Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Medium-Pressure Threaded Pipe Tee - Medium-Pressure Threaded Pipe Fittings
ANVILMedium-Pressure Threaded Pipe Fittings

ANVIL Medium-Pressure Threaded Pipe Tee

Tee pipa logam ANVIL adalah fitting pipa berulir tekanan menengah yang dirancang untuk aplikasi perpipaan industri. Produk ini memiliki konfigurasi Tee (run x run x branch) dengan ukuran 1 1/2 in x 1 1/4 in x 1 in…

SKU 3G-OTH-462460

Merek
ANVIL
Item
Medium-Pressure Threaded Pipe Tee
Kategori
Medium-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0311046601
Type
300 psi @ 150°F, 1 1/2 in x 1 1/4 in x 1 in
Maximum Operating Pressure
300 psi @ 150°F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Tee pipa logam ANVIL adalah fitting pipa berulir tekanan menengah yang dirancang untuk aplikasi perpipaan industri. Produk ini memiliki konfigurasi Tee (run x run x branch) dengan ukuran 1 1/2 in x 1 1/4 in x 1 in dan mampu menahan tekanan operasi maksimum 300 psi pada suhu 150°F. Cocok digunakan sebagai sambungan percabangan pada sistem perpipaan bertekanan.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa fitting Tee ANVIL ini digunakan?

Fitting Tee ANVIL ini digunakan untuk membuat sambungan percabangan pada sistem perpipaan bertekanan. Dengan konfigurasi run x run x branch, produk ini memungkinkan aliran fluida terbagi ke dua arah. Tekanan operasi maksimumnya adalah 300 psi @ 150°F, cocok untuk aplikasi industri.

Apa spesifikasi ukuran dari Tee ANVIL ini?

Tee ANVIL ini memiliki ukuran 1 1/2 in x 1 1/4 in x 1 in, dengan tipe sambungan berulir. Tekanan operasi maksimum mencapai 300 psi pada suhu 150°F. Nomor part pabrikan adalah 0311046601.

Di mana beli Tee ANVIL di Indonesia?

Anda dapat membeli Tee ANVIL ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah. Hubungi kami untuk informasi lebih lanjut.

Bagaimana cara memilih Tee ANVIL yang tepat?

Pilih Tee ANVIL berdasarkan ukuran pipa yang Anda butuhkan. Produk ini tersedia dalam ukuran 1 1/2 in x 1 1/4 in x 1 in dengan tekanan operasi 300 psi @ 150°F. Pastikan ukuran dan tekanan sesuai dengan sistem perpipaan Anda.

ANVIL Produk

3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
Medium-pressure threaded pipe fitting, straight connector reducing from 5 in to 4 in. Made of malleable iron with a maximum operating pressure of 300 psi at 150°F. Used to join pipes in plumbing, HVAC, and process systems for steam, water, or gas lines
ANVIL
Medium-pressure threaded pipe fitting, straight connector reducing from 5 in to 4 in. Made of malleable iron with a maximum operating pressure of 300 psi at 150°F. Used to join pipes in plumbing, HVAC, and process systems for steam, water, or gas lines
This medium-pressure threaded pipe fitting is a straight connector for joining two pipes of the same size in a line. Made of steel, it is rated for 300 psi at 150°F. Suitable for use in industrial plumbing, HVAC, and process piping systems
ANVIL
This medium-pressure threaded pipe fitting is a straight connector for joining two pipes of the same size in a line. Made of steel, it is rated for 300 psi at 150°F. Suitable for use in industrial plumbing, HVAC, and process piping systems
Medium-pressure threaded pipe tee with run x run x branch configuration. Rated for 300 psi at 150°F. Used to split or combine fluid flow in piping systems for industrial applications such as machining, HVAC, and pneumatics
ANVIL
Medium-pressure threaded pipe tee with run x run x branch configuration. Rated for 300 psi at 150°F. Used to split or combine fluid flow in piping systems for industrial applications such as machining, HVAC, and pneumatics
Threaded pipe cap made of malleable iron, rated for 300 psi at 150°F. Used to seal the end of threaded pipe in medium-pressure industrial piping systems, such as steam, water, gas, and air lines
ANVIL
Threaded pipe cap made of malleable iron, rated for 300 psi at 150°F. Used to seal the end of threaded pipe in medium-pressure industrial piping systems, such as steam, water, gas, and air lines
Threaded x Threaded x Threaded tee fitting for medium-pressure piping systems. Rated Class 150 with maximum operating pressure of 300 psi at 150°F. Used to split or combine flow in water, steam, or gas lines
ANVIL
Threaded x Threaded x Threaded tee fitting for medium-pressure piping systems. Rated Class 150 with maximum operating pressure of 300 psi at 150°F. Used to split or combine flow in water, steam, or gas lines
This 90° elbow fitting is used in medium-pressure piping systems to change flow direction. It features 1/4 in x 1/4 in threaded connections and is made of malleable iron. Rated for 300 psi at 150°F, it is suitable for steam, water, gas, and air lines
ANVIL
This 90° elbow fitting is used in medium-pressure piping systems to change flow direction. It features 1/4 in x 1/4 in threaded connections and is made of malleable iron. Rated for 300 psi at 150°F, it is suitable for steam, water, gas, and air lines
Medium-pressure threaded pipe tee with run x run x branch configuration. Rated for 300 psi at 150°F. Dimensions: 2 in x 2 in x 1/2 in. Used to split or combine fluid flow in piping systems requiring a branch connection from a main line
ANVIL
Medium-pressure threaded pipe tee with run x run x branch configuration. Rated for 300 psi at 150°F. Dimensions: 2 in x 2 in x 1/2 in. Used to split or combine fluid flow in piping systems requiring a branch connection from a main line
Malleable iron 45° elbow for medium-pressure threaded piping systems. Rated 300 psi at 150°F, 2 in x 2 in size. Used to change flow direction in steam, water, gas, and oil lines
ANVIL
Malleable iron 45° elbow for medium-pressure threaded piping systems. Rated 300 psi at 150°F, 2 in x 2 in size. Used to change flow direction in steam, water, gas, and oil lines