ANVIL Metal Pipe Elbow: 45° Elbow, 300 psi @ 150° F, 3/4 in x 3/4 in, Malleable Iron
The ANVIL Metal Pipe Elbow is a 45° elbow, medium-pressure threaded pipe fitting rated at 300 psi @ 150° F, with a 3/4 in x 3/4 in size, made of malleable iron and manufactured in the USA (MPN 0311023600).
SKU 3G-OTH-462003
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Elbow is a 45° elbow, medium-pressure threaded pipe fitting rated at 300 psi @ 150° F, with a 3/4 in x 3/4 in size, made of malleable iron and manufactured in the USA (MPN 0311023600).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is an ANVIL 45° metal pipe elbow used for?
This ANVIL 45° elbow redirects flow in medium-pressure piping systems rated at 300 psi @ 150° F. It is commonly used in steam, water, gas, and oil lines across industrial plants, commercial buildings, and HVAC applications where a 45-degree directional change is needed.
What are the specifications of the ANVIL 3/4 in pipe elbow?
The ANVIL metal pipe elbow is a 45° fitting with 3/4 in x 3/4 in threaded connections, rated for 300 psi @ 150° F. It is made of malleable iron, manufactured in the USA, and carries MPN 0311023600. This medium-pressure fitting suits steam, water, and gas service.
Where to buy ANVIL pipe fittings in worldwide?
3G Electric supplies ANVIL pipe fittings like this 45° elbow to customers worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your site. Contact us for a quote on MPN 0311023600 or other ANVIL malleable iron fittings.
How to install an ANVIL malleable iron 45° elbow?
Apply pipe thread sealant or PTFE tape to male threads before hand-tightening the ANVIL elbow. Use two wrenches—one on the fitting, one on the pipe—to avoid over-torquing. Do not exceed 300 psi @ 150° F. For threaded joints, ensure proper alignment to prevent leaks.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
