Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Cap: 1 in, Threaded, 300 psi @ 150° F, Cap - Medium-Pressure Threaded Pipe Fittings
ANVILMedium-Pressure Threaded Pipe Fittings

ANVIL Cap: 1 in, Threaded, 300 psi @ 150° F, Cap

Cap ANVIL berulir ini adalah fitting pipa tekanan sedang yang dirancang untuk menutup ujung pipa pada sistem perpipaan industri. Terbuat dari besi ulet (malleable iron) dengan tekanan operasi maksimum 300 psi pada…

SKU 3G-OTH-654413

Merek
ANVIL
Item
Cap: 1 in, Threaded, 300 psi @ 150° F, Cap
Kategori
Medium-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0318900602
Type
Threaded, 300 psi @ 150° F, Cap, Malleable Iron
Maximum Operating Pressure
300 psi @ 150° F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Cap ANVIL berulir ini adalah fitting pipa tekanan sedang yang dirancang untuk menutup ujung pipa pada sistem perpipaan industri. Terbuat dari besi ulet (malleable iron) dengan tekanan operasi maksimum 300 psi pada suhu 150° F, produk ini cocok untuk aplikasi perpipaan uap, air, dan udara bertekanan di pabrik kelapa sawit, semen, atau industri pengolahan makanan dan minuman. Sebagai distributor resmi ANVIL, 3G Electric menyediakan cap berulir ini untuk kebutuhan peralatan industri Anda di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa cap ANVIL berulir ini digunakan?

Cap ANVIL berulir ini digunakan untuk menutup ujung pipa pada sistem perpipaan tekanan sedang, seperti instalasi uap, air, atau udara bertekanan. Terbuat dari besi ulet (malleable iron) dengan tekanan operasi maksimum 300 psi pada suhu 150° F, produk ini memastikan penutupan yang rapat dan tahan lama.

Apa spesifikasi cap ANVIL threaded 1 in?

Spesifikasi cap ANVIL ini meliputi: tipe berulir (threaded), ukuran 1 in, tekanan operasi maksimum 300 psi pada suhu 150° F, bahan malleable iron, dan nomor komponen pabrikan 0318900602. Produk ini dirancang untuk aplikasi tekanan sedang pada sistem perpipaan industri.

Di mana beli cap ANVIL threaded 1 in di Indonesia?

Anda dapat membeli cap ANVIL threaded 1 in ini melalui 3G Electric, distributor resmi ANVIL yang melayani pengiriman ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah. Hubungi kami untuk minta penawaran.

Bagaimana cara memilih cap pipa berulir yang tepat?

Pilih cap pipa berulir berdasarkan ukuran pipa (misalnya 1 in), tekanan operasi (300 psi pada 150° F), dan bahan (malleable iron untuk ketahanan). Pastikan cap sesuai dengan standar ulir pipa yang digunakan di sistem Anda. ANVIL menyediakan cap dengan spesifikasi tersebut untuk aplikasi tekanan sedang.

ANVIL Produk

3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
This medium-pressure threaded pipe cross connects four pipes at a 90-degree intersection, rated for 300 psi at 150°F. With 1 1/2 inch threaded connections on all four outlets, it is used in industrial piping systems to distribute flow in multiple directions
ANVIL
This medium-pressure threaded pipe cross connects four pipes at a 90-degree intersection, rated for 300 psi at 150°F. With 1 1/2 inch threaded connections on all four outlets, it is used in industrial piping systems to distribute flow in multiple directions
This 45° elbow is a medium-pressure threaded pipe fitting made of malleable iron. Rated for 300 psi at 150°F, it has 3/4-inch female NPT connections on both ends. Used in steam, water, gas, and oil lines to redirect flow at a 45-degree angle in industrial and commercial piping systems
ANVIL
This 45° elbow is a medium-pressure threaded pipe fitting made of malleable iron. Rated for 300 psi at 150°F, it has 3/4-inch female NPT connections on both ends. Used in steam, water, gas, and oil lines to redirect flow at a 45-degree angle in industrial and commercial piping systems
This 90° elbow fitting connects threaded pipes of different sizes (1 in x 3/4 in) to change flow direction in medium-pressure piping systems. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F, it is suitable for steam, water, or gas lines requiring secure, leak-resistant joints
ANVIL
This 90° elbow fitting connects threaded pipes of different sizes (1 in x 3/4 in) to change flow direction in medium-pressure piping systems. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F, it is suitable for steam, water, or gas lines requiring secure, leak-resistant joints
Threaded x Threaded, Class 150 straight pipe fitting for medium-pressure applications. Connects 1 1/2 in to 1/2 in pipe sizes. Maximum operating pressure 300 psi at 150° F. Used in industrial plumbing, HVAC, and process piping systems
ANVIL
Threaded x Threaded, Class 150 straight pipe fitting for medium-pressure applications. Connects 1 1/2 in to 1/2 in pipe sizes. Maximum operating pressure 300 psi at 150° F. Used in industrial plumbing, HVAC, and process piping systems
Medium-pressure threaded pipe fitting for connecting or redirecting piping in industrial systems. Made of malleable iron, rated for 300 psi at 150°F. Suitable for steam, water, or air lines
ANVIL
Medium-pressure threaded pipe fitting for connecting or redirecting piping in industrial systems. Made of malleable iron, rated for 300 psi at 150°F. Suitable for steam, water, or air lines
This 45° threaded elbow connects two pipes at a 45-degree angle in medium-pressure piping systems. It features a threaded x threaded connection, Class 150 rating, and a maximum operating pressure of 300 psi at 150°F. Suitable for use in industrial plumbing, HVAC, and process lines
ANVIL
This 45° threaded elbow connects two pipes at a 45-degree angle in medium-pressure piping systems. It features a threaded x threaded connection, Class 150 rating, and a maximum operating pressure of 300 psi at 150°F. Suitable for use in industrial plumbing, HVAC, and process lines
Threaded x Threaded straight pipe fitting, Class 150, rated for 300 psi at 150°F. Connects 2-inch to 1-inch pipe sizes. Suitable for medium-pressure industrial piping systems such as water, oil, or gas lines
ANVIL
Threaded x Threaded straight pipe fitting, Class 150, rated for 300 psi at 150°F. Connects 2-inch to 1-inch pipe sizes. Suitable for medium-pressure industrial piping systems such as water, oil, or gas lines
This medium-pressure threaded pipe tee features a run x run x branch configuration with 3-inch main line and 3/4-inch branch outlet. Rated for 300 psi at 150°F, it is suitable for industrial piping systems requiring a durable threaded branch connection
ANVIL
This medium-pressure threaded pipe tee features a run x run x branch configuration with 3-inch main line and 3/4-inch branch outlet. Rated for 300 psi at 150°F, it is suitable for industrial piping systems requiring a durable threaded branch connection