Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL 90° Malleable Iron Threaded Pipe Elbow, 1/8 in, 300 psi @ 150°F - Medium-Pressure Threaded Pipe Fittings
ANVILMedium-Pressure Threaded Pipe Fittings

ANVIL 90° Malleable Iron Threaded Pipe Elbow, 1/8 in, 300 psi @ 150°F

ANVIL Metal Pipe Elbow 90° Elbow adalah fitting pipa berulir tekanan menengah yang dirancang untuk aplikasi perpipaan industri. Dengan spesifikasi tekanan operasi maksimum 300 psi pada suhu 150° F, produk ini…

SKU 3G-OTH-461876

Merek
ANVIL
Item
90° Malleable Iron Threaded Pipe Elbow, 1/8 in, 300 psi @ 150°F
Kategori
Medium-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0311000202
Type
300 psi @ 150° F, 1/8 in x 1/8 in, Malleable Iron, Made in USA
Maximum Operating Pressure
300 psi @ 150° F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ANVIL Metal Pipe Elbow 90° Elbow adalah fitting pipa berulir tekanan menengah yang dirancang untuk aplikasi perpipaan industri. Dengan spesifikasi tekanan operasi maksimum 300 psi pada suhu 150° F, produk ini tersedia dalam ukuran 1/8 in x 1/8 in dan terbuat dari besi lunak (malleable iron) buatan USA. Cocok digunakan sebagai sambungan pipa untuk mengubah arah aliran fluida dalam sistem perpipaan.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa ANVIL Metal Pipe Elbow 90° Elbow digunakan?

ANVIL Metal Pipe Elbow 90° Elbow digunakan sebagai sambungan pipa untuk mengubah arah aliran fluida sebesar 90 derajat dalam sistem perpipaan industri. Produk ini cocok untuk aplikasi tekanan menengah dengan spesifikasi tekanan operasi maksimum 300 psi pada suhu 150° F.

Apa spesifikasi ANVIL Metal Pipe Elbow 90° Elbow?

Spesifikasi ANVIL Metal Pipe Elbow 90° Elbow meliputi tipe 300 psi @ 150° F, ukuran 1/8 in x 1/8 in, material besi lunak (malleable iron), dan dibuat di USA. Nomor komponen pabrikan adalah 0311000202.

Di mana beli ANVIL Metal Pipe Elbow 90° Elbow di Indonesia?

Anda dapat membeli ANVIL Metal Pipe Elbow 90° Elbow melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih ANVIL Metal Pipe Elbow 90° Elbow yang tepat?

Pilih ANVIL Metal Pipe Elbow 90° Elbow berdasarkan ukuran pipa yang Anda gunakan, yaitu 1/8 in x 1/8 in. Pastikan tekanan operasi sistem Anda tidak melebihi 300 psi pada suhu 150° F. Material besi lunak cocok untuk aplikasi tekanan menengah.

ANVIL Produk

3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
Threaded pipe tee with three female threaded ends for branching or combining flow in medium-pressure piping systems. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F. Suitable for use in industrial water, oil, gas, and steam lines
ANVIL
Threaded pipe tee with three female threaded ends for branching or combining flow in medium-pressure piping systems. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F. Suitable for use in industrial water, oil, gas, and steam lines
This 90° elbow is a medium-pressure threaded pipe fitting used to change flow direction in piping systems. Made of malleable iron, it has a maximum operating pressure of 300 psi at 150°F and a 1/8 in x 1/8 in size. Suitable for steam, water, gas, and air lines
ANVIL
This 90° elbow is a medium-pressure threaded pipe fitting used to change flow direction in piping systems. Made of malleable iron, it has a maximum operating pressure of 300 psi at 150°F and a 1/8 in x 1/8 in size. Suitable for steam, water, gas, and air lines
Steel threaded plug for sealing open ends in medium-pressure piping systems. Rated for 300 psi at 150°F. Used in industrial plumbing, HVAC, and process lines
ANVIL
Steel threaded plug for sealing open ends in medium-pressure piping systems. Rated for 300 psi at 150°F. Used in industrial plumbing, HVAC, and process lines
This medium-pressure threaded pipe tee is used to branch or combine flow in piping systems. It features a 1 1/2 in x 1 1/2 in x 1 in configuration with threaded connections on all ends. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F, it is suitable for industrial applications such as water, oil, or gas lines
ANVIL
This medium-pressure threaded pipe tee is used to branch or combine flow in piping systems. It features a 1 1/2 in x 1 1/2 in x 1 in configuration with threaded connections on all ends. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F, it is suitable for industrial applications such as water, oil, or gas lines
This medium-pressure threaded pipe tee features a run x run x branch configuration with a 1 1/2 in x 1 1/2 in x 1/2 in size. Rated for 300 psi at 150°F, it is used to split or combine flow in industrial piping systems such as machining, material handling, and HVAC applications
ANVIL
This medium-pressure threaded pipe tee features a run x run x branch configuration with a 1 1/2 in x 1 1/2 in x 1/2 in size. Rated for 300 psi at 150°F, it is used to split or combine flow in industrial piping systems such as machining, material handling, and HVAC applications
This medium-pressure threaded pipe elbow is made of malleable iron and rated for 300 psi at 150° F. With 1-inch female threads on both ends, it is used to change direction in piping systems for steam, water, or gas lines in industrial and HVAC applications
ANVIL
This medium-pressure threaded pipe elbow is made of malleable iron and rated for 300 psi at 150° F. With 1-inch female threads on both ends, it is used to change direction in piping systems for steam, water, or gas lines in industrial and HVAC applications
Medium-pressure threaded pipe fitting for connecting straight pipe runs. Made of malleable iron, rated for 300 psi at 150°F. Suitable for use in steam, water, gas, and air systems
ANVIL
Medium-pressure threaded pipe fitting for connecting straight pipe runs. Made of malleable iron, rated for 300 psi at 150°F. Suitable for use in steam, water, gas, and air systems
This 90° pipe elbow is used to change the direction of piping in medium-pressure systems. Constructed from malleable iron, it has a maximum operating pressure of 300 psi at 150°F and measures 2 inches by 2 inches. Suitable for industrial plumbing, HVAC, and process lines
ANVIL
This 90° pipe elbow is used to change the direction of piping in medium-pressure systems. Constructed from malleable iron, it has a maximum operating pressure of 300 psi at 150°F and measures 2 inches by 2 inches. Suitable for industrial plumbing, HVAC, and process lines