ANVIL Metal Pipe Elbow: 90° Elbow, 300 psi @ 150° F, 3/8 in x 3/8 in, Malleable Iron
The ANVIL Metal Pipe Elbow is a 90° elbow, medium-pressure threaded pipe fitting made of malleable iron. It is rated for a maximum operating pressure of 300 psi at 150° F, with a 3/8 in x 3/8 in size, and is…
SKU 3G-OTH-461927
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Elbow is a 90° elbow, medium-pressure threaded pipe fitting made of malleable iron. It is rated for a maximum operating pressure of 300 psi at 150° F, with a 3/8 in x 3/8 in size, and is manufactured in the USA (MPN 0311000608).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Metal Pipe Elbow used for?
The ANVIL Metal Pipe Elbow is a 90° fitting used to change the direction of medium-pressure piping systems in industrial plumbing, HVAC, and process lines. Its malleable iron construction and 300 psi @ 150° F rating make it suitable for steam, water, oil, and gas applications.
What are the specifications of the ANVIL Metal Pipe Elbow?
This ANVIL 90° elbow has a 3/8 in x 3/8 in size, a maximum operating pressure of 300 psi @ 150° F, and is made of malleable iron. It is manufactured in the USA with MPN 0311000608. The fitting uses threaded connections for medium-pressure service.
Where to buy the ANVIL Metal Pipe Elbow worldwide?
3G Electric supplies the ANVIL Metal Pipe Elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this malleable iron 90° elbow rated at 300 psi @ 150° F.
How to install the ANVIL Metal Pipe Elbow?
Install the ANVIL Metal Pipe Elbow by applying pipe thread sealant to the male threads and hand-tightening, then using wrenches on the fitting flats—avoid over-tightening malleable iron. Ensure the system is depressurized before installation and verify the 300 psi @ 150° F rating matches your application.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
