Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Sumbat: Sumbat, 300 psi @ 150° F, 3/8 in, Berulir NPT, Baja - Medium-Pressure Threaded Pipe Fittings
ANVILMedium-Pressure Threaded Pipe Fittings

ANVIL Sumbat: Sumbat, 300 psi @ 150° F, 3/8 in, Berulir NPT, Baja

ANVIL Plug adalah fitting pipa berulir bertekanan sedang yang dirancang untuk aplikasi perpipaan industri. Dengan spesifikasi 300 psi @ 150° F, ukuran 3/8 in, ulir NPT, dan material baja, produk ini cocok untuk…

SKU 3G-OTH-462526

Merek
ANVIL
Item
Sumbat: Sumbat, 300 psi @ 150° F, 3/8 in, Berulir NPT, Baja
Kategori
Medium-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0319901526
Type
300 psi @ 150° F, 3/8 in, NPT Threaded, Steel, Made in USA
Maximum Operating Pressure
300 psi @ 150° F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ANVIL Plug adalah fitting pipa berulir bertekanan sedang yang dirancang untuk aplikasi perpipaan industri. Dengan spesifikasi 300 psi @ 150° F, ukuran 3/8 in, ulir NPT, dan material baja, produk ini cocok untuk menutup ujung jalur pipa pada sistem peralatan pembakaran atau ketel uap. Diproduksi di Amerika Serikat, plug ini menawarkan keandalan untuk kebutuhan penyambungan pipa Anda.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa ANVIL Plug digunakan?

ANVIL Plug digunakan sebagai penutup ujung pipa pada sistem perpipaan bertekanan, termasuk pada rangkaian gas atau sistem pembakar industri. Dengan spesifikasi 300 psi @ 150° F dan ulir NPT 3/8 in, plug ini memastikan sambungan kedap pada tekanan operasi tertentu.

Apa spesifikasi ANVIL Plug 0319901526?

ANVIL Plug dengan nomor bagian 0319901526 memiliki tekanan operasi maksimum 300 psi @ 150° F, ukuran 3/8 in, ulir NPT, material baja, dan dibuat di Amerika Serikat. Produk ini termasuk dalam kategori fitting pipa berulir bertekanan sedang.

Di mana beli ANVIL Plug di Indonesia?

Anda dapat membeli ANVIL Plug melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan kepabeanan sehingga Anda dapat menerima produk dengan nomor bagian 0319901526 langsung di lokasi proyek Anda.

Bagaimana cara memilih ANVIL Plug yang tepat?

Pilih ANVIL Plug berdasarkan ukuran pipa dan tekanan sistem Anda. Untuk aplikasi dengan tekanan hingga 300 psi @ 150° F dan ukuran 3/8 in NPT, plug baja ini sesuai. Pastikan ulir NPT cocok dengan fitting lain di sistem perpipaan Anda.

ANVIL Produk

3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Steel pipe cap with 1/4 in NPT threads, rated for 300 psi at 150° F. Used to seal the end of threaded pipe in medium-pressure systems such as industrial plumbing, HVAC, and process piping
ANVIL
Steel pipe cap with 1/4 in NPT threads, rated for 300 psi at 150° F. Used to seal the end of threaded pipe in medium-pressure systems such as industrial plumbing, HVAC, and process piping
This ANVIL plug is a 3/8 inch NPT threaded steel pipe fitting rated for a maximum operating pressure of 2000 psi at 150°F. It is used to seal and close off pipe ends in high-pressure industrial piping systems
ANVIL
This ANVIL plug is a 3/8 inch NPT threaded steel pipe fitting rated for a maximum operating pressure of 2000 psi at 150°F. It is used to seal and close off pipe ends in high-pressure industrial piping systems
Steel pipe plug with 3/4 inch NPT threads, rated for a maximum operating pressure of 2000 psi at 150°F. Used to seal open ends in high-pressure piping systems such as steam, water, or oil lines
ANVIL
Steel pipe plug with 3/4 inch NPT threads, rated for a maximum operating pressure of 2000 psi at 150°F. Used to seal open ends in high-pressure piping systems such as steam, water, or oil lines
This medium-pressure threaded pipe fitting is a straight connector made of malleable iron. Rated for 300 psi at 150°F, it is used to join or extend piping in industrial systems such as plumbing, HVAC, and process lines
ANVIL
This medium-pressure threaded pipe fitting is a straight connector made of malleable iron. Rated for 300 psi at 150°F, it is used to join or extend piping in industrial systems such as plumbing, HVAC, and process lines
Medium-pressure threaded pipe fitting for connecting two pipes of different sizes. Made of malleable iron with a maximum operating pressure of 300 psi at 150°F. Suitable for use in industrial plumbing, HVAC, and process piping systems handling steam, water, or gas
ANVIL
Medium-pressure threaded pipe fitting for connecting two pipes of different sizes. Made of malleable iron with a maximum operating pressure of 300 psi at 150°F. Suitable for use in industrial plumbing, HVAC, and process piping systems handling steam, water, or gas
Medium-pressure threaded pipe fitting for connecting straight sections of pipe in plumbing and process piping systems. Made of malleable iron with a maximum operating pressure of 300 psi at 150°F. Size: 1 in x 1/8 in. Manufactured in the USA
ANVIL
Medium-pressure threaded pipe fitting for connecting straight sections of pipe in plumbing and process piping systems. Made of malleable iron with a maximum operating pressure of 300 psi at 150°F. Size: 1 in x 1/8 in. Manufactured in the USA

