ANVIL Cap: 1/4 in, NPT Threaded, 2,000 psi @ 150° F, Malleable Iron
The ANVIL Cap is a 1/4 in NPT threaded high-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 2,000 psi at 150° F. This cap provides a secure closure for threaded pipe ends in…
SKU 3G-OTH-467167
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is a 1/4 in NPT threaded high-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 2,000 psi at 150° F. This cap provides a secure closure for threaded pipe ends in industrial systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL 1/4 in NPT threaded cap used for?
The ANVIL cap is a malleable iron pipe fitting that seals threaded pipe ends in high-pressure industrial systems. It is rated for 2,000 psi at 150° F and is commonly used in steam, air, water, and gas lines where a secure, leak-proof closure is required.
What are the specifications of the ANVIL cap 0318901261?
This ANVIL cap has a 1/4 in NPT thread, is made of malleable iron, and has a maximum operating pressure of 2,000 psi at 150° F. The manufacturer part number is 0318901261. It is designed for threaded high-pressure pipe fitting applications.
Where to buy the ANVIL 1/4 in NPT cap worldwide?
3G Electric supplies the ANVIL 1/4 in NPT threaded cap (MPN 0318901261) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this malleable iron pipe fitting.
How to install an ANVIL threaded pipe cap?
Apply pipe thread sealant or PTFE tape to the male pipe threads, then hand-tighten the ANVIL cap onto the pipe end. Use a wrench for final snugging—avoid overtightening to prevent cracking the malleable iron. Always verify pressure rating compatibility with your system.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
