ANVIL Metal Pipe Elbow: 45° Elbow, 300 psi @ 150° F, 1/8 in x 1/8 in, Malleable Iron
The ANVIL Metal Pipe Elbow is a 45° elbow, medium-pressure threaded pipe fitting rated for 300 psi @ 150° F. It features a 1/8 in x 1/8 in size, is made of malleable iron, and is manufactured in the USA (MPN 0311022800).
SKU 3G-OTH-462325
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Elbow is a 45° elbow, medium-pressure threaded pipe fitting rated for 300 psi @ 150° F. It features a 1/8 in x 1/8 in size, is made of malleable iron, and is manufactured in the USA (MPN 0311022800).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Metal Pipe Elbow used for?
The ANVIL Metal Pipe Elbow is a 45° fitting used to change flow direction in medium-pressure piping systems. It is suitable for steam, water, gas, and air lines in industrial plants, commercial buildings, and HVAC applications where a 300 psi @ 150° F rating is required.
What are the specifications of the ANVIL 45° Elbow?
This ANVIL 45° elbow has a maximum operating pressure of 300 psi @ 150° F, a 1/8 in x 1/8 in size, and is made of malleable iron. It is manufactured in the USA with MPN 0311022800. The fitting uses NPT threads for medium-pressure connections.
Where to buy the ANVIL Metal Pipe Elbow worldwide?
3G Electric supplies the ANVIL Metal Pipe Elbow (MPN 0311022800) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this malleable iron 45° elbow rated at 300 psi @ 150° F.
How to install the ANVIL 45° Malleable Iron Elbow?
Apply pipe thread sealant to the male NPT threads and hand-tighten the ANVIL elbow into the female fitting. Use two wrenches to snug the connection—avoid overtightening to prevent stress on the malleable iron. Test the joint at operating pressure before placing the system into service.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
