ANVIL Cap: 2 1/2 in, NPT Threaded, 2,000 psi @ 150° F, Malleable Iron
The ANVIL Cap is a 2 1/2 in NPT threaded high-pressure pipe fitting, made of malleable iron, with a maximum operating pressure of 2,000 psi @ 150° F. This cap is designed to seal pipe ends in industrial systems…
SKU 3G-OTH-466591
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is a 2 1/2 in NPT threaded high-pressure pipe fitting, made of malleable iron, with a maximum operating pressure of 2,000 psi @ 150° F. This cap is designed to seal pipe ends in industrial systems requiring reliable pressure containment.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL 2 1/2 in NPT threaded cap used for?
The ANVIL cap seals the end of a 2 1/2 in NPT threaded pipe in high-pressure industrial systems. It is made of malleable iron and rated for 2,000 psi at 150° F, making it suitable for steam, water, oil, and gas applications where reliable pressure containment is required.
What are the specifications of the ANVIL cap 0318901410?
The ANVIL cap (MPN 0318901410) is a 2 1/2 in NPT threaded fitting made of malleable iron. Its maximum operating pressure is 2,000 psi at 150° F. It is designed to seal pipe ends in high-pressure piping systems and is manufactured in the USA.
Where to buy the ANVIL 2 1/2 in cap worldwide?
3G Electric supplies the ANVIL 2 1/2 in NPT threaded cap (MPN 0318901410) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this high-pressure malleable iron pipe fitting.
How to install an ANVIL malleable iron pipe cap?
Apply a compatible thread sealant to the male NPT pipe threads. Hand-tighten the ANVIL cap onto the pipe end, then use a wrench to tighten an additional 1 to 2 turns. Do not overtighten, as malleable iron can crack. Always follow applicable piping codes for pressure ratings.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
