Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Metal Pipe Straight 6 in x 5 in - Low-Pressure Flanged Pipe Fittings
ANVILLow-Pressure Flanged Pipe Fittings

ANVIL Metal Pipe Straight 6 in x 5 in

ANVIL Metal Pipe Straight 6 in x 5 in adalah fitting pipa bertekanan rendah tipe flens ke flens yang dirancang untuk sistem perpipaan industri. Dengan spesifikasi Class 125 dan tekanan operasi maksimum 175 psi pada…

SKU 3G-OTH-649489

Merek
ANVIL
Item
Metal Pipe Straight 6 in x 5 in
Kategori
Low-Pressure Flanged Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0306060401
Type
Flange x Flange, Class 125, 175 psi @ 150° F, Flange, Cast Iron
Maximum Operating Pressure
175 psi @ 150° F
(DO NOT SEND) Manufacturer Location
Globally Sourced

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ANVIL Metal Pipe Straight 6 in x 5 in adalah fitting pipa bertekanan rendah tipe flens ke flens yang dirancang untuk sistem perpipaan industri. Dengan spesifikasi Class 125 dan tekanan operasi maksimum 175 psi pada suhu 150° F, produk ini terbuat dari besi cor (cast iron) yang kokoh. Cocok digunakan sebagai sambungan lurus pada instalasi perpipaan uap, air, atau minyak di pabrik kelapa sawit, pabrik semen, dan sektor maritim di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi ANVIL Metal Pipe Straight 6 in x 5 in?

ANVIL Metal Pipe Straight 6 in x 5 in memiliki tipe Flange x Flange, Class 125, dengan tekanan operasi maksimum 175 psi pada suhu 150° F. Materialnya adalah besi cor (cast iron) dan nomor part pabrikan adalah 0306060401.

Untuk apa ANVIL Metal Pipe Straight 6 in x 5 in digunakan?

Fitting ini digunakan sebagai sambungan lurus pada sistem perpipaan bertekanan rendah, seperti instalasi uap, air, atau minyak di lingkungan industri. Desain flens ke flens memudahkan pemasangan dan perawatan pada jalur pipa.

Di mana beli ANVIL Metal Pipe Straight 6 in x 5 in di Indonesia?

Anda dapat membeli ANVIL Metal Pipe Straight 6 in x 5 in melalui 3G Electric, distributor resmi yang melayani pengiriman ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga produk tiba dengan aman di lokasi proyek Anda.

Bagaimana cara memilih ANVIL Metal Pipe Straight yang tepat?

Pastikan ukuran (6 in x 5 in), kelas tekanan (Class 125, 175 psi @ 150° F), dan tipe sambungan (flange x flange) sesuai dengan kebutuhan sistem perpipaan Anda. Material cast iron cocok untuk aplikasi tekanan rendah dengan suhu operasi maksimum 150° F.

ANVIL Produk

3G Electric memasok ANVIL low-pressure flanged pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
This low-pressure flanged pipe fitting is a reducer with flange x flange connections, made of cast iron. Rated Class 125, it has a maximum operating pressure of 175 psi at 150°F. Used in industrial piping systems to connect pipes of different diameters in water, steam, or gas lines
ANVIL
This low-pressure flanged pipe fitting is a reducer with flange x flange connections, made of cast iron. Rated Class 125, it has a maximum operating pressure of 175 psi at 150°F. Used in industrial piping systems to connect pipes of different diameters in water, steam, or gas lines
This straight flanged pipe fitting connects pipes in straight runs where a change in diameter is needed. It is a Flange x Flange, Class 125 fitting with a maximum operating pressure of 175 psi at 150°F. Suitable for low-pressure industrial plumbing, HVAC, and process piping systems
ANVIL
This straight flanged pipe fitting connects pipes in straight runs where a change in diameter is needed. It is a Flange x Flange, Class 125 fitting with a maximum operating pressure of 175 psi at 150°F. Suitable for low-pressure industrial plumbing, HVAC, and process piping systems
This 90° elbow connects flanged pipes of different sizes, reducing from 6-inch to 4-inch. Made of cast iron, it is rated for Class 125 and a maximum operating pressure of 175 psi at 150°F. Suitable for low-pressure water, steam, or gas lines requiring a directional change and size transition
ANVIL
This 90° elbow connects flanged pipes of different sizes, reducing from 6-inch to 4-inch. Made of cast iron, it is rated for Class 125 and a maximum operating pressure of 175 psi at 150°F. Suitable for low-pressure water, steam, or gas lines requiring a directional change and size transition
Low-pressure flanged pipe fitting with Flange x Flange connections, Class 125, straight configuration. Rated for maximum operating pressure of 175 psi at 150°F. Used to connect pipes in straight runs within plumbing, HVAC, and process systems for water, steam, or gas lines
ANVIL
Low-pressure flanged pipe fitting with Flange x Flange connections, Class 125, straight configuration. Rated for maximum operating pressure of 175 psi at 150°F. Used to connect pipes in straight runs within plumbing, HVAC, and process systems for water, steam, or gas lines
This 45° elbow connects flanged pipes in low-pressure systems. It is cast iron, Class 125, with a maximum operating pressure of 175 psi at 150 °F. Typical applications include water, steam, and gas lines in industrial plumbing and HVAC
ANVIL
This 45° elbow connects flanged pipes in low-pressure systems. It is cast iron, Class 125, with a maximum operating pressure of 175 psi at 150 °F. Typical applications include water, steam, and gas lines in industrial plumbing and HVAC
Cast iron 90° elbow with flange x threaded connections, Class 125, rated for 175 psi at 150°F. Used in low-pressure piping systems to change direction, suitable for water, steam, or gas applications
ANVIL
Cast iron 90° elbow with flange x threaded connections, Class 125, rated for 175 psi at 150°F. Used in low-pressure piping systems to change direction, suitable for water, steam, or gas applications
This flanged pipe tee features a 2 in x 2 in x 2 in configuration with Flange x Flange x Flange connections. Rated Class 125, it has a maximum operating pressure of 175 psi at -20° to 150°F. Used in low-pressure piping systems to split or combine flow in applications such as water, steam, or gas lines
ANVIL
This flanged pipe tee features a 2 in x 2 in x 2 in configuration with Flange x Flange x Flange connections. Rated Class 125, it has a maximum operating pressure of 175 psi at -20° to 150°F. Used in low-pressure piping systems to split or combine flow in applications such as water, steam, or gas lines
This 45° elbow is a low-pressure flanged pipe fitting with flange x flange connections. Rated Class 125, it has a maximum operating pressure of 175 psi at 150° F. Used to change flow direction in piping systems for water, steam, or air lines
ANVIL
This 45° elbow is a low-pressure flanged pipe fitting with flange x flange connections. Rated Class 125, it has a maximum operating pressure of 175 psi at 150° F. Used to change flow direction in piping systems for water, steam, or air lines