ANVIL Metal Pipe Tee: 1 1/4 in x 1 1/4 in x 1 1/4 in, 1,500 psi @ 150°F, Malleable Iron
The ANVIL Metal Pipe Tee (1 1/4 in x 1 1/4 in x 1 1/4 in) is a threaded high-pressure pipe fitting rated for 1,500 psi @ 150°F, constructed from malleable iron and classified as Class 300 (MPN 0310516604). This…
SKU 3G-OTH-466712
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Tee (1 1/4 in x 1 1/4 in x 1 1/4 in) is a threaded high-pressure pipe fitting rated for 1,500 psi @ 150°F, constructed from malleable iron and classified as Class 300 (MPN 0310516604). This fitting is designed for industrial piping systems requiring a durable, high-pressure branch connection.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Metal Pipe Tee used for?
The ANVIL Metal Pipe Tee creates a 90-degree branch connection in high-pressure industrial piping systems. It is commonly used in steam, water, gas, and oil lines where a durable, leak-resistant joint is required at pressures up to 1,500 psi @ 150°F.
What are the specifications of the ANVIL Metal Pipe Tee 0310516604?
This ANVIL tee is a 1 1/4 in x 1 1/4 in x 1 1/4 in threaded fitting made of malleable iron, Class 300. It has a maximum operating pressure of 1,500 psi @ 150°F. The manufacturer part number is 0310516604.
Where to buy the ANVIL Metal Pipe Tee worldwide?
3G Electric supplies the ANVIL Metal Pipe Tee (MPN 0310516604) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this malleable iron Class 300 fitting.
How to install the ANVIL Metal Pipe Tee?
Apply pipe thread sealant to the male threads of adjoining pipes. Hand-tighten the tee onto each pipe end, then use wrenches on the tee's hex flats to achieve a snug fit without over-torquing. Avoid using the tee body as a lever to prevent stress fractures.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
