Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL 1/2 in Threaded Cast Iron Plug, 300 psi @ 150°F - Medium-Pressure Threaded Pipe Fittings
ANVILMedium-Pressure Threaded Pipe Fittings

ANVIL 1/2 in Threaded Cast Iron Plug, 300 psi @ 150°F

Plug ANVIL berukuran 1/2 inci ini merupakan fitting pipa bertekanan sedang (Medium-Pressure Threaded Pipe Fittings) yang dirancang untuk aplikasi perpipaan industri. Terbuat dari besi cor (Cast Iron) dengan sambungan…

SKU 3G-OTH-654698

Merek
ANVIL
Item
1/2 in Threaded Cast Iron Plug, 300 psi @ 150°F
Part Number
0318901808
Kategori
Medium-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0318901808
Type
Threaded, 300 psi @ 150° F, Plug, Cast Iron
Maximum Operating Pressure
300 psi @ 150° F

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Plug ANVIL berukuran 1/2 inci ini merupakan fitting pipa bertekanan sedang (Medium-Pressure Threaded Pipe Fittings) yang dirancang untuk aplikasi perpipaan industri. Terbuat dari besi cor (Cast Iron) dengan sambungan ulir (Threaded), komponen ini mampu menahan tekanan operasi maksimum 300 psi pada suhu 150° F. Plug ini adalah solusi andal untuk menutup ujung jalur pipa pada sistem perpipaan di pabrik kelapa sawit, pabrik semen, atau fasilitas industri lainnya di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa plug ANVIL 1/2 inci ini digunakan?

Plug ANVIL 1/2 inci ini digunakan untuk menutup ujung fitting atau jalur pipa yang tidak terpakai pada sistem perpipaan bertekanan. Dengan tekanan operasi maksimum 300 psi pada suhu 150° F, plug besi cor ini cocok untuk aplikasi industri seperti ketel uap, sistem hidrolik, dan saluran udara bertekanan.

Apa spesifikasi plug ANVIL 0318901808?

Plug ANVIL dengan nomor part 0318901808 memiliki ukuran 1/2 inci, tipe ulir (Threaded), terbuat dari besi cor (Cast Iron), dan mampu menahan tekanan operasi maksimum 300 psi pada suhu 150° F. Produk ini termasuk dalam kategori Medium-Pressure Threaded Pipe Fittings.

Di mana beli plug ANVIL 1/2 inci di Indonesia?

Anda dapat membeli plug ANVIL 1/2 inci ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah. Hubungi kami untuk minta penawaran.

Bagaimana cara memilih plug pipa yang tepat?

Pilih plug pipa berdasarkan ukuran, material, dan tekanan kerja yang sesuai dengan sistem Anda. Plug ANVIL 1/2 inci ini terbuat dari besi cor dengan tekanan maksimum 300 psi pada suhu 150° F, cocok untuk aplikasi bertekanan sedang. Pastikan sambungan ulir sesuai dengan fitting yang digunakan.

Not sure this is the right part? Photo-identify it→

ANVIL Produk

3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This threaded plug is used to seal open ends in medium-pressure piping systems. Made of cast iron, it features NPT threads and is rated for a maximum operating pressure of 300 psi at 150°F. Suitable for applications such as water, steam, gas, or oil lines in industrial plumbing, HVAC, and process piping
ANVIL
This threaded plug is used to seal open ends in medium-pressure piping systems. Made of cast iron, it features NPT threads and is rated for a maximum operating pressure of 300 psi at 150°F. Suitable for applications such as water, steam, gas, or oil lines in industrial plumbing, HVAC, and process piping
Cast iron threaded plug for sealing unused openings in medium-pressure piping systems. Rated for 300 psi at 150°F. Suitable for steam, water, and gas lines in industrial and commercial applications
ANVIL
Cast iron threaded plug for sealing unused openings in medium-pressure piping systems. Rated for 300 psi at 150°F. Suitable for steam, water, and gas lines in industrial and commercial applications
This cast iron plug is a medium-pressure threaded pipe fitting with 1/2 in NPT threads. It is rated for a maximum operating pressure of 300 psi at 150°F. Used to seal the end of a pipe in plumbing, HVAC, and process piping systems
ANVIL
This cast iron plug is a medium-pressure threaded pipe fitting with 1/2 in NPT threads. It is rated for a maximum operating pressure of 300 psi at 150°F. Used to seal the end of a pipe in plumbing, HVAC, and process piping systems
Threaded plug for sealing open ends in medium-pressure piping systems. Constructed of cast iron with NPT threads. Rated for maximum operating pressure of 300 psi at 150°F. Suitable for use in industrial water, steam, gas, and oil lines
ANVIL
Threaded plug for sealing open ends in medium-pressure piping systems. Constructed of cast iron with NPT threads. Rated for maximum operating pressure of 300 psi at 150°F. Suitable for use in industrial water, steam, gas, and oil lines
This medium-pressure threaded pipe plug is used to seal the end of a piping system. Made of malleable iron with NPT threads, it is rated for 300 psi at 150°F. Suitable for industrial plumbing, HVAC, and process lines requiring a leak-proof closure
ANVIL
This medium-pressure threaded pipe plug is used to seal the end of a piping system. Made of malleable iron with NPT threads, it is rated for 300 psi at 150°F. Suitable for industrial plumbing, HVAC, and process lines requiring a leak-proof closure
This steel plug seals the end of a pipe in medium-pressure threaded systems. Rated for 300 psi at 150°F, it features 1/8 in NPT threads. Suitable for plumbing, HVAC, and general plant maintenance applications
ANVIL
This steel plug seals the end of a pipe in medium-pressure threaded systems. Rated for 300 psi at 150°F, it features 1/8 in NPT threads. Suitable for plumbing, HVAC, and general plant maintenance applications

