Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Medium-Pressure Threaded Pipe Tee, 2 in x 1/2 in x 2 in, Class 150 - Medium-Pressure Threaded Pipe Fittings
ANVILMedium-Pressure Threaded Pipe Fittings

ANVIL Medium-Pressure Threaded Pipe Tee, 2 in x 1/2 in x 2 in, Class 150

Tee pipa logam dari ANVIL ini adalah fitting pipa berulir kelas menengah yang dirancang untuk sistem perpipaan industri. Dengan spesifikasi Class 150 dan tekanan operasi maksimum 300 psi pada suhu 150°F, produk ini…

SKU 3G-OTH-654447

Merek
ANVIL
Item
Medium-Pressure Threaded Pipe Tee, 2 in x 1/2 in x 2 in, Class 150
Kategori
Medium-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0310051602
Type
Threaded x Threaded x Threaded, Class 150, 300 psi @ 150°F
Maximum Operating Pressure
300 psi @ 150°F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Tee pipa logam dari ANVIL ini adalah fitting pipa berulir kelas menengah yang dirancang untuk sistem perpipaan industri. Dengan spesifikasi Class 150 dan tekanan operasi maksimum 300 psi pada suhu 150°F, produk ini memiliki konfigurasi ulir x ulir x ulir dengan ukuran 2 in x 1/2 in x 2 in. Cocok digunakan sebagai sambungan tee pada instalasi pipa bertekanan, fitting ini merupakan pilihan andal untuk aplikasi perpipaan di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi tee pipa ANVIL 2 in x 1/2 in x 2 in?

Tee pipa ANVIL ini memiliki tipe Threaded x Threaded x Threaded, Class 150, dengan tekanan operasi maksimum 300 psi pada suhu 150°F. Nomor komponennya adalah 0310051602.

Untuk apa tee pipa ANVIL 2 in x 1/2 in x 2 in digunakan?

Tee pipa ini digunakan sebagai sambungan tee pada sistem perpipaan bertekanan, khususnya untuk aplikasi industri yang memerlukan fitting berulir Class 150. Cocok untuk instalasi pipa dengan tekanan hingga 300 psi pada suhu 150°F.

Di mana beli tee pipa ANVIL 2 in x 1/2 in x 2 in di Indonesia?

Anda dapat membeli tee pipa ANVIL ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih tee pipa ANVIL yang tepat?

Pilih tee pipa ANVIL berdasarkan ukuran dan kelas tekanan yang sesuai dengan sistem Anda. Produk ini memiliki ukuran 2 in x 1/2 in x 2 in dengan Class 150 dan tekanan maksimum 300 psi pada suhu 150°F, cocok untuk aplikasi perpipaan bertekanan menengah.

ANVIL Produk

3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
This 45° elbow is a medium-pressure threaded pipe fitting made of malleable iron. Rated for 300 psi at 150°F, it has 3/4-inch female NPT connections on both ends. Used in steam, water, gas, and oil lines to redirect flow at a 45-degree angle in industrial and commercial piping systems
ANVIL
This 45° elbow is a medium-pressure threaded pipe fitting made of malleable iron. Rated for 300 psi at 150°F, it has 3/4-inch female NPT connections on both ends. Used in steam, water, gas, and oil lines to redirect flow at a 45-degree angle in industrial and commercial piping systems
This 90° elbow fitting connects threaded pipes of different sizes (1 in x 3/4 in) to change flow direction in medium-pressure piping systems. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F, it is suitable for steam, water, or gas lines requiring secure, leak-resistant joints
ANVIL
This 90° elbow fitting connects threaded pipes of different sizes (1 in x 3/4 in) to change flow direction in medium-pressure piping systems. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F, it is suitable for steam, water, or gas lines requiring secure, leak-resistant joints
Threaded x Threaded, Class 150 straight pipe fitting for medium-pressure applications. Connects 1 1/2 in to 1/2 in pipe sizes. Maximum operating pressure 300 psi at 150° F. Used in industrial plumbing, HVAC, and process piping systems
ANVIL
Threaded x Threaded, Class 150 straight pipe fitting for medium-pressure applications. Connects 1 1/2 in to 1/2 in pipe sizes. Maximum operating pressure 300 psi at 150° F. Used in industrial plumbing, HVAC, and process piping systems
Medium-pressure threaded pipe fitting for connecting or redirecting piping in industrial systems. Made of malleable iron, rated for 300 psi at 150°F. Suitable for steam, water, or air lines
ANVIL
Medium-pressure threaded pipe fitting for connecting or redirecting piping in industrial systems. Made of malleable iron, rated for 300 psi at 150°F. Suitable for steam, water, or air lines
This 45° threaded elbow connects two pipes at a 45-degree angle in medium-pressure piping systems. It features a threaded x threaded connection, Class 150 rating, and a maximum operating pressure of 300 psi at 150°F. Suitable for use in industrial plumbing, HVAC, and process lines
ANVIL
This 45° threaded elbow connects two pipes at a 45-degree angle in medium-pressure piping systems. It features a threaded x threaded connection, Class 150 rating, and a maximum operating pressure of 300 psi at 150°F. Suitable for use in industrial plumbing, HVAC, and process lines
Threaded x Threaded straight pipe fitting, Class 150, rated for 300 psi at 150°F. Connects 2-inch to 1-inch pipe sizes. Suitable for medium-pressure industrial piping systems such as water, oil, or gas lines
ANVIL
Threaded x Threaded straight pipe fitting, Class 150, rated for 300 psi at 150°F. Connects 2-inch to 1-inch pipe sizes. Suitable for medium-pressure industrial piping systems such as water, oil, or gas lines
This medium-pressure threaded pipe tee features a run x run x branch configuration with 3-inch main line and 3/4-inch branch outlet. Rated for 300 psi at 150°F, it is suitable for industrial piping systems requiring a durable threaded branch connection
ANVIL
This medium-pressure threaded pipe tee features a run x run x branch configuration with 3-inch main line and 3/4-inch branch outlet. Rated for 300 psi at 150°F, it is suitable for industrial piping systems requiring a durable threaded branch connection
Medium-pressure threaded pipe fitting, 90° elbow with threaded x threaded connections. Rated Class 150, maximum operating pressure 300 psi at 150°F. Used to change piping direction in industrial plumbing, HVAC, and process lines
ANVIL
Medium-pressure threaded pipe fitting, 90° elbow with threaded x threaded connections. Rated Class 150, maximum operating pressure 300 psi at 150°F. Used to change piping direction in industrial plumbing, HVAC, and process lines