Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Siku Pipa Logam: 2 in x 1 1/2 in, Berulir x Berulir, Kelas 125, 175 psi @ 150° F - Low-Pressure Threaded Pipe Fittings
ANVILLow-Pressure Threaded Pipe Fittings

ANVIL Siku Pipa Logam: 2 in x 1 1/2 in, Berulir x Berulir, Kelas 125, 175 psi @ 150° F

ANVIL Metal Pipe Elbow adalah sambungan pipa ulir bertekanan rendah dengan konfigurasi 90° dan ukuran 2 in x 1 1/2 in. Fitting ini dirancang untuk aplikasi perpipaan industri dengan tekanan operasi maksimum 175 psi…

SKU 3G-OTH-653850

Merek
ANVIL
Item
Siku Pipa Logam: 2 in x 1 1/2 in, Berulir x Berulir, Kelas 125, 175 psi @ 150° F
Kategori
Low-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0300014206
Type
Threaded x Threaded, Class 125, 175 psi @ 150° F
Elbow
90°
Maximum Operating Pressure
175 psi @ 150° F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ANVIL Metal Pipe Elbow adalah sambungan pipa ulir bertekanan rendah dengan konfigurasi 90° dan ukuran 2 in x 1 1/2 in. Fitting ini dirancang untuk aplikasi perpipaan industri dengan tekanan operasi maksimum 175 psi pada suhu 150° F, sesuai standar Class 125. Produk ini cocok digunakan sebagai komponen dalam sistem perpipaan yang memerlukan perubahan arah aliran fluida secara presisi.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi ANVIL Metal Pipe Elbow 2 in x 1 1/2 in?

ANVIL Metal Pipe Elbow ini memiliki tipe ulir x ulir, sudut 90°, dan tekanan operasi maksimum 175 psi pada suhu 150° F. Ukuran fitting adalah 2 in x 1 1/2 in dengan klasifikasi Class 125. Produk ini cocok untuk sistem perpipaan bertekanan rendah.

Untuk apa ANVIL Metal Pipe Elbow 2 in x 1 1/2 in digunakan?

Fitting ini digunakan untuk mengubah arah aliran fluida dalam sistem perpipaan industri, seperti pada instalasi air, uap, atau gas bertekanan rendah. Dengan konfigurasi 90°, sambungan ini memungkinkan belokan tajam pada jalur pipa tanpa mengurangi integritas tekanan.

Di mana beli ANVIL Metal Pipe Elbow 2 in x 1 1/2 in di Indonesia?

Anda dapat membeli ANVIL Metal Pipe Elbow ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah. Hubungi kami untuk informasi lebih lanjut.

Bagaimana cara memilih ANVIL Metal Pipe Elbow yang tepat?

Pilih fitting berdasarkan ukuran pipa yang akan disambung, tekanan operasi, dan suhu sistem. Untuk ANVIL Metal Pipe Elbow ini, pastikan tekanan tidak melebihi 175 psi pada suhu 150° F. Gunakan ukuran 2 in x 1 1/2 in sesuai kebutuhan diameter pipa Anda.

ANVIL Produk

3G Electric memasok ANVIL low-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Low-pressure threaded pipe fitting with 90° elbow configuration. Threaded x threaded connections. Class 125 rating, maximum operating pressure 175 psi at 150°F. Used to change direction in piping systems for water, air, or steam lines
ANVIL
Low-pressure threaded pipe fitting with 90° elbow configuration. Threaded x threaded connections. Class 125 rating, maximum operating pressure 175 psi at 150°F. Used to change direction in piping systems for water, air, or steam lines
This low-pressure threaded pipe elbow features a 45° angle for gradual directional changes in piping systems. With Threaded x Threaded connections and Class 125 rating, it is suitable for applications requiring a maximum operating pressure of 175 psi at 150°F
ANVIL
This low-pressure threaded pipe elbow features a 45° angle for gradual directional changes in piping systems. With Threaded x Threaded connections and Class 125 rating, it is suitable for applications requiring a maximum operating pressure of 175 psi at 150°F
This 45° low-pressure threaded pipe fitting features threaded x threaded connections and is rated Class 125 with a maximum operating pressure of 175 psi at 150°F. It is used to change flow direction in piping systems for water, air, or other non-corrosive media
ANVIL
This 45° low-pressure threaded pipe fitting features threaded x threaded connections and is rated Class 125 with a maximum operating pressure of 175 psi at 150°F. It is used to change flow direction in piping systems for water, air, or other non-corrosive media
Threaded x Threaded straight pipe fitting, Class 125, rated for 175 psi at 150°F. Connects pipes of different diameters in low-pressure water, air, or steam lines
ANVIL
Threaded x Threaded straight pipe fitting, Class 125, rated for 175 psi at 150°F. Connects pipes of different diameters in low-pressure water, air, or steam lines
Threaded x threaded Class 125 low-pressure pipe fitting with straight configuration. Maximum operating pressure 175 psi at 150°F. Used to connect pipes of different diameters in plumbing, HVAC, and process systems handling water, air, or non-corrosive fluids
ANVIL
Threaded x threaded Class 125 low-pressure pipe fitting with straight configuration. Maximum operating pressure 175 psi at 150°F. Used to connect pipes of different diameters in plumbing, HVAC, and process systems handling water, air, or non-corrosive fluids
Threaded x Threaded straight reducer pipe fitting, Class 125, rated for 175 psi at 150°F. Connects 1 1/2 in to 1 1/4 in pipe sizes. Used in low-pressure plumbing, HVAC, and process piping systems for fluid or gas transfer
ANVIL
Threaded x Threaded straight reducer pipe fitting, Class 125, rated for 175 psi at 150°F. Connects 1 1/2 in to 1 1/4 in pipe sizes. Used in low-pressure plumbing, HVAC, and process piping systems for fluid or gas transfer

