ANVIL Cap: 2 in, NPT Threaded, 2,000 psi @ 150° F, Malleable Iron
The ANVIL Cap is a 2-inch NPT threaded high-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 2,000 psi at 150° F. This cap provides a reliable closure for threaded piping…
SKU 3G-OTH-466784
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is a 2-inch NPT threaded high-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 2,000 psi at 150° F. This cap provides a reliable closure for threaded piping systems, backed by ANVIL's manufacturing standards.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL 2-inch NPT threaded cap used for?
The ANVIL cap is used to seal the end of a 2-inch NPT threaded pipe in high-pressure systems. It provides a reliable closure for piping in industrial applications such as steam, water, oil, and gas lines, where a maximum operating pressure of 2,000 psi at 150° F is required.
What are the specifications of the ANVIL cap 0318901402?
The ANVIL cap has a 2-inch NPT thread, is made of malleable iron, and is rated for a maximum operating pressure of 2,000 psi at 150° F. The manufacturer part number is 0318901402. It is designed for high-pressure threaded piping systems and is manufactured to ANVIL's quality standards.
Where to buy the ANVIL 2-inch NPT cap worldwide?
3G Electric supplies the ANVIL 2-inch NPT threaded cap (MPN 0318901402) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this malleable iron pipe fitting.
How to install an ANVIL malleable iron pipe cap?
To install the ANVIL cap, apply a suitable thread sealant to the male NPT pipe threads, then hand-tighten the cap onto the pipe. Use a wrench to snug the cap firmly—avoid overtightening, which can stress the malleable iron. Always verify the system is depressurized before installation.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
