Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Waste Nut, 3/4 in, Threaded, Class 150, Malleable Iron - Low-Pressure Threaded Pipe Fittings
ANVILLow-Pressure Threaded Pipe Fittings

ANVIL Waste Nut, 3/4 in, Threaded, Class 150, Malleable Iron

Waste Nut ANVIL berukuran 3/4 in dengan sambungan ulir (Threaded) dan kelas tekanan Class 150. Terbuat dari besi tempa (Malleable Iron), fitting pipa bertekanan rendah ini merupakan komponen penting dalam sistem…

SKU 3G-OTH-654112

Merek
ANVIL
Item
Waste Nut, 3/4 in, Threaded, Class 150, Malleable Iron
Kategori
Low-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0310103205
Type
Threaded, Class 150, Nut, Malleable Iron
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Waste Nut ANVIL berukuran 3/4 in dengan sambungan ulir (Threaded) dan kelas tekanan Class 150. Terbuat dari besi tempa (Malleable Iron), fitting pipa bertekanan rendah ini merupakan komponen penting dalam sistem perpipaan industri untuk menyambung pipa atau komponen lain dengan aman. Sebagai distributor resmi, 3G Electric menyediakan Waste Nut ANVIL untuk kebutuhan peralatan industri Anda di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa Waste Nut ANVIL 3/4 in digunakan?

Waste Nut ANVIL 3/4 in, Threaded, Class 150, Malleable Iron digunakan sebagai mur pengunci pada sambungan pipa bertekanan rendah. Fitting ini berfungsi mengamankan sambungan ulir pada sistem perpipaan industri, seperti pada instalasi air atau bahan bakar.

Apa spesifikasi Waste Nut ANVIL 0310103205?

Spesifikasi Waste Nut ANVIL 0310103205 meliputi: ukuran 3/4 in, tipe sambungan ulir (Threaded), kelas tekanan Class 150, dan material Malleable Iron. Produk ini diproduksi oleh ANVIL dan cocok untuk aplikasi perpipaan bertekanan rendah.

Di mana beli Waste Nut ANVIL di Indonesia?

Anda dapat membeli Waste Nut ANVIL 3/4 in, Threaded, Class 150, Malleable Iron melalui 3G Electric. Kami adalah distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia, menangani logistik dan bea cukai untuk memastikan pengiriman tepat waktu.

Bagaimana cara memilih Waste Nut ANVIL yang tepat?

Pilih Waste Nut ANVIL berdasarkan ukuran pipa (3/4 in), jenis sambungan (Threaded), kelas tekanan (Class 150), dan material (Malleable Iron). Pastikan sesuai dengan spesifikasi sistem perpipaan Anda untuk menghindari kebocoran atau kegagalan sambungan.

ANVIL Produk

3G Electric memasok ANVIL low-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
This 90° elbow connects 1/2-inch and 1/4-inch pipes in low-pressure plumbing, steam, air, water, oil, or gas systems. It features threaded x threaded connections and is rated Class 125 with a maximum operating pressure of 175 psi at 150°F
ANVIL
This 90° elbow connects 1/2-inch and 1/4-inch pipes in low-pressure plumbing, steam, air, water, oil, or gas systems. It features threaded x threaded connections and is rated Class 125 with a maximum operating pressure of 175 psi at 150°F
Cast iron Class 125 threaded pipe tee with 2 in x 1 in x 1 1/4 in reducing configuration. Rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, steam, or gas piping systems
ANVIL
Cast iron Class 125 threaded pipe tee with 2 in x 1 in x 1 1/4 in reducing configuration. Rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, steam, or gas piping systems
Threaded x Threaded x Threaded tee fitting for low-pressure piping systems. Class 125 cast iron construction with maximum operating pressure of 175 psi at -20° to 150°F. Used to branch or combine flow in water, air, or steam lines
ANVIL
Threaded x Threaded x Threaded tee fitting for low-pressure piping systems. Class 125 cast iron construction with maximum operating pressure of 175 psi at -20° to 150°F. Used to branch or combine flow in water, air, or steam lines
This 45° elbow connects two threaded pipes of the same size, redirecting flow in low-pressure piping systems. Rated Class 125, it handles up to 175 psi at 150°F for water, air, or non-corrosive fluids. Threaded x threaded connections ensure secure assembly
ANVIL
This 45° elbow connects two threaded pipes of the same size, redirecting flow in low-pressure piping systems. Rated Class 125, it handles up to 175 psi at 150°F for water, air, or non-corrosive fluids. Threaded x threaded connections ensure secure assembly
This cast iron pipe tee features threaded x threaded x threaded connections for joining three pipes in low-pressure plumbing and industrial systems. Rated Class 125 with a maximum operating pressure of 175 psi at -20° to 150°F, it is suitable for water, air, or steam lines. The reducing tee allows for branch line connections in maintenance and repair applications
ANVIL
This cast iron pipe tee features threaded x threaded x threaded connections for joining three pipes in low-pressure plumbing and industrial systems. Rated Class 125 with a maximum operating pressure of 175 psi at -20° to 150°F, it is suitable for water, air, or steam lines. The reducing tee allows for branch line connections in maintenance and repair applications
This 90° elbow is a threaded pipe fitting with Threaded x Threaded connections, rated Class 125. It has a maximum operating pressure of 175 psi at 150°F. Used to change direction in low-pressure piping systems for water, air, or steam lines
ANVIL
This 90° elbow is a threaded pipe fitting with Threaded x Threaded connections, rated Class 125. It has a maximum operating pressure of 175 psi at 150°F. Used to change direction in low-pressure piping systems for water, air, or steam lines
This ANVIL pipe cross features four threaded connections (2 in x 2 in x 1 1/4 in x 1 1/4 in) for splitting or combining flow in four directions. Rated for 175 psi at -20° to 150°F, it is suitable for low-pressure water, air, or steam lines in industrial piping systems
ANVIL
This ANVIL pipe cross features four threaded connections (2 in x 2 in x 1 1/4 in x 1 1/4 in) for splitting or combining flow in four directions. Rated for 175 psi at -20° to 150°F, it is suitable for low-pressure water, air, or steam lines in industrial piping systems
Low-pressure threaded pipe cross with four female NPT connections: 1 1/2 in, 1 1/4 in, 1 in, and 1 in. Rated for 175 psi at -20° to 150°F. Used to split or combine flow in four directions in water, air, and non-corrosive fluid piping systems
ANVIL
Low-pressure threaded pipe cross with four female NPT connections: 1 1/2 in, 1 1/4 in, 1 in, and 1 in. Rated for 175 psi at -20° to 150°F. Used to split or combine flow in four directions in water, air, and non-corrosive fluid piping systems