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
Threaded pipe tee with 1 1/4 in x 1 in x 1 1/2 in connections, Class 125 cast iron construction. Rated for 175 psi at -20° to 150°F. Used to split or combine flow in low-pressure water, air, or steam piping systems
ANVIL
Threaded pipe tee with 1 1/4 in x 1 in x 1 1/2 in connections, Class 125 cast iron construction. Rated for 175 psi at -20° to 150°F. Used to split or combine flow in low-pressure water, air, or steam piping systems
Threaded x Threaded x Threaded cast iron tee for low-pressure piping systems. Rated for 175 psi at -20° to 150°F. Used to branch or combine flow in water, air, or steam lines in industrial, HVAC, and plumbing applications
ANVIL
Threaded x Threaded x Threaded cast iron tee for low-pressure piping systems. Rated for 175 psi at -20° to 150°F. Used to branch or combine flow in water, air, or steam lines in industrial, HVAC, and plumbing applications
This cast iron pipe tee features a threaded x threaded x threaded configuration for low-pressure applications. Rated Class 125 with a maximum operating pressure of 175 psi at -20° to 150°F, it is suitable for branching or combining flow in water, air, or steam lines. The 2-1/2 x 2-1/2 x 3/4 in size allows quick assembly without welding in maintenance and repair settings
ANVIL
This cast iron pipe tee features a threaded x threaded x threaded configuration for low-pressure applications. Rated Class 125 with a maximum operating pressure of 175 psi at -20° to 150°F, it is suitable for branching or combining flow in water, air, or steam lines. The 2-1/2 x 2-1/2 x 3/4 in size allows quick assembly without welding in maintenance and repair settings
Threaded x Threaded x Threaded, Class 125, cast iron pipe tee. Maximum operating pressure 175 psi at -20° to 150°F. Used in low-pressure plumbing and industrial piping systems for splitting or combining flow in water, air, and steam lines
ANVIL
Threaded x Threaded x Threaded, Class 125, cast iron pipe tee. Maximum operating pressure 175 psi at -20° to 150°F. Used in low-pressure plumbing and industrial piping systems for splitting or combining flow in water, air, and steam lines
This 90° elbow connects pipes of different diameters in low-pressure plumbing, HVAC, or industrial piping systems. It features threaded x threaded connections, Class 125 rating, and maximum operating pressure of 175 psi at 150°F. Suitable for water, air, or non-corrosive fluid lines
ANVIL
This 90° elbow connects pipes of different diameters in low-pressure plumbing, HVAC, or industrial piping systems. It features threaded x threaded connections, Class 125 rating, and maximum operating pressure of 175 psi at 150°F. Suitable for water, air, or non-corrosive fluid lines
Cast iron Class 125 threaded pipe tee with three female threaded ends (1 1/2 in x 1 1/4 in x 1 1/2 in). Rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, steam, or gas piping systems
ANVIL
Cast iron Class 125 threaded pipe tee with three female threaded ends (1 1/2 in x 1 1/4 in x 1 1/2 in). Rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, steam, or gas piping systems
Threaded pipe tee with 2 in x 1 1/4 in x 1 1/2 in reducing configuration. Constructed of Class 125 cast iron with threaded x threaded x threaded ends. Rated for maximum 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, steam, or gas piping systems
ANVIL
Threaded pipe tee with 2 in x 1 1/4 in x 1 1/2 in reducing configuration. Constructed of Class 125 cast iron with threaded x threaded x threaded ends. Rated for maximum 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, steam, or gas piping systems
This 90° elbow connects 2 1/2 in and 1 in pipes in low-pressure threaded piping systems. Threaded x Threaded connections. Class 125 rating, maximum operating pressure 175 psi at 150°F. Suitable for water, air, or steam lines
ANVIL
This 90° elbow connects 2 1/2 in and 1 in pipes in low-pressure threaded piping systems. Threaded x Threaded connections. Class 125 rating, maximum operating pressure 175 psi at 150°F. Suitable for water, air, or steam lines