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
Medium-pressure threaded pipe fitting for connecting or redirecting piping in industrial systems. Reduces from 4-inch to 3-inch size. Rated at 300 psi at 150°F. Made of malleable iron
ANVIL
Medium-pressure threaded pipe fitting for connecting or redirecting piping in industrial systems. Reduces from 4-inch to 3-inch size. Rated at 300 psi at 150°F. Made of malleable iron
This 45° elbow is a medium-pressure threaded pipe fitting made of malleable iron. It is rated for 300 psi at 150°F and has a 3-inch size. Used to change flow direction in piping systems for steam, water, gas, or oil
ANVIL
This 45° elbow is a medium-pressure threaded pipe fitting made of malleable iron. It is rated for 300 psi at 150°F and has a 3-inch size. Used to change flow direction in piping systems for steam, water, gas, or oil
Straight medium-pressure threaded pipe fitting for connecting or extending piping in industrial systems. Made of malleable iron with a maximum operating pressure of 300 psi at 150°F. Suitable for use in plumbing, HVAC, and process lines
ANVIL
Straight medium-pressure threaded pipe fitting for connecting or extending piping in industrial systems. Made of malleable iron with a maximum operating pressure of 300 psi at 150°F. Suitable for use in plumbing, HVAC, and process lines
Medium-pressure threaded pipe tee with run x run x branch configuration. Rated for 300 psi at 150°F. Used to split or combine fluid flow in piping systems for water, oil, gas, and steam lines
ANVIL
Medium-pressure threaded pipe tee with run x run x branch configuration. Rated for 300 psi at 150°F. Used to split or combine fluid flow in piping systems for water, oil, gas, and steam lines
Threaded x threaded straight pipe fitting for connecting two pipes in line. Class 150 rating, maximum operating pressure 300 psi at 150° F. Suitable for medium-pressure water, oil, or gas lines
ANVIL
Threaded x threaded straight pipe fitting for connecting two pipes in line. Class 150 rating, maximum operating pressure 300 psi at 150° F. Suitable for medium-pressure water, oil, or gas lines
This medium-pressure threaded pipe tee connects three pipes in a T-shaped configuration. It is a Class 150 fitting rated for 300 psi at 150°F, suitable for use in water, air, or steam lines in industrial plumbing and process piping systems
ANVIL
This medium-pressure threaded pipe tee connects three pipes in a T-shaped configuration. It is a Class 150 fitting rated for 300 psi at 150°F, suitable for use in water, air, or steam lines in industrial plumbing and process piping systems
This medium-pressure threaded pipe tee is used to create a branch connection in piping systems. It features a run x run x branch configuration with a maximum operating pressure of 300 psi at 150°F. Size: 1 in x 1/4 in x 1 in. Made in USA
ANVIL
This medium-pressure threaded pipe tee is used to create a branch connection in piping systems. It features a run x run x branch configuration with a maximum operating pressure of 300 psi at 150°F. Size: 1 in x 1/4 in x 1 in. Made in USA
Medium-pressure threaded pipe fitting for connecting pipes of different sizes. Malleable iron construction rated for 300 psi at 150°F. Suitable for steam, water, and gas lines in industrial and commercial piping systems
ANVIL
Medium-pressure threaded pipe fitting for connecting pipes of different sizes. Malleable iron construction rated for 300 psi at 150°F. Suitable for steam, water, and gas lines in industrial and commercial piping systems