Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Pipa Logam Lurus: Lurus, 3/4 in x 1/2 in, Ulir NPT Betina x Ulir NPT Jantan - High Pressure Zinc-Galvanized Steel Pipe Fittings
ANVILHigh Pressure Zinc-Galvanized Steel Pipe Fittings

ANVIL Pipa Logam Lurus: Lurus, 3/4 in x 1/2 in, Ulir NPT Betina x Ulir NPT Jantan

ANVIL Metal Pipe Straight adalah fitting pipa baja galvanis bertekanan tinggi yang dirancang untuk sambungan pipa lurus. Tipe 3/4 in x 1/2 in dengan ulir Female NPT Threaded x Male NPT Threaded dari baja, fitting ini…

SKU 3G-OTH-660559

Merek
ANVIL
Item
Pipa Logam Lurus: Lurus, 3/4 in x 1/2 in, Ulir NPT Betina x Ulir NPT Jantan
Kategori
High Pressure Zinc-Galvanized Steel Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0319905600
Type
3/4 in x 1/2 in, Female NPT Threaded x Male NPT Threaded, Steel
Maximum Operating Pressure
2,000 psi @ 150° F

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ANVIL Metal Pipe Straight adalah fitting pipa baja galvanis bertekanan tinggi yang dirancang untuk sambungan pipa lurus. Tipe 3/4 in x 1/2 in dengan ulir Female NPT Threaded x Male NPT Threaded dari baja, fitting ini memiliki Maximum Operating Pressure 2.000 psi @ 150° F. Cocok untuk aplikasi perpipaan industri yang membutuhkan ketahanan tekanan tinggi.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi ANVIL Metal Pipe Straight 0319905600?

ANVIL Metal Pipe Straight dengan nomor part 0319905600 memiliki tipe 3/4 in x 1/2 in, ulir Female NPT Threaded x Male NPT Threaded, material baja galvanis, dan Maximum Operating Pressure 2.000 psi @ 150° F.

Untuk apa ANVIL Metal Pipe Straight digunakan?

ANVIL Metal Pipe Straight digunakan sebagai fitting pipa lurus untuk menyambung dua pipa dengan ukuran berbeda (3/4 in ke 1/2 in) dalam sistem perpipaan bertekanan tinggi, seperti pada instalasi industri yang membutuhkan sambungan kuat dan tahan korosi.

Di mana beli ANVIL Metal Pipe Straight di Indonesia?

Anda dapat membeli ANVIL Metal Pipe Straight melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman sampai ke lokasi Anda.

Bagaimana cara memilih ANVIL Metal Pipe Straight yang tepat?

Pilih ANVIL Metal Pipe Straight berdasarkan ukuran ulir yang dibutuhkan. Tipe 3/4 in x 1/2 in dengan Female NPT Threaded x Male NPT Threaded cocok untuk menyambung pipa dari ukuran lebih besar ke lebih kecil. Pastikan tekanan kerja sistem tidak melebihi 2.000 psi @ 150° F.

ANVIL Produk

3G Electric memasok ANVIL high pressure zinc-galvanized steel pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This steel pipe fitting features a zinc-galvanized finish and NPT threaded connections. It is used to connect or extend piping in fluid, gas, or steam systems requiring a maximum operating pressure of 1,500 psi at 150°F
ANVIL
This steel pipe fitting features a zinc-galvanized finish and NPT threaded connections. It is used to connect or extend piping in fluid, gas, or steam systems requiring a maximum operating pressure of 1,500 psi at 150°F
This straight pipe fitting connects or extends piping in high-pressure fluid or gas systems. It features a 3/4 in male NPT thread and a 1/8 in female NPT thread, with a maximum operating pressure of 2,000 psi at 150° F. The zinc-galvanized steel construction provides corrosion resistance for industrial applications
ANVIL
This straight pipe fitting connects or extends piping in high-pressure fluid or gas systems. It features a 3/4 in male NPT thread and a 1/8 in female NPT thread, with a maximum operating pressure of 2,000 psi at 150° F. The zinc-galvanized steel construction provides corrosion resistance for industrial applications
This straight pipe fitting connects male and female NPT threaded pipes of different sizes. Made of zinc-galvanized steel, it is suited for high-pressure fluid or gas lines. Rated for 1,500 psi at 150°F
ANVIL
This straight pipe fitting connects male and female NPT threaded pipes of different sizes. Made of zinc-galvanized steel, it is suited for high-pressure fluid or gas lines. Rated for 1,500 psi at 150°F
This steel pipe fitting is rated Class 6000 for extreme-pressure applications. It has a 3/8 in x 1/4 in size and a zinc-galvanized finish. No pre-applied thread sealant is included. Typical uses include connecting pipes in industrial hydraulic, pneumatic, and combustion systems
ANVIL
This steel pipe fitting is rated Class 6000 for extreme-pressure applications. It has a 3/8 in x 1/4 in size and a zinc-galvanized finish. No pre-applied thread sealant is included. Typical uses include connecting pipes in industrial hydraulic, pneumatic, and combustion systems
This steel pipe fitting connects straight sections of threaded pipe in medium-pressure fluid or gas systems. Rated for 300 psi at 150°F, it is commonly used in plumbing, HVAC, and process piping. Made in USA
ANVIL
This steel pipe fitting connects straight sections of threaded pipe in medium-pressure fluid or gas systems. Rated for 300 psi at 150°F, it is commonly used in plumbing, HVAC, and process piping. Made in USA
Threaded high-pressure pipe fitting with 3/4 in x 1/2 in female NPT connections on both ends. Made of steel, rated for maximum operating pressure of 2,000 psi at 150° F. Used to connect or extend piping in fluid, gas, and hydraulic systems
ANVIL
Threaded high-pressure pipe fitting with 3/4 in x 1/2 in female NPT connections on both ends. Made of steel, rated for maximum operating pressure of 2,000 psi at 150° F. Used to connect or extend piping in fluid, gas, and hydraulic systems

