk ini tersedia dalam ukuran 2 inci dengan sudut 45 derajat.

Digunakan dalam

Aplikasi umum untuk ALLIED TUBE & CONDUIT
Industrial electrical raceway — Allied Tube & Conduit threaded couplings for GRC conduit in manufacturing plants
Commercial building wiring — Allied Tube & Conduit running threads for conduit nipples in electrical rooms
Infrastructure projects — Allied Tube & Conduit aluminum couplings for RMC conduit in corrosive environments
Maintenance and retrofits — Allied Tube & Conduit steel couplings for replacing damaged conduit sections
Utility substations — Allied Tube & Conduit running threads for grounding electrode conductor connections

ALLIED TUBE & CONDUIT Produk

3G Electric memasok ALLIED TUBE & CONDUIT 45° elbows. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari ALLIED TUBE & CONDUIT

Lihat semua ALLIED TUBE & CONDUIT suku cadang →
Galvanized steel 45° elbow for GRC and IMC conduit systems. Trade size 1/2 in, overall length 8 in. UL listed. Used to change conduit direction by 45 degrees in electrical raceway installations
ALLIED TUBE & CONDUIT
Galvanized steel 45° elbow for GRC and IMC conduit systems. Trade size 1/2 in, overall length 8 in. UL listed. Used to change conduit direction by 45 degrees in electrical raceway installations
This 45° elbow is a galvanized steel conduit fitting with a 1-1/4 in trade size and 11 in overall length. It is UL listed and compatible with GRC and IMC conduit systems. Used to change the direction of conduit runs in electrical installations where a 45-degree turn is required
ALLIED TUBE & CONDUIT
This 45° elbow is a galvanized steel conduit fitting with a 1-1/4 in trade size and 11 in overall length. It is UL listed and compatible with GRC and IMC conduit systems. Used to change the direction of conduit runs in electrical installations where a 45-degree turn is required
This 45° aluminum elbow is used to change the direction of rigid metal conduit (RMC) runs. It has a 1 in trade size, 9 3/32 in overall length, and NPT threads. Complies with UL 6A and ANSI C80.5 standards
ALLIED TUBE & CONDUIT
This 45° aluminum elbow is used to change the direction of rigid metal conduit (RMC) runs. It has a 1 in trade size, 9 3/32 in overall length, and NPT threads. Complies with UL 6A and ANSI C80.5 standards
This 45-degree elbow is a galvanized steel conduit fitting with a 6-inch trade size and 45-inch overall length. It is UL listed and designed for use with GRC conduit, also compatible with 6-inch IMC. Used to provide a 45-degree directional change in rigid conduit runs for electrical installations
ALLIED TUBE & CONDUIT
This 45-degree elbow is a galvanized steel conduit fitting with a 6-inch trade size and 45-inch overall length. It is UL listed and designed for use with GRC conduit, also compatible with 6-inch IMC. Used to provide a 45-degree directional change in rigid conduit runs for electrical installations
45° aluminum elbow for rigid metal conduit (RMC) with 1-1/2 in trade size and NPT threads. Plain finish, overall length 14 5/32 in. Complies with UL 6A and ANSI C80.5 standards. Used to change conduit direction in electrical raceway systems
ALLIED TUBE & CONDUIT
45° aluminum elbow for rigid metal conduit (RMC) with 1-1/2 in trade size and NPT threads. Plain finish, overall length 14 5/32 in. Complies with UL 6A and ANSI C80.5 standards. Used to change conduit direction in electrical raceway systems
This 45° aluminum elbow is used to change the direction of rigid metal conduit (RMC) runs in electrical installations. It has a 3/4 in trade size, NPT threads, and an overall length of 8 1/2 in. Complies with UL 6A and ANSI C80.5 standards
ALLIED TUBE & CONDUIT
This 45° aluminum elbow is used to change the direction of rigid metal conduit (RMC) runs in electrical installations. It has a 3/4 in trade size, NPT threads, and an overall length of 8 1/2 in. Complies with UL 6A and ANSI C80.5 standards
This 45° elbow is a galvanized steel conduit fitting for GRC and IMC systems with a 3-1/2 in trade size and 25 in overall length. It is UL listed and used to change the direction of electrical raceways in conduit runs
ALLIED TUBE & CONDUIT
This 45° elbow is a galvanized steel conduit fitting for GRC and IMC systems with a 3-1/2 in trade size and 25 in overall length. It is UL listed and used to change the direction of electrical raceways in conduit runs
This 45° aluminum elbow is used to change the direction of rigid metal conduit (RMC) runs in electrical installations. It has a 3 in trade size, NPT threads, and an overall length of 22 11/16 in. Complies with UL 6A and ANSI C80.5 standards. Supplied plain
ALLIED TUBE & CONDUIT
This 45° aluminum elbow is used to change the direction of rigid metal conduit (RMC) runs in electrical installations. It has a 3 in trade size, NPT threads, and an overall length of 22 11/16 in. Complies with UL 6A and ANSI C80.5 standards. Supplied plain