Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL 90° Threaded Pipe Elbow, 1 1/4 in x 3/4 in, Class 125 - Low-Pressure Threaded Pipe Fittings
ANVILLow-Pressure Threaded Pipe Fittings

ANVIL 90° Threaded Pipe Elbow, 1 1/4 in x 3/4 in, Class 125

ANVIL Metal Pipe Elbow adalah sambungan pipa ulir bertekanan rendah dengan konfigurasi 90° dan ukuran 1 1/4 in x 3/4 in. Produk ini dirancang untuk aplikasi perpipaan industri yang membutuhkan ketahanan tekanan…

SKU 3G-OTH-654005

Merek
ANVIL
Item
90° Threaded Pipe Elbow, 1 1/4 in x 3/4 in, Class 125
Kategori
Low-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0300013000
Type
Threaded x Threaded, Class 125, 175 psi @ 150° F
Elbow
90°
Maximum Operating Pressure
175 psi @ 150° F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ANVIL Metal Pipe Elbow adalah sambungan pipa ulir bertekanan rendah dengan konfigurasi 90° dan ukuran 1 1/4 in x 3/4 in. Produk ini dirancang untuk aplikasi perpipaan industri yang membutuhkan ketahanan tekanan hingga 175 psi pada suhu 150° F, sesuai standar Class 125. Sebagai komponen peralatan industri yang andal, elbow ini cocok digunakan dalam sistem perpipaan air, uap, atau gas bertekanan rendah di berbagai sektor seperti pabrik kelapa sawit dan industri pengolahan.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi ANVIL Metal Pipe Elbow 1 1/4 in x 3/4 in?

Spesifikasi produk ini meliputi tipe ulir ganda (Threaded x Threaded), sudut 90°, kelas Class 125, tekanan operasi maksimum 175 psi pada suhu 150° F, dan nomor part pabrikan 0300013000.

Untuk apa ANVIL Metal Pipe Elbow 1 1/4 in x 3/4 in digunakan?

Elbow ini digunakan untuk mengubah arah aliran pipa sebesar 90° pada sistem perpipaan bertekanan rendah, seperti instalasi air, uap, atau gas di lingkungan industri. Cocok untuk aplikasi yang memerlukan sambungan ulir dengan tekanan maksimum 175 psi.

Di mana beli ANVIL Metal Pipe Elbow 1 1/4 in x 3/4 in di Indonesia?

Anda dapat membeli ANVIL Metal Pipe Elbow 1 1/4 in x 3/4 in melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah.

Bagaimana cara memilih ANVIL Metal Pipe Elbow yang tepat?

Pilih elbow berdasarkan ukuran pipa yang akan disambung, tekanan operasi, dan suhu lingkungan. Produk ini memiliki ukuran 1 1/4 in x 3/4 in, tekanan maksimum 175 psi pada 150° F, dan kelas Class 125. Pastikan sesuai dengan kebutuhan sistem perpipaan Anda.

ANVIL Produk

3G Electric memasok ANVIL low-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
Threaded x Threaded x Threaded, Class 125, cast iron. Maximum operating pressure 175 psi @ -20° to 150°F. Used to connect three threaded pipes in low-pressure water or air lines
ANVIL
Threaded x Threaded x Threaded, Class 125, cast iron. Maximum operating pressure 175 psi @ -20° to 150°F. Used to connect three threaded pipes in low-pressure water or air lines
Threaded x Threaded 90° elbow for low-pressure piping systems. Rated Class 125 with maximum operating pressure 175 psi at 150° F. Used to change direction in water, air, or steam lines
ANVIL
Threaded x Threaded 90° elbow for low-pressure piping systems. Rated Class 125 with maximum operating pressure 175 psi at 150° F. Used to change direction in water, air, or steam lines
This threaded plug is used to seal open ends in low-pressure piping systems, such as water, air, or steam lines. It is commonly applied in industrial plumbing, HVAC, and process piping to cap unused ports or close pipe ends during maintenance or system modifications. Constructed from malleable iron with NPT threads, it is rated for a maximum operating pressure of 285 psi
ANVIL
This threaded plug is used to seal open ends in low-pressure piping systems, such as water, air, or steam lines. It is commonly applied in industrial plumbing, HVAC, and process piping to cap unused ports or close pipe ends during maintenance or system modifications. Constructed from malleable iron with NPT threads, it is rated for a maximum operating pressure of 285 psi
Threaded x Threaded x Threaded pipe tee with 1 1/4 in x 1 1/4 in x 1/2 in configuration. Class 125 cast iron construction rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or steam piping systems
ANVIL
Threaded x Threaded x Threaded pipe tee with 1 1/4 in x 1 1/4 in x 1/2 in configuration. Class 125 cast iron construction rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or steam piping systems
Low-pressure threaded pipe tee with reducing branch, cast iron construction, Class 125. Threaded x threaded x threaded connections for use in water, steam, or gas piping systems. Maximum operating pressure 175 psi at -20° to 150°F
ANVIL
Low-pressure threaded pipe tee with reducing branch, cast iron construction, Class 125. Threaded x threaded x threaded connections for use in water, steam, or gas piping systems. Maximum operating pressure 175 psi at -20° to 150°F
This ANVIL pipe tee is a Class 125 cast iron fitting with threaded x threaded x threaded connections. It measures 2 1/2 in x 2 in x 3/4 in and has a maximum operating pressure of 175 psi @ -20° to 150°F. Used to branch or combine flow in low-pressure piping systems such as water, air, or steam lines
ANVIL
This ANVIL pipe tee is a Class 125 cast iron fitting with threaded x threaded x threaded connections. It measures 2 1/2 in x 2 in x 3/4 in and has a maximum operating pressure of 175 psi @ -20° to 150°F. Used to branch or combine flow in low-pressure piping systems such as water, air, or steam lines
Threaded x Threaded x Threaded Class 125 cast iron tee for low-pressure piping systems. Maximum operating pressure 175 psi at -20° to 150°F. Used to branch or combine flow in water, air, and non-corrosive fluid lines
ANVIL
Threaded x Threaded x Threaded Class 125 cast iron tee for low-pressure piping systems. Maximum operating pressure 175 psi at -20° to 150°F. Used to branch or combine flow in water, air, and non-corrosive fluid lines
Threaded pipe tee with 2 in x 1 in x 1 in connections, Class 125 cast iron construction. Rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or non-corrosive fluid piping systems
ANVIL
Threaded pipe tee with 2 in x 1 in x 1 in connections, Class 125 cast iron construction. Rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or non-corrosive fluid piping systems