ANVIL Cap: 3 in, NPT Threaded, 2,000 psi @ 150° F, Malleable Iron
The ANVIL Cap is a 3-inch NPT threaded high-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 2,000 psi at 150° F. This cap is designed to seal the end of a threaded pipe in…
SKU 3G-OTH-466579
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is a 3-inch NPT threaded high-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 2,000 psi at 150° F. This cap is designed to seal the end of a threaded pipe in industrial piping systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL 3-inch NPT threaded cap used for?
The ANVIL cap seals the end of a 3-inch NPT threaded pipe in high-pressure industrial piping systems. It is commonly used in steam, water, oil, and gas applications where a durable, leak-proof closure is required. 3G Electric supplies this fitting globally.
What are the specifications of the ANVIL cap 0318901428?
The ANVIL cap (MPN 0318901428) is a 3-inch NPT threaded fitting made of malleable iron. It has a maximum operating pressure of 2,000 psi at 150° F. This high-pressure pipe cap is designed for reliable sealing in demanding industrial environments.
Where to buy the ANVIL 3-inch pipe cap worldwide?
3G Electric sources and delivers the ANVIL 3-inch NPT threaded cap (MPN 0318901428) to customers worldwide. We handle full logistics, customs clearance, and delivery, ensuring you receive the correct fitting for your high-pressure piping system.
How to install an ANVIL malleable iron pipe cap?
Apply a suitable thread sealant or PTFE tape to the male pipe threads. Hand-tighten the ANVIL cap onto the pipe end, then use a wrench for a final snug turn. Avoid over-tightening to prevent stress on the malleable iron fitting. Always follow system pressure ratings.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