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
Straight pipe fitting for connecting or extending piping in high-pressure fluid or gas systems. Features a 3/4 in female NPT thread to 1/4 in male NPT thread reduction. Constructed from steel with a zinc-galvanized finish. Rated for maximum operating pressure of 2,000 psi at 150°F
ANVIL
Straight pipe fitting for connecting or extending piping in high-pressure fluid or gas systems. Features a 3/4 in female NPT thread to 1/4 in male NPT thread reduction. Constructed from steel with a zinc-galvanized finish. Rated for maximum operating pressure of 2,000 psi at 150°F
This ANVIL wye pipe fitting is made of malleable iron with a zinc-galvanized finish. It has four 1 1/4 in connections and is rated for a maximum operating pressure of 1500 psi at 150°F. Used in high-pressure piping systems to split or combine flow in steam, water, or gas lines
ANVIL
This ANVIL wye pipe fitting is made of malleable iron with a zinc-galvanized finish. It has four 1 1/4 in connections and is rated for a maximum operating pressure of 1500 psi at 150°F. Used in high-pressure piping systems to split or combine flow in steam, water, or gas lines
Malleable iron wye fitting with zinc-galvanized finish for corrosion resistance. Rated Class 150 with maximum operating pressure of 2000 psi at 150°F. Used to split or combine fluid flow in piping systems requiring a 3/8 in branch connection
ANVIL
Malleable iron wye fitting with zinc-galvanized finish for corrosion resistance. Rated Class 150 with maximum operating pressure of 2000 psi at 150°F. Used to split or combine fluid flow in piping systems requiring a 3/8 in branch connection
This 90° elbow is made of steel with a zinc-galvanized finish and features 1 1/2 in female NPT threaded connections on both ends. It is rated for a maximum operating pressure of 2,000 psi at 150° F, suitable for changing flow direction in high-pressure piping systems
ANVIL
This 90° elbow is made of steel with a zinc-galvanized finish and features 1 1/2 in female NPT threaded connections on both ends. It is rated for a maximum operating pressure of 2,000 psi at 150° F, suitable for changing flow direction in high-pressure piping systems
This 90° elbow is used to change direction in piping systems. It features 3/4 in x 3/4 in female NPT threaded connections and is constructed from steel with a zinc-galvanized finish. Rated for a maximum operating pressure of 2,000 psi at 150° F, it is suitable for high-pressure industrial applications
ANVIL
This 90° elbow is used to change direction in piping systems. It features 3/4 in x 3/4 in female NPT threaded connections and is constructed from steel with a zinc-galvanized finish. Rated for a maximum operating pressure of 2,000 psi at 150° F, it is suitable for high-pressure industrial applications
This straight pipe fitting connects pipes in high-pressure fluid or gas systems. It features a 1 1/4 in male NPT threaded end and a 1 in female NPT threaded end, constructed from zinc-galvanized steel. Rated for a maximum operating pressure of 1,500 psi at 150° F
ANVIL
This straight pipe fitting connects pipes in high-pressure fluid or gas systems. It features a 1 1/4 in male NPT threaded end and a 1 in female NPT threaded end, constructed from zinc-galvanized steel. Rated for a maximum operating pressure of 1,500 psi at 150° F
Straight pipe fitting with 4-inch male NPT threaded end and 2 1/2-inch female NPT threaded end. Made of high-pressure zinc-galvanized steel. Used to connect pipes in water, steam, gas, and oil lines within industrial systems
ANVIL
Straight pipe fitting with 4-inch male NPT threaded end and 2 1/2-inch female NPT threaded end. Made of high-pressure zinc-galvanized steel. Used to connect pipes in water, steam, gas, and oil lines within industrial systems
This 90° pipe elbow is made of zinc-galvanized steel with 1 in x 1 in female NPT threaded connections. Rated for a maximum operating pressure of 2,000 psi at 150° F, it is used to change direction in industrial piping systems for fluid or gas transport
ANVIL
This 90° pipe elbow is made of zinc-galvanized steel with 1 in x 1 in female NPT threaded connections. Rated for a maximum operating pressure of 2,000 psi at 150° F, it is used to change direction in industrial piping systems for fluid or gas transport