ANVIL Metal Pipe Straight: Union, 300 psi @ 150° F, 1/2 in x 1/2 in, Malleable Iron
The ANVIL Metal Pipe Straight: Union is a medium-pressure threaded pipe fitting rated for 300 psi @ 150° F, with a 1/2 in x 1/2 in size, made of malleable iron and manufactured in the USA (MPN 0313822066).
SKU 3G-OTH-461955
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Straight: Union is a medium-pressure threaded pipe fitting rated for 300 psi @ 150° F, with a 1/2 in x 1/2 in size, made of malleable iron and manufactured in the USA (MPN 0313822066).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Metal Pipe Straight Union used for?
The ANVIL Metal Pipe Straight Union connects two male-threaded pipes in a straight run, allowing easy disassembly for maintenance or repair. It is rated for medium-pressure applications up to 300 psi at 150 °F, commonly used in industrial plumbing, steam, and process piping systems.
What are the specifications of the ANVIL 1/2 in pipe union?
This ANVIL union has a 1/2 in x 1/2 in size, maximum operating pressure of 300 psi at 150 °F, and is made of malleable iron. It is manufactured in the USA with MPN 0313822066. The threaded ends are compatible with standard NPT pipe threads for medium-pressure systems.
Where to buy ANVIL pipe unions worldwide?
3G Electric supplies ANVIL pipe unions to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine ANVIL fittings and support procurement teams across 14 departments, including combustion, pumps, and controls.
How to install an ANVIL malleable iron pipe union?
Apply pipe thread sealant to both male pipe ends. Hand-tighten the union nut onto one pipe, then align the second pipe and tighten the nut with wrenches. Do not overtighten. For 300 psi systems, verify threads are clean and use a backup wrench to avoid stress on the fitting.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
