ANVIL Metal Pipe Elbow: 90° Elbow, 300 psi @ 150° F, 4 in x 4 in, Malleable Iron
The ANVIL Metal Pipe Elbow is a 90° elbow, medium-pressure threaded pipe fitting rated for 300 psi @ 150° F, with a 4 in x 4 in size, made of malleable iron and manufactured in the USA (MPN 0311017800).
SKU 3G-OTH-462472
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Elbow is a 90° elbow, medium-pressure threaded pipe fitting rated for 300 psi @ 150° F, with a 4 in x 4 in size, made of malleable iron and manufactured in the USA (MPN 0311017800).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Metal Pipe Elbow used for?
The ANVIL Metal Pipe Elbow is a 90° threaded fitting for medium-pressure piping systems. It redirects flow in industrial applications such as water, steam, or gas lines, rated for 300 psi at 150° F. 3G Electric supplies this malleable iron fitting across 14 industrial departments.
What are the specifications of the ANVIL 90° Elbow?
This ANVIL elbow is a 4 in x 4 in, 90° threaded fitting made of malleable iron. It has a maximum operating pressure of 300 psi at 150° F and is manufactured in the USA (MPN 0311017800). 3G Electric sources this fitting for global industrial maintenance and piping projects.
Where to buy ANVIL pipe fittings in worldwide?
3G Electric supplies ANVIL pipe fittings worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source this 90° malleable iron elbow (MPN 0311017800) and deliver to any location. Contact us for availability and lead time.
How to install an ANVIL threaded pipe elbow?
Apply pipe thread sealant to the male threads, hand-tighten the ANVIL elbow, then use wrenches on both the fitting and pipe to avoid over-torquing. Ensure the joint is aligned before final tightening. 3G Electric recommends following standard piping practices for 300 psi systems.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