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
Medium-pressure threaded pipe fitting for connecting or redirecting piping in industrial systems. Reduces from 4-inch to 3-inch size. Rated at 300 psi at 150°F. Made of malleable iron
ANVIL
Medium-pressure threaded pipe fitting for connecting or redirecting piping in industrial systems. Reduces from 4-inch to 3-inch size. Rated at 300 psi at 150°F. Made of malleable iron
This 45° elbow is a medium-pressure threaded pipe fitting made of malleable iron. It is rated for 300 psi at 150°F and has a 3-inch size. Used to change flow direction in piping systems for steam, water, gas, or oil
ANVIL
This 45° elbow is a medium-pressure threaded pipe fitting made of malleable iron. It is rated for 300 psi at 150°F and has a 3-inch size. Used to change flow direction in piping systems for steam, water, gas, or oil
Straight medium-pressure threaded pipe fitting for connecting or extending piping in industrial systems. Made of malleable iron with a maximum operating pressure of 300 psi at 150°F. Suitable for use in plumbing, HVAC, and process lines
ANVIL
Straight medium-pressure threaded pipe fitting for connecting or extending piping in industrial systems. Made of malleable iron with a maximum operating pressure of 300 psi at 150°F. Suitable for use in plumbing, HVAC, and process lines
Medium-pressure threaded pipe tee with run x run x branch configuration. Rated for 300 psi at 150°F. Used to split or combine fluid flow in piping systems for water, oil, gas, and steam lines
ANVIL
Medium-pressure threaded pipe tee with run x run x branch configuration. Rated for 300 psi at 150°F. Used to split or combine fluid flow in piping systems for water, oil, gas, and steam lines
Threaded x threaded straight pipe fitting for connecting two pipes in line. Class 150 rating, maximum operating pressure 300 psi at 150° F. Suitable for medium-pressure water, oil, or gas lines
ANVIL
Threaded x threaded straight pipe fitting for connecting two pipes in line. Class 150 rating, maximum operating pressure 300 psi at 150° F. Suitable for medium-pressure water, oil, or gas lines
This medium-pressure threaded pipe tee connects three pipes in a T-shaped configuration. It is a Class 150 fitting rated for 300 psi at 150°F, suitable for use in water, air, or steam lines in industrial plumbing and process piping systems
ANVIL
This medium-pressure threaded pipe tee connects three pipes in a T-shaped configuration. It is a Class 150 fitting rated for 300 psi at 150°F, suitable for use in water, air, or steam lines in industrial plumbing and process piping systems
This medium-pressure threaded pipe tee is used to create a branch connection in piping systems. It features a run x run x branch configuration with a maximum operating pressure of 300 psi at 150°F. Size: 1 in x 1/4 in x 1 in. Made in USA
ANVIL
This medium-pressure threaded pipe tee is used to create a branch connection in piping systems. It features a run x run x branch configuration with a maximum operating pressure of 300 psi at 150°F. Size: 1 in x 1/4 in x 1 in. Made in USA
Medium-pressure threaded pipe fitting for connecting pipes of different sizes. Malleable iron construction rated for 300 psi at 150°F. Suitable for steam, water, and gas lines in industrial and commercial piping systems
ANVIL
Medium-pressure threaded pipe fitting for connecting pipes of different sizes. Malleable iron construction rated for 300 psi at 150°F. Suitable for steam, water, and gas lines in industrial and commercial piping systems