ANVIL Cap: 1/2 in, NPT Threaded, 2,000 psi @ 150° F, Malleable Iron
The ANVIL Cap is a 1/2 in NPT threaded high-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 2,000 psi at 150° F. This cap provides a reliable closure for threaded pipe ends in…
SKU 3G-OTH-466548
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is a 1/2 in NPT threaded high-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 2,000 psi at 150° F. This cap provides a reliable closure for threaded pipe ends in industrial systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Cap used for?
The ANVIL Cap is a threaded pipe fitting used to seal the end of a 1/2 in NPT pipe in high-pressure industrial systems. It provides a reliable closure for applications such as steam, water, oil, or gas lines where a maximum operating pressure of 2,000 psi at 150° F is required.
What are the specifications of the ANVIL Cap?
The ANVIL Cap has a 1/2 in NPT threaded connection, is made of malleable iron, and is rated for a maximum operating pressure of 2,000 psi at 150° F. The manufacturer part number is 0318901303. It is designed for high-pressure pipe systems requiring a durable, leak-resistant closure.
Where to buy the ANVIL Cap worldwide?
3G Electric supplies the ANVIL Cap worldwide, handling full logistics and customs clearance for international orders. As a global industrial solutions provider, we source genuine ANVIL fittings and deliver them to your facility, ensuring compliance with local import requirements.
How to install the ANVIL Cap?
To install the ANVIL Cap, apply thread sealant or PTFE tape to the male pipe threads, then hand-tighten the cap onto the pipe end. Use a wrench to snug the cap securely, but avoid overtightening to prevent damage to the malleable iron. Always verify pressure ratings before installation.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
