ANVIL Cap: 1 1/2 in, NPT Threaded, 2,000 psi @ 150° F, Malleable Iron
The ANVIL Cap is a threaded high-pressure pipe fitting, type NPT Threaded, 2,000 psi @ 150° F, Malleable Iron, Cap, with a 1 1/2 in size and maximum operating pressure of 2,000 psi @ 150° F (MPN 0318901386). 3G…
SKU 3G-OTH-466623
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is a threaded high-pressure pipe fitting, type NPT Threaded, 2,000 psi @ 150° F, Malleable Iron, Cap, with a 1 1/2 in size and maximum operating pressure of 2,000 psi @ 150° F (MPN 0318901386). 3G Electric interprets demand and delivers this genuine industrial fitting across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Cap used for?
The ANVIL Cap seals the end of a threaded NPT pipe in high-pressure systems up to 2,000 psi @ 150° F. It is commonly used in industrial plumbing, steam, and hydraulic lines where a durable, leak-proof closure is required. 3G Electric supplies this fitting across 14 industrial departments.
What are the specifications of the ANVIL Cap?
The ANVIL Cap is a 1 1/2 in NPT threaded fitting made of malleable iron, rated for a maximum operating pressure of 2,000 psi @ 150° F. The manufacturer part number is 0318901386. 3G Electric sources this genuine ANVIL fitting for global delivery.
Where to buy the ANVIL Cap worldwide?
3G Electric supplies the ANVIL Cap worldwide, handling full logistics and customs clearance for international orders. As a global industrial solutions provider, we source genuine ANVIL fittings and deliver them to your facility. Contact us for availability and lead time.
How to install the ANVIL Cap?
Apply pipe thread sealant or PTFE tape to the male NPT threads, then hand-tighten the ANVIL Cap onto the pipe. Use a wrench for final tightening, but avoid over-torquing malleable iron to prevent cracking. Always verify pressure rating compatibility with your system.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
