ANVIL Metal Pipe Straight: Union, 300 psi @ 150° F, 1/4 in x 1/4 in, Malleable Iron
The ANVIL Metal Pipe Straight: Union is a medium-pressure threaded pipe fitting, available as a 1/4 in x 1/4 in union made of malleable iron. It is rated for a maximum operating pressure of 300 psi at 150° F and is…
SKU 3G-OTH-461897
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Straight: Union is a medium-pressure threaded pipe fitting, available as a 1/4 in x 1/4 in union made of malleable iron. It is rated for a maximum operating pressure of 300 psi at 150° F and is manufactured in the USA (MPN 0313822025).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Metal Pipe Straight Union used for?
The ANVIL Metal Pipe Straight Union connects two male-threaded pipes in a straight run, allowing easy disconnection for maintenance or repair. It is used in medium-pressure industrial piping systems for water, air, or steam, rated at 300 psi at 150° F.
What are the specifications of the ANVIL 1/4 in pipe union?
This ANVIL union is a 1/4 in x 1/4 in straight fitting made of malleable iron, with a maximum operating pressure of 300 psi at 150° F. It is a medium-pressure threaded pipe fitting, manufactured in the USA, with MPN 0313822025.
Where to buy ANVIL pipe unions worldwide?
3G Electric supplies ANVIL pipe unions worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source genuine ANVIL fittings like this 1/4 in malleable iron union and deliver to your site. Contact us for availability and lead time.
How to install an ANVIL malleable iron pipe union?
Apply pipe thread sealant to both male threads, then hand-tighten the union nut onto each pipe end. Use two wrenches—one on the union body, one on the nut—to achieve a leak-free seal without overtightening. Follow standard piping practices for medium-pressure systems up to 300 psi.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
