ANVIL Metal Pipe Elbow: 90° Elbow, 300 psi @ 150° F, 3 in x 3 in, Malleable Iron
The ANVIL Metal Pipe Elbow is a 90° elbow, medium-pressure threaded pipe fitting rated for 300 psi @ 150° F, with a 3 in x 3 in size, made of malleable iron and manufactured in the USA (MPN 0311017602).
SKU 3G-OTH-462555
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Elbow is a 90° elbow, medium-pressure threaded pipe fitting rated for 300 psi @ 150° F, with a 3 in x 3 in size, made of malleable iron and manufactured in the USA (MPN 0311017602).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Metal Pipe Elbow used for?
The ANVIL Metal Pipe Elbow is a 90° threaded fitting used in medium-pressure piping systems to change flow direction. It is commonly applied in industrial plumbing, HVAC, and process lines where malleable iron provides durability and corrosion resistance at pressures up to 300 psi @ 150° F.
What are the specifications of the ANVIL 90° Elbow?
This ANVIL 90° elbow has a 3 in x 3 in size, rated for 300 psi @ 150° F maximum operating pressure. It is made of malleable iron, manufactured in the USA, and carries MPN 0311017602. The fitting uses NPT threads for secure medium-pressure connections.
Where to buy ANVIL pipe fittings in worldwide?
3G Electric supplies ANVIL pipe fittings worldwide, including this 90° elbow. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this malleable iron fitting.
How to install an ANVIL threaded pipe elbow?
Apply pipe thread sealant or PTFE tape to the male threads, then hand-tighten the ANVIL elbow onto the pipe. Use two wrenches—one on the fitting, one on the pipe—to avoid over-torquing. Do not exceed 300 psi @ 150° F operating limits.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
