Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL 3 in Threaded Cap, Malleable Iron, 300 psi @ 150°F - Medium-Pressure Threaded Pipe Fittings
ANVILMedium-Pressure Threaded Pipe Fittings

ANVIL 3 in Threaded Cap, Malleable Iron, 300 psi @ 150°F

Cap ANVIL berulir (threaded) berukuran 3 inci ini adalah fitting pipa tekanan menengah (medium-pressure threaded pipe fitting) yang dirancang untuk aplikasi perpipaan industri. Terbuat dari besi ulet (malleable iron)…

SKU 3G-OTH-654693

Merek
ANVIL
Item
3 in Threaded Cap, Malleable Iron, 300 psi @ 150°F
Kategori
Medium-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0318900842
Type
Threaded, 300 psi @ 150° F, Cap, Malleable Iron
Maximum Operating Pressure
300 psi @ 150° F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Cap ANVIL berulir (threaded) berukuran 3 inci ini adalah fitting pipa tekanan menengah (medium-pressure threaded pipe fitting) yang dirancang untuk aplikasi perpipaan industri. Terbuat dari besi ulet (malleable iron) dengan tekanan operasi maksimum 300 psi pada suhu 150° F, cap ini merupakan komponen andal untuk menutup ujung pipa pada sistem perpipaan Anda.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa cap ANVIL 3 inci ini digunakan?

Cap ANVIL berulir 3 inci ini digunakan untuk menutup ujung pipa pada sistem perpipaan tekanan menengah. Terbuat dari besi ulet (malleable iron), cap ini mampu menahan tekanan operasi maksimum 300 psi pada suhu 150° F, cocok untuk aplikasi industri seperti perpipaan uap, air, atau minyak.

Apa spesifikasi cap ANVIL 0318900842?

Spesifikasi cap ANVIL nomor part 0318900842 adalah: tipe berulir (threaded), ukuran 3 inci, bahan malleable iron, tekanan operasi maksimum 300 psi pada suhu 150° F. Produk ini termasuk dalam kategori medium-pressure threaded pipe fittings.

Di mana beli cap ANVIL 3 inci di Indonesia?

Anda dapat membeli cap ANVIL 3 inci (part number 0318900842) melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat fokus pada proyek perpipaan Anda.

Bagaimana cara memilih cap pipa yang tepat untuk sistem perpipaan saya?

Pilih cap pipa berdasarkan ukuran, tekanan, dan suhu operasi sistem Anda. Cap ANVIL 3 inci ini dirancang untuk tekanan 300 psi pada suhu 150° F dan terbuat dari malleable iron yang kuat. Pastikan ukuran ulir sesuai dengan pipa Anda untuk mencegah kebocoran.

ANVIL Produk

3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
This 45° elbow is a medium-pressure threaded pipe fitting made of malleable iron. Rated for 300 psi at 150°F, it has 3/4-inch female NPT connections on both ends. Used in steam, water, gas, and oil lines to redirect flow at a 45-degree angle in industrial and commercial piping systems
ANVIL
This 45° elbow is a medium-pressure threaded pipe fitting made of malleable iron. Rated for 300 psi at 150°F, it has 3/4-inch female NPT connections on both ends. Used in steam, water, gas, and oil lines to redirect flow at a 45-degree angle in industrial and commercial piping systems
This 90° elbow fitting connects threaded pipes of different sizes (1 in x 3/4 in) to change flow direction in medium-pressure piping systems. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F, it is suitable for steam, water, or gas lines requiring secure, leak-resistant joints
ANVIL
This 90° elbow fitting connects threaded pipes of different sizes (1 in x 3/4 in) to change flow direction in medium-pressure piping systems. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F, it is suitable for steam, water, or gas lines requiring secure, leak-resistant joints
Threaded x Threaded, Class 150 straight pipe fitting for medium-pressure applications. Connects 1 1/2 in to 1/2 in pipe sizes. Maximum operating pressure 300 psi at 150° F. Used in industrial plumbing, HVAC, and process piping systems
ANVIL
Threaded x Threaded, Class 150 straight pipe fitting for medium-pressure applications. Connects 1 1/2 in to 1/2 in pipe sizes. Maximum operating pressure 300 psi at 150° F. Used in industrial plumbing, HVAC, and process piping systems
Medium-pressure threaded pipe fitting for connecting or redirecting piping in industrial systems. Made of malleable iron, rated for 300 psi at 150°F. Suitable for steam, water, or air lines
ANVIL
Medium-pressure threaded pipe fitting for connecting or redirecting piping in industrial systems. Made of malleable iron, rated for 300 psi at 150°F. Suitable for steam, water, or air lines
This 45° threaded elbow connects two pipes at a 45-degree angle in medium-pressure piping systems. It features a threaded x threaded connection, Class 150 rating, and a maximum operating pressure of 300 psi at 150°F. Suitable for use in industrial plumbing, HVAC, and process lines
ANVIL
This 45° threaded elbow connects two pipes at a 45-degree angle in medium-pressure piping systems. It features a threaded x threaded connection, Class 150 rating, and a maximum operating pressure of 300 psi at 150°F. Suitable for use in industrial plumbing, HVAC, and process lines
Threaded x Threaded straight pipe fitting, Class 150, rated for 300 psi at 150°F. Connects 2-inch to 1-inch pipe sizes. Suitable for medium-pressure industrial piping systems such as water, oil, or gas lines
ANVIL
Threaded x Threaded straight pipe fitting, Class 150, rated for 300 psi at 150°F. Connects 2-inch to 1-inch pipe sizes. Suitable for medium-pressure industrial piping systems such as water, oil, or gas lines
This medium-pressure threaded pipe tee features a run x run x branch configuration with 3-inch main line and 3/4-inch branch outlet. Rated for 300 psi at 150°F, it is suitable for industrial piping systems requiring a durable threaded branch connection
ANVIL
This medium-pressure threaded pipe tee features a run x run x branch configuration with 3-inch main line and 3/4-inch branch outlet. Rated for 300 psi at 150°F, it is suitable for industrial piping systems requiring a durable threaded branch connection
Medium-pressure threaded pipe fitting, 90° elbow with threaded x threaded connections. Rated Class 150, maximum operating pressure 300 psi at 150°F. Used to change piping direction in industrial plumbing, HVAC, and process lines
ANVIL
Medium-pressure threaded pipe fitting, 90° elbow with threaded x threaded connections. Rated Class 150, maximum operating pressure 300 psi at 150°F. Used to change piping direction in industrial plumbing, HVAC, and process